1. Introduktion
This manual provides essential information for the proper setup, operation, and maintenance of your Definitive Technology Descend DN12 12-inch Subwoofer. Please read these instructions thoroughly before connecting or operating your subwoofer to ensure optimal performance and safety.
2. Pakkens indhold
Bekræft, at din pakke indeholder følgende varer:
- Definitive Technology Descend DN12 12-inch Subwoofer
- Strømledning
- Fjernbetjening
- AAA-batterier (2) til fjernbetjening
- Brugervejledning (dette dokument)
3. Produktet er slutview
The Definitive Technology Descend DN12 is a high-performance 12-inch subwoofer designed to deliver powerful and accurate bass for both movies and music. It incorporates advanced technologies for superior sound reproduction.
3.1 Nøglefunktioner
- 3XR-arkitektur: Features dual 12-inch bass radiators pressure-coupled to a 12-inch active driver, providing three times the bass-radiating surface area of a traditional ported subwoofer. This design delivers louder, clearer low frequencies without port noise.
- 1500W Peak Class H Amplivligere: A powerful and efficient digital amplifier ensures dynamic and sustained bass output down to 25Hz.
- Advanced 56-bit DSP: Minimizes distortion and protects the woofer at high volumes, ensuring clean and controlled bass.
- Intelligent Phase Control: Offers 360 degrees of customizable phase adjustment for seamless blending with your main speakers.
- Built-in EQ Modes: Selectable Flat, Deep, and Loud EQ modes allow for optimization based on listening preferences and content.
3.2 Subwoofer-komponenter
4. Opsætning
4.1 Placering
The placement of your subwoofer significantly impacts its performance. Experiment with different locations to find the best sound for your room. General guidelines:
- Hjørneplacering: Often provides the most output and impact, but can sometimes lead to boomy or uneven bass.
- Foran i rummet: Placing the subwoofer near your front speakers can improve integration and soundstage coherence.
- Placering på midtervæggen: Can offer a more balanced bass response than corner placement.
- Multiple Subwoofers: Using two or more subwoofers can provide smoother bass distribution throughout the listening area.
Ensure the subwoofer is placed on a stable, level surface. The included rubber feet help isolate vibrations.
4.2 Forbindelser
Before making any connections, ensure all audio components are powered off.
- LFE-indgang (anbefales til hjemmebiograf):
Connect a single RCA cable from the LFE or Subwoofer output of your AV receiver/processor to the LFE IN jack on the DN12. This connection bypasses the subwoofer's internal low-pass filter, allowing your receiver to manage bass management. - Line In (Stereo RCA):
For stereo systems or receivers without an LFE output, connect RCA cables from the pre-out (left and right) of your amplifier/receiver to the LINE IN (Left/Right) jacks on the DN12. In this configuration, the subwoofer's internal low-pass filter will be active. - High Level Input (Speaker Level):
Hvis din ampHvis liferen ikke har LFE- eller line-level-udgange, skal du tilslutte højttalerledningerne fra hovedhøjttalerudgangene på din amplifier to the HIGH LEVEL INPUT (Left/Right) binding posts on the DN12. Ensure correct polarity (+ to + and – to –).
4.3 Strømtilslutning
Once all audio connections are made, connect the supplied power cord to the AC power input on the subwoofer and then to a wall outlet. The subwoofer is designed for corded electric power.
5. Betjening af subwooferen
5.1 Tænd/sluk
The DN12 features a power switch on the rear panel with three settings:
- PÅ: The subwoofer remains continuously on.
- BIL: The subwoofer automatically turns on when an audio signal is detected and enters standby mode after a period of inactivity.
- 12V TRIGGER: The subwoofer powers on/off in conjunction with a 12V trigger signal from a compatible device (e.g., AV receiver).
5.2 Controls (Rear Panel & Remote)
The following controls are available on the rear panel and via the remote control:
- BIND: Justerer subwooferens samlede udgangsniveau. Start med et moderat niveau og juster det, så det passer til dine hovedhøjttalere.
- LAV PAS: Sets the upper frequency limit for the subwoofer. This is typically set between 80Hz and 120Hz, depending on your main speakers' low-frequency extension. If using the LFE input, this control is usually bypassed by the receiver's bass management.
- FASE: Adjusts the phase of the subwoofer output (0 to 360 degrees) to ensure it aligns acoustically with your main speakers. Experiment with settings to achieve the most coherent bass.
- EQ: Selects between three equalization modes: Flad (neutral response), Dyb (extended low-frequency response), and Højt (increased output for maximum impact).
- SKÆRM: Controls the brightness or turns off the front panel display.
5.3 Indledende opsætning og kalibrering
After connecting and powering on, perform the following steps:
- Set the subwoofer volume to a low level.
- If your AV receiver has an auto-calibration system (e.g., Audyssey, MCACC, YPAO), run it according to your receiver's instructions. This will automatically set volume, phase, and crossover frequency.
- If calibrating manually, play familiar audio content and adjust the subwoofer's VOLUME, LOW PASS, and PHASE controls until the bass blends seamlessly with your main speakers without being overly prominent or lacking.
6. Vedligeholdelse
To ensure the longevity and optimal performance of your DN12 Subwoofer, follow these maintenance guidelines:
- Rensning: Use a soft, dry cloth to clean the cabinet. Avoid abrasive cleaners, solvents, or harsh chemicals.
- Støv: Regularly dust the subwoofer to prevent accumulation, especially around the drivers and rear panel.
- Ventilation: Ensure adequate airflow around the subwoofer. Do not block the rear panel or place the unit in an enclosed space without proper ventilation.
- Miljø: Undgå at udsætte subwooferen for ekstreme temperaturer, fugtighed eller direkte sollys.
7. Fejlfinding
If you experience issues with your Descend DN12 Subwoofer, consult the following table for common problems and solutions.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen lyd fra subwooferen |
|
|
| Bass is weak or muddy |
|
|
| Brummende eller summende lyd |
|
|
| Subwoofer turns off unexpectedly |
|
|
8. Specifikationer
Detailed technical specifications for the Definitive Technology Descend DN12 Subwoofer:
| Feature | Specifikation |
|---|---|
| Modelnavn | DN12 |
| Højttaler type | Subwoofer |
| Bashøjttaler diameter | 12 tommer |
| Bas radiatorer | Dobbelt 12 tommer |
| Amplivligere Type | Klasse H Digital |
| Spidseffekt | 1500 watt |
| Frekvensrespons | 25 Hz (and higher, depending on low-pass filter setting) |
| DSP | Advanced 56-bit |
| Forbindelsesteknologi | Wired (RCA, High Level) |
| Indgange | LFE In, Line In (Left/Right RCA), High Level Input (Left/Right Binding Posts), 12V Trigger, IR Input, USB A (Service) |
| Kontrolmetode | Remote Control, Rear Panel Buttons, App (via compatible devices) |
| EQ-tilstande | Flat, Deep, Loud |
| Fasekontrol | 360 Degrees Adjustable |
| Produktmål (D x B x H) | 18.04" x 18.72" x 18.04" (45.82 cm x 47.55 cm x 45.82 cm) |
| Varens vægt | 65.9 pund (29.9 kg) |
| Farve | Sort |
| Strømkilde | Elektrisk med ledning |
| Medfølgende batterier | 2 AAA (til fjernbetjening) |
9. Garanti og support
Definitive Technology products are designed and manufactured to the highest quality standards. This product is covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Definitive Technology webwebsted.
For technical support, service inquiries, or to purchase replacement parts, please contact Definitive Technology customer service. Contact information can typically be found on the brand's official webwebstedet eller i din produkts emballage.
