Bushnell CelluCORE 20 Cellular Trail Camera Instruction Manual

Indledning

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Bushnell CelluCORE 20 Cellular Trail Camera. Please read this manual thoroughly before using your device to ensure optimal performance and longevity.

Sikkerhedsoplysninger

• Use only specified battery types (12 AA alkaline batteries).
• Bland ikke gamle og nye batterier eller forskellige typer batterier.
• Ensure the camera is securely mounted to prevent falling and potential damage or injury.
• Hold kameraet væk fra ekstreme temperaturer og direkte sollys i længere perioder.
• Avoid exposing the camera to excessive moisture or submerging it in water, despite its weather-resistant design.

Pakkens indhold

• Bushnell CelluCORE 20 Cellular Trail Camera
• Antenne
• Monteringsstrop
• Instruktionsmanual

Produkt overview

The Bushnell CelluCORE 20 is a high-performance cellular trail camera designed for remote monitoring. It captures 20 MP still images and HD video, featuring an 80-foot night range with low-glow LEDs for discreet operation. The camera transmits images and videos directly to your mobile device via a cellular network, allowing for real-time monitoring and remote management through a dedicated app.

Figur 1: Front view of the Bushnell CelluCORE 20 Cellular Trail Camera.

Figur 2: Key features of the camera, including 80ft night range, low-glow LEDs, sub-1 second trigger speed, 20MP images, and solar compatibility.

Opsætning

1. Batteriinstallation

The camera requires 12 AA alkaline batteries for operation. For optimal performance and extended battery life (up to 6 months), it is recommended to use high-quality alkaline or lithium batteries.

1. Åbn kamerahuset ved at løsne sideklipsene.
2. Locate the removable battery tray inside the camera.
3. Insert 12 AA batteries into the tray, ensuring correct polarity (+/-).
4. Slide the battery tray back into the camera until it clicks into place.

Figur 3: Removable battery tray for easy battery changes.

2. Installation af SD-kort

A Class 10 SD card (up to 32GB recommended) is required to store images and videos. The camera does not typically include an SD card.

1. With the camera housing open, locate the SD card slot.
2. Insert the SD card into the slot with the label facing up until it clicks.
3. For at fjerne det, tryk forsigtigt på kortet, indtil det springer ud.

Figur 4: SD card slot and internal controls for the camera.

Figur 5: SD card and battery tray visible inside the camera.

3. Antennetilslutning

The antenna is crucial for cellular signal transmission.

1. Locate the antenna port on the top of the camera.
2. Screw the antenna clockwise onto the port until it is finger-tight. Do not overtighten.

Figur 6: Front view af kameraet med antennen korrekt monteret.

4. Montering af kameraet

The camera can be mounted to a tree or post using the provided strap.

1. Thread the mounting strap through the slots on the back of the camera.
2. Secure the camera to a sturdy tree or post at the desired height and angle.
3. Ensure the camera is stable and pointed towards the area you wish to monitor.

5. App Setup and Cellular Activation

To utilize the cellular features, download the Bushnell Trail Cameras app and activate your camera.

1. Download the "Bushnell Trail Cameras" app from your smartphone's app store.
2. Follow the in-app instructions to create an account and add your camera. This typically involves scanning a QR code on the camera.
3. Select a cellular data plan through the app. The camera supports Verizon networks.
4. Once activated, you can configure camera settings and receive images/videos remotely.

Betjeningsvejledning

1. Tænd/sluk

• For at tænde skal du skubbe tænd/sluk-knappen til "ON"-positionen.
• For at slukke skal du skubbe ON/OFF-knappen til "OFF"-positionen.
• The "Wake Up" button can be used to temporarily activate the camera for status checks without fully powering it on.

2. Understanding Indicator Lights

The camera features indicator lights to communicate its status:

3. Billed- og videooptagelse

The camera automatically captures images or videos when motion is detected within its range. Settings for capture mode (photo, video, photo+video), resolution, and trigger interval can be adjusted via the Bushnell Trail Cameras app.

Figur 7: Example of a daylight image captured by the camera.

Figur 8: Example of a night vision image captured by the camera, demonstrating its 80ft night range.

Opretholdelse

1. Udskiftning af batteri

Replace all 12 AA batteries when the battery indicator shows low power or when performance degrades. Always replace all batteries at once with new ones of the same type.

2. SD-kortstyring

Regularly check the SD card status via the app. When the card is full, replace it or format it (which will erase all data). It is recommended to format the SD card periodically to maintain optimal performance.

3. Rensning

Gently wipe the camera lens and sensor window with a soft, lint-free cloth. Do not use abrasive cleaners or solvents. Keep the housing seals clean and free of debris to maintain water resistance.

4. Vejrbeskyttelse

While the camera is designed for outdoor use (IP67 rated), prolonged exposure to extreme weather conditions can affect its lifespan. Ensure all latches are securely closed to prevent moisture intrusion. Consider additional protective measures in areas prone to heavy rain or snow.

Fejlfinding

• No Cellular Signal: Check antenna connection, ensure you are in a Verizon coverage area, and verify your data plan is active. Try repositioning the camera.
• Ingen billeder/videoer: Check battery level, ensure SD card is inserted correctly and not full, verify camera is powered on, and check motion sensor settings.
• Dårlig billedkvalitet: Clean the lens, check for obstructions, and ensure the camera is not too close or too far from the subject.
• Kort batterilevetid: Use high-quality alkaline or lithium batteries. Reduce the frequency of image/video capture or consider a solar panel accessory.
• Water Intrusion: Ensure all latches are fully closed and seals are free of debris. If water has entered, power off immediately, remove batteries and SD card, and allow to dry completely before attempting to use again.

Specifikationer

Garanti og support

This Bushnell CelluCORE 20 Cellular Trail Camera comes with a limited warranty. For detailed warranty information, product support, or service inquiries, please refer to the official Bushnell webwebstedet eller kontakt deres kundeservice. Gem din købsbevis til garantikrav.

For yderligere ressourcer og ofte stillede spørgsmål, besøg Bushnell Store on Amazon.