Brugermanual til VOYEE Wireless Pro-controller

Indledning

This manual provides comprehensive instructions for the VOYEE Wireless Pro Controller, compatible with Nintendo Switch, Switch Lite, Switch OLED, and PC (wired mode). Please read this manual carefully before use to ensure optimal performance and longevity of your controller.

Nøglefunktioner:

• Compatible with Switch/Lite/OLED/PC Windows (wired mode).
• Programming Custom Buttons (M1/M2) for up to 16 key mappings.
• 3-level Turbo speed for enhanced gaming.
• 4-level Rumble Control and 6-axis Gyro Sensor for immersive gameplay.
• Ergonomisk design for komfortabel langvarig brug.
• Large capacity battery (600mAh) providing up to 15 hours of gaming.
• 33ft wireless control range.

Opsætningsvejledning

Pakkeindhold:

• 1 x VOYEE Pro Controller
• 1 x Type-C ladekabel
• 1 x Brugermanual (dette dokument)

Connecting to Nintendo Switch/Switch Lite/Switch OLED:

1. Ensure your Switch console is powered on and updated to the latest system version.
2. Vælg HOME-menuen Controllere > Skift greb/rækkefølge.
3. På controlleren skal du trykke på og holde Hjem-knap (husikon) og Y-knap simultaneously for 3-5 seconds until the 4 LED indicators start flashing rapidly.
4. Når den er tilsluttet, lyser den/de tilsvarende afspiller-LED('er) på controlleren konstant.

Tip: If connection is difficult, try connecting the controller to the Switch dock via the Type-C cable first, then disconnect the cable and turn the controller on. This can help establish the initial wireless connection.

Connecting to PC (Wired Mode):

1. Connect the controller to your PC using the provided Type-C USB cable.
2. The controller will be recognized as a standard gamepad.
3. Ensure necessary drivers are installed if prompted by your operating system.

Image: Visual guide for connecting the VOYEE controller to Nintendo Switch (wireless) and PC (wired).

Opladning af controlleren:

Connect the controller to a USB power source (e.g., Switch dock, PC, USB wall adapter) using the Type-C cable. The LED indicators will show charging status and turn off when fully charged. A full charge takes approximately 2-3 hours and provides 10-15 hours of runtime.

Image: The VOYEE Switch Controller in Red and Blue color scheme, showcasing dens ergonomiske design og knaplayout.

Image: Illustration of the controller's large capacity 600mAh battery, indicating 2-3 hours for full charge and 10-13 hours of runtime.

Betjeningsvejledning

Motion Control (6-Axis Gyro Sensor):

The built-in 6-axis gyro sensor allows for precise motion control in compatible games. Tilt and move the controller to interact with game environments and characters.

Image: A user holding the VOYEE controller, demonstrating the 6-axis gyro motion control feature in a racing game scenario.

Vibration Adjustment (Rumble Control):

The controller features 4-level adjustable vibration feedback. To cycle through vibration levels (None, Low, Medium, High), press and hold the Turbo-knap og tryk på Op-knap on the D-pad.

Image: Visual representation of the controller's 3-level vibration feature, showing different intensity levels for various in-game actions like collision, take-off, and fighting.

Turbofunktion:

The Turbo function allows for rapid, continuous input of a button press. There are 3 adjustable Turbo speeds.

Indstilling af turbo:

1. Tryk og hold på Turbo-knap.
2. While holding Turbo, press the button you wish to set to Turbo (e.g., A, B, X, Y, L, R, ZL, ZR).
3. Release both buttons. The selected button will now activate Turbo when held down.

Justering af turbohastighed:

1. Tryk og hold på Turbo-knap.
2. While holding Turbo, press the Højre knap on the D-pad to cycle through the 3 speeds (5 shots/s, 12 shots/s, 20 shots/s).

Rydning af Turbo:

1. To clear Turbo for a single button: Press and hold the Turbo-knap, then press the button that has Turbo enabled.
2. To clear all Turbo settings: Press and hold the Turbo-knap i 5 sekunder.

Image: Diagram illustrating the 3-level Turbo speed setting, showing how to activate and adjust the rapid fire function for various buttons.

Programming Custom Buttons (M1/M2):

The M1 and M2 buttons on the back of the controller can be programmed to map up to 16 key inputs, allowing for complex actions with a single press.

Setting M1/M2:

1. Tryk og hold på M1 or M2 knap du ønsker at programmere.
2. While holding M1/M2, press the sequence of buttons you want to map (e.g., A+B+X+Y).
3. Release the M1/M2 button. The sequence is now saved.

Clearing M1/M2:

1. Tryk og hold på M1 or M2 knap for 5 seconds until the controller vibrates. This will clear the programmed sequence for that button.

Billede: Nærbillede view of the back of the controller highlighting the M1 and M2 programmable buttons, with an explanation of how to map up to 16 buttons for "One-Click Ultimate Skill".

Skærmbillede funktion:

Tryk på Skærmbillede knap (square icon) to capture in-game screenshots.

Opvågningsfunktion:

Når Switch-konsollen er i dvaletilstand, skal du trykke på Hjem-knap on the controller to wake up the console and reconnect the controller.

Opretholdelse

Rensning:

Wipe the controller with a soft, dry cloth. Do not use abrasive cleaners or solvents. For stubborn dirt, a slightly damp klud kan bruges, efterfulgt af øjeblikkelig tørring.

Opbevaring:

Opbevar controlleren et køligt og tørt sted, væk fra direkte sollys og ekstreme temperaturer. Undgå at placere tunge genstande oven på controlleren.

Batteripleje:

• Undgå at aflade batteriet helt ofte.
• If storing for an extended period, charge the battery to about 50% every few months to prevent deep discharge.
• Do not expose the battery to high temperatures or attempt to disassemble it.

Fejlfinding

Controlleren opretter ikke forbindelse/parrer ikke:

• Sørg for, at controlleren er opladet.
• Verify the Switch console is updated to the latest system version.
• Try the "plug into dock then disconnect" method described in the Setup section.
• Reset the controller by inserting a thin object into the small reset hole on the back (near M1/M2 buttons).
• Sørg for, at ingen andre trådløse enheder forårsager interferens.

Buttons Not Responding/Lagging:

• Kontroller batteriniveauet.
• Ensure you are within the 33ft wireless range.
• Nulstil controlleren.
• Clean around the buttons if there's visible debris.

Vibration virker ikke:

• Check the vibration level setting (Turbo + D-pad Up).
• Ensure the game supports rumble feedback.
• Nulstil controlleren.

Specifikationer

Garanti og support

VOYEE products are manufactured with high-quality standards. For warranty information and technical support, please refer to the official VOYEE website or contact customer service through your point of purchase.

En digital version af denne brugervejledning kan downloades: VOYEE Switch Controller User Guide (PDF)

Visit the official VOYEE Store for more products and information: VOYEE Store