Fantech CG73 Mid Tower Gaming PC Case User Manual

1. Introduktion

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Fantech CG73 Mid Tower Gaming PC Case. Please read this manual thoroughly before beginning assembly or use to ensure proper functionality and safety.

2. Sikkerhedsoplysninger

• Always disconnect the power supply from the wall outlet before installing or removing any components inside the PC case.
• Handle all components with care to prevent damage from static electricity. Consider using an anti-static wrist strap.
• Hold små dele og emballagematerialer væk fra børn.
• Sørg for tilstrækkelig ventilation omkring pc-kabinettet for at forhindre overophedning.
• Do not expose the case to water or excessive humidity.
• The tempered glass panel is fragile; handle with extreme care to avoid breakage.

3. Pakkens indhold

Bekræft at alle varer er til stede i din pakke:

• Fantech CG73 Mid Tower Gaming PC Case
• 4 x Pre-installed RGB Fans
• Tilbehørsæske (skruer, kabelbindere, afstandsstykker osv.)
• Brugervejledning (dette dokument)

4. Produktet er slutview

Familiarize yourself with the key features and components of the Fantech CG73 PC case.

Figur 4.1: Front view of the Fantech CG73 Mid Tower Gaming PC Case, showcasing the hexagonal design and pre-installed RGB fans.

4.1 Fan Support and Cooling

The HEXA CG73 case supports up to 6 RGB fans, providing extreme heat transfer and vibrant RGB lighting. It comes with 4 pre-installed fans.

Figur 4.2: Indre view highlighting fan installation points: 1. Rear fan, 2. Top fans, 3. Front fans, 4. Bottom fans. The case includes 4 pre-installed fans.

4.2 Inner Structure and Motherboard Compatibility

The CG73 case is designed to accommodate various motherboard form factors and storage devices.

Figur 4.3: Internal layout showing support for ATX, Micro-ATX, and Mini-ITX motherboards, along with dedicated installation locations for 1 SSD and 1 HDD.

4.3 Component Clearance

Ensure your components fit within the case's maximum supported dimensions.

Figur 4.4: Component clearance specifications: Maximum GPU length of 300mm, maximum CPU cooler height of 165mm. Supports ATX, Mini-ITX, and Micro-ATX motherboards. Motherboard and GPU are not included.

4.4 Handy I/O Ports

The top-front panel provides convenient access to essential ports.

Figur 4.5: Top-front I/O panel featuring one USB 3.0 port and two USB 2.0 ports for direct access, along with audio jacks and power/reset buttons.

5. Opsætning og installation

Follow these steps to install your PC components into the Fantech CG73 case.

1. Forbered sagen: Carefully remove the side panels. The tempered glass panel should be handled with extreme care.
2. Installer bundkort: Align your ATX, Micro-ATX, or Mini-ITX motherboard with the standoffs inside the case. Secure it with the provided screws.
3. Installer CPU-køler: If not already installed, mount your CPU cooler. Ensure it does not exceed the maximum height of 165mm.
4. Installer grafikkort (GPU): Insert your GPU into the appropriate PCIe slot on the motherboard. Ensure it does not exceed the maximum length of 300mm. Secure it with screws.
5. Installer lagerdrev:
   • SSD'er: Mount 2.5-inch SSDs in the designated SSD trays/mounts.
   • HDD'er: Mount 3.5-inch HDDs in the HDD cage.
   Secure all drives with the appropriate screws.
6. Installer strømforsyning (PSU): Slide your PSU into the dedicated compartment at the bottom of the case. Secure it with screws from the rear.
7. Kabelstyring: Route all power cables and data cables through the cable management cutouts to the back of the motherboard tray. Connect them to the respective components. Ensure fan and RGB cables are connected to the motherboard or a fan controller.
8. Genmonter paneler: Once all components are installed and cables are managed, carefully reattach the side panels.

6. Betjeningsvejledning

After assembly, connect your peripherals and power on your system.

• Tænd: Connect the power cable to your PSU and a wall outlet. Press the power button on the top-front I/O panel.
• RGB kontrol: The pre-installed RGB fans are typically controlled via your motherboard's RGB software (if connected to an RGB header) or a dedicated RGB controller (if included or purchased separately). Refer to your motherboard manual for specific RGB software instructions.
• USB-porte: Use the USB 3.0 and USB 2.0 ports on the top panel for connecting external devices.
• Lydstik: Connect your headphones and microphone to the audio jacks on the top panel.

7. Vedligeholdelse

Regelmæssig vedligeholdelse er med til at sikre optimal ydeevne og levetid for dit pc-kabinet og komponenter.

• Støvrensning: Periodically clean dust filters (if present) and internal components using compressed air. Ensure the system is powered off and unplugged before cleaning.
• Rengøring af ventilator: Gently clean fan blades with a soft brush or compressed air to prevent dust buildup, which can impede airflow.
• Udvendig rengøring: Tør ydersiden af ​​kabinettet af med en blød, tør klud.amp cloth. Avoid abrasive cleaners or solvents. For the tempered glass, use a glass cleaner and a microfiber cloth.
• Kabelhåndteringstjek: Occasionally check cable routing to ensure no cables are obstructing airflow or fan operation.

8. Fejlfinding

Dette afsnit omhandler almindelige problemer, du kan støde på.

9. Specifikationer

10. Garanti og support

For warranty information and technical support, please refer to the official Fantech webwebstedet eller kontakt din lokale forhandler. Gem din købsbevis til garantikrav.

For yderligere hjælp, besøg: www.fantechworld.com