1. Introduktion
This manual provides detailed instructions for the proper use and maintenance of your INKBIRDPLUS AK3 Indoor Air Quality Monitor. This device is designed to accurately detect and display levels of Carbon Dioxide (CO2), Volatile Organic Compounds (TVOC), Formaldehyde (HCHO), temperature, and relative humidity in real-time. Please read this manual thoroughly before operating the device to ensure optimal performance and longevity.
Figure 1: INKBIRDPLUS AK3 Air Quality Monitor displaying various environmental parameters.
2. Produktet er slutview
2.1 Nøglefunktioner
- Måling i realtid: Detects Carbon Dioxide (CO2), Volatile Organic Compounds (TVOC), Formaldehyde (HCHO), temperature, and humidity with real-time updates on a colorful display.
- Høj nøjagtighed: Utilizes a high-precision infrared sensor and a built-in high-performance chip for accurate CO2 measurements.
- Smart Alarm System: Provides visual (color indicator) and audible alerts for different air quality levels (GOOD, OK, POOR).
- Lang batterilevetid: Equipped with a 1200mAh built-in lithium battery, offering 6 to 8 hours of operation on a full charge. Can also operate while connected to power.
- Bred anvendelse: Suitable for monitoring air quality in various indoor environments such as homes, offices, schools, hospitals, and restaurants.
2.2 Enhedskomponenter
The INKBIRDPLUS AK3 monitor features a clear 3.5-inch LCD screen for easy readability and intuitive display of all measured parameters.
Figur 2: Overview of the parameters measured by the monitor.
3. Opsætning og første brug
3.1 Opladning af enheden
Before first use, fully charge the monitor. Connect the provided USB cable to the device's charging port and a suitable USB power adapter (not included). A full charge takes approximately 2.5 hours and provides 6 to 8 hours of continuous operation. The device can be used while charging.
Figure 3: Charging the INKBIRDPLUS AK3 monitor.
3.2 Tænd/sluk
To power on the device, press and hold the power button located on the side or back of the unit until the display illuminates. To power off, press and hold the power button again until the display turns off.
4. Betjeningsvejledning
4.1 Vis aflæsninger
The 3.5-inch LCD screen displays the following parameters:
- CO2 (Carbon Dioxide): Measured in parts per million (ppm).
- TVOC (Total Volatile Organic Compounds): Measured in milligrams per cubic meter (mg/m³).
- HCHO (formaldehyd): Measured in milligrams per cubic meter (mg/m³).
- Temperatur: Displayed in Celsius or Fahrenheit.
- Relativ luftfugtighed: Vises som en procentdeltage (%).
Readings are updated every second. For accurate assessment of overall air quality, it is recommended to observe measurements over a period of at least 60 minutes, as air conditions can fluctuate.
4.2 Luftkvalitetsindikator
The device categorizes air quality into three levels, indicated by color and audible alerts:
- GODT: Green indicator. Air quality is within acceptable limits.
- OK: Yellow indicator. The device will sound "Bee--Bee" twice. This indicates that air quality is deteriorating and attention may be required.
- FATTIGE: Red indicator. The device will sound "Bee--Bee--Bee" twice. This indicates poor air quality, and action should be taken, such as ventilation.
5. Placement and Application
The INKBIRDPLUS AK3 monitor is versatile and can be used in various indoor settings. For best results, place the monitor in a central location within the area you wish to monitor, away from direct drafts, heat sources, or areas with high moisture.
Figur 4: Eksamples of suitable application environments for the monitor.
The device features an anti-slip bottom for stable placement on flat surfaces and a hook design for hanging, offering flexible installation options.
Figure 5: Anti-slip bottom and hook design for versatile placement.
6. Vedligeholdelse
- Keep the device clean by wiping it with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Avoid blocking the ventilation openings on the device, as this can affect measurement accuracy.
- Opbevar skærmen på et køligt, tørt sted, når den ikke er i brug.
- Udsæt ikke enheden for ekstreme temperaturer, direkte sollys eller høj luftfugtighed.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden tænder ikke. | Lavt batteri eller ingen strøm. | Charge the device using the USB cable. Ensure the power adapter is working. |
| Unøjagtige eller svingende aflæsninger. | Sensor interference, device not calibrated, or environmental changes. | Ensure the device is placed away from direct drafts, strong odors, or heat sources. Allow the device to stabilize for at least 60 minutes. If issues persist, contact support. |
| Ingen hørbar alarm. | Alarm function may be disabled or volume is too low. | Check device settings to ensure the alarm is enabled. Refer to the full product manual for specific button functions to adjust alarm settings. |
8. Specifikationer
| Parameter | Værdi |
|---|---|
| Modelnummer | AK3 (CO2 Monitor) |
| Mærke | Inkbird |
| Dimensioner | 13.8 x 10.2 x 7.2 cm |
| Varens vægt | 224 g |
| CO2-måleområde | 350~2000 ppm |
| TVOC-måleområde | 0.000-2.000 mg/m³ |
| HCHO-måleområde | 0.000-1.000 mg/m³ |
| Temperaturmåleområde | 0°C~99°C |
| Fugtmåleområde | 0~99% RH |
| Batteri | 1200mAh indbygget lithiumbatteri |
| Batterilevetid | 6-8 timer (fuldt opladet) |
| Opladningstid | Ca. 2.5 timer |
| Strømkilde | AC/DC (USB powered) |
| Vise | 3.5-tommer LCD-farveskærm |
9. Garanti og support
The INKBIRDPLUS AK3 Air Quality Monitor comes with a standard manufacturer's warranty. For specific warranty details, please refer to the warranty card included with your product or visit the official Inkbird website. For technical support, troubleshooting assistance, or any inquiries regarding your device, please contact Inkbird customer service through their official channels.
Kontaktoplysninger: Please refer to the packaging or the official Inkbird webhjemmeside for de mest opdaterede kontaktoplysninger.
