Makita GA023GM201 40V max batteridrevet vinkelsliber brugsanvisning

1. Introduktion

This manual provides essential information for the safe and effective operation, maintenance, and setup of your Makita GA023GM201 40V max Cordless Angle Grinder. Please read this manual thoroughly before using the tool to ensure proper handling and to prevent injury or damage. Keep this manual accessible for future reference.

The Makita GA023GM201 is a high-performance 125 mm (5 inch) cordless angle grinder designed for heavy-duty grinding and cutting applications. It features a 40V max Li-ion XGT battery system, offering superior power and runtime.

2. Sikkerhedsinstruktioner

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. This section outlines general power tool safety warnings and specific safety rules for angle grinders.

Generelle sikkerhedsadvarsler for elværktøj

• Sikkerhed på arbejdsområdet: Hold arbejdsområdet rent og godt oplyst. Rodede eller mørke områder indbyder til ulykker. Brug ikke elværktøj i eksplosive atmosfærer, f.eks. i nærheden af ​​brandfarlige væsker, gasser eller støv.
• Elektrisk sikkerhed: Undgå kropskontakt med jordforbundne overflader. Udsæt ikke elværktøj for regn eller våde forhold.
• Personlig sikkerhed: Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. Always wear appropriate personal protective equipment (PPE), including eye protection, hearing protection, dust mask, and heavy-duty gloves.
• Brug og vedligeholdelse af elværktøj: Tving ikke elværktøjet. Brug det korrekte elværktøj til din opgave. Frakobl batteriet fra elværktøjet, før du foretager justeringer, skifter tilbehør eller opbevarer elværktøjet.

Specifikke sikkerhedsadvarsler for vinkelslibere

• Always use the correct type of grinding wheel for the material and application.
• Sørg for, at hjulbeskytteren er korrekt monteret og justeret for at opnå maksimal sikkerhed.
• Never use a damaged or cracked grinding wheel. Inspect wheels before each use.
• Hold godt fast i værktøjet med begge hænder under drift.
• Vær opmærksom på tilbageslag, som er en pludselig reaktion på et klemt eller fastlåst roterende hjul.
• Do not touch the workpiece immediately after grinding as it will be hot.

3. Pakkens indhold

Your Makita GA023GM201 Cordless Angle Grinder package should contain the following items:

• Makita GA023GM201 Cordless Angle Grinder
• 2 x 40V max / 4.0 Ah Lithium-ion Batteries
• Batterioplader
• MAKPAC Carrying Case
• Sidehåndtag
• Hjulbeskyttelse
• Grinding Wheel (initial)
• Instruktionsmanual (dette dokument)

Image 3.1: Complete Makita GA023GM201 kit including the angle grinder, two 40V max batteries, a battery charger, and a MAKPAC system case for storage and transport.

4. Opsætning

4.1 Opladning af batteriet

Before first use, fully charge the Lithium-ion batteries. Connect the charger to a power outlet and insert the battery pack. The charger indicator lights will show the charging status. Refer to the charger's separate manual for detailed instructions.

4.2 Installation/fjernelse af batteriet

• To install: Align the battery pack with the battery housing on the tool and slide it in until it clicks into place.
• Sådan fjernes: Tryk på udløserknappen på batteripakken, og skub den ud af værktøjet.

4.3 Montering af sidehåndtaget

Screw the side handle into one of the threaded holes on the gear housing. Ensure it is tightened securely. The handle can be positioned on either side for left or right-handed operation.

4.4 Installing/Removing Grinding Wheels

• Sørg for, at værktøjet er slukket, og at batteriet er fjernet.
• Tryk på spindellåseknappen for at fastgøre spindlen.
• Brug den medfølgende skruenøgle til at løsne og fjerne låsemøtrikken.
• Place the desired grinding wheel onto the inner flange, ensuring it is centered.
• Thread the lock nut back on and tighten it securely with the wrench while holding the spindle lock button.
• For at fjerne, vend disse trin om.

4.5 Justering af hjulbeskyttelsen

The wheel guard can be adjusted without tools. Loosen the clamp lever, rotate the guard to the desired position to protect against sparks and debris, and then tighten the clamp lever firmly.

5. Betjeningsvejledning

5.1 Tænd/sluk

• To start the tool, slide the lock-off lever (if present) and then depress the trigger switch.
• Slip udløserkontakten for at stoppe værktøjet.

5.2 Variabel hastighedskontrol

The GA023GM201 features variable speed control, allowing you to adjust the rotation speed (up to 8500 RPM) to match the material being worked and the specific application. Use the speed dial or control button to select the appropriate speed setting.

5.3 AWS (Auto-start Wireless System) Function

This tool is equipped with AWS, which allows it to wirelessly connect to compatible Bluetooth-enabled dust extractors. When the grinder is switched on, the dust extractor will automatically start, and when the grinder is switched off, the dust extractor will stop after a short delay. Refer to the AWS module manual for pairing instructions.

5.4 Grinding Techniques

• Hold altid kværnen fast med begge hænder.
• Lad skiven nå fuld hastighed, før den berører emnet.
• Apply moderate pressure; excessive force can reduce efficiency and damage the wheel or tool.
• Maintain a consistent angle for even material removal.

Image 5.1: The Makita GA023GM201 angle grinder being used to grind a surface, demonstrating its powerful operation and the importance of proper handling.

6. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer optimal ydeevne og forlænger levetiden på dit værktøj.

6.1 Rengøring

• Frakobl altid batteriet før rengøring.
• Clean the tool's ventilation openings regularly to prevent overheating. Use a soft brush or compressed air.
• Tør ydersiden af ​​med en blød, damp klæde. Brug ikke skrappe kemikalier eller opløsningsmidler.

6.2 Inspektion af komponenter

• Regularly inspect the grinding wheel for wear, cracks, or damage. Replace as needed.
• Check the wheel guard for any damage or looseness.
• Ensure the side handle is securely fastened.

6.3 Pleje af batterier

• Opbevar batterier et køligt, tørt sted væk fra direkte sollys og varme.
• Do not store fully discharged batteries for extended periods. Charge them periodically.
• Undgå at tabe batterier eller udsætte dem for stød.

7. Fejlfinding

Dette afsnit omhandler almindelige problemer, du kan støde på med din vinkelsliber.

Hvis du støder på problemer, der ikke er nævnt her, eller hvis løsningerne ikke løser problemet, bedes du kontakte Makitas kundesupport eller et autoriseret servicecenter.

8. Specifikationer

9. Garanti og support

Makita products are manufactured to high-quality standards and are warranted against defects in materials and workmanship. The specific warranty period and terms may vary by region and product type. Please refer to the warranty card included with your product or visit the official Makita webwebstedet for detaljerede garantioplysninger.

For technical support, service, or spare parts, please contact your local authorized Makita service center or the retailer from whom you purchased the product. When contacting support, please have your model number (GA023GM201) and serial number ready.

You can find contact information for Makita customer service and authorized service centers on the official Makita webwebsted: www.makita.com