Xigmatek Aero Black Micro-ATX Case User Manual

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your Xigmatek Aero Black Micro-ATX Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and to maximize the lifespan of your components.

2. Produktet er slutview

The Xigmatek Aero is a compact Micro-ATX PC case designed for efficient component housing and airflow. It features a simple and stylish design, incorporating a tempered glass front panel and an acrylic side panel for visibility of internal components.

Figur 2.1: Foran-venstre view of the Xigmatek Aero Black Micro-ATX Case, showcasing the tempered glass front panel and acrylic side panel.

3. Nøglefunktioner

• Hærdet glas sidepanel: Giver en klar view af interne komponenter.
• Bottom Mounted PSU: Dedicated compartment for power supply unit, aiding in thermal management and cable routing.
• Mesh Design Front Panel: Enhances airflow for improved cooling performance.
• Nem kabelhåndtering: Designed with routing options and a PSU shroud to facilitate neat cable organization.
• Compact Micro-ATX Form Factor: Optimized for smaller builds while maintaining compatibility with standard components.

4. Pakkens indhold

Kontroller venligst, at alle dele er til stede i pakken, før du fortsætter installationen:

• Xigmatek Aero Black Micro-ATX Case
• Accessory Box (containing screws, standoffs, zip ties)
• Brugervejledning (dette dokument)

5. Opsætning og installation

Follow these steps carefully for proper installation of your PC components into the Xigmatek Aero case.

5.1 Forberedelse af sagen

1. Placer etuiet på en flad, stabil overflade.
2. Carefully remove the tempered glass side panel by unscrewing the four thumb screws. Set the panel aside on a soft, non-abrasive surface to prevent scratches.
3. Remove the rear side panel (solid metal panel) by unscrewing the two thumb screws at the back and sliding it off. This provides access for cable management.

Figur 5.1: Side view of the case, showing the tempered glass panel secured by four thumb screws.

5.2 Installation af strømforsyningsenhed (PSU).

1. Locate the PSU mounting area at the bottom rear of the case, within the PSU shroud.
2. Slide your PSU into the designated slot from the rear of the case. Ensure the PSU fan faces downwards (if the case has a bottom vent) or upwards, depending on your cooling preference and PSU design.
3. Fastgør strømforsyningen med skruer fra bagsiden af ​​kabinettet.
4. Route necessary PSU cables through the cutouts in the PSU shroud to the main compartment.

Figur 5.2: Intern view highlighting the PSU shroud and cable routing options.

5.3 Installation af bundkort

1. Install the I/O shield (if applicable) into the rear opening of the case.
2. Align your Micro-ATX motherboard with the pre-installed standoffs. Ensure the screw holes on the motherboard match the standoffs.
3. Fastgør bundkortet med de medfølgende skruer. Spænd ikke for hårdt.

Figur 5.3: Intern view of the case, showing the motherboard tray and standoff locations.

5.4 Installation af lagerdrev

The case supports 3.5-inch HDDs and 2.5-inch SSDs.

• 3.5" harddisk: Locate the drive cage under the PSU shroud. Slide the HDD into the drive bay and secure with screws. Note: Some users find it easier to remove the drive caddy by unscrewing from the underside of the case first.
• 2.5" SSD: SSDs can typically be mounted on dedicated brackets behind the motherboard tray or on top of the PSU shroud. Secure with screws.

5.5 Grafikkort og Udvidelseskort

1. Remove the necessary expansion slot covers from the rear of the case. These are break-off covers, so bend them carefully until they detach.
2. Indsæt dit grafikkort eller andre udvidelseskort i de relevante PCIe-stik på dit bundkort.
3. Fastgør kortene med skruer.

Figur 5.4: Bagside view of the case, showing expansion slots and I/O shield opening.

5.6 Fan and Cooling Installation

The Xigmatek Aero supports multiple fan configurations for optimal airflow.

• Front: Up to 2x 120mm or 140mm fans. Can also support a 240mm AIO liquid cooler.
• Top: Op til 2x 120 mm blæsere.
• Bag: 1x 120 mm blæser.

Install fans by aligning them with the screw holes and securing them with fan screws. Pay attention to airflow direction (intake vs. exhaust).

5.7 Kabelstyring

Brug udskæringerne og fastgørelsespunkterne bag bundkortbakken til at føre og fastgøre kabler. Dette forbedrer luftgennemstrømningen og æstetikken.

Figur 5.5: View from the rear of the motherboard tray, showing space for cable routing.

5.8 Frontpanelforbindelser

Connect the front panel cables (USB 3.0, USB 2.0, Audio, Power LED, HDD LED, Power Switch, Reset Switch) to the corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.

Figur 5.6: Øverst view of the case, illustrating the front I/O ports including USB 3.0 and audio jacks.

5.9 Slutsamling

1. Once all components are installed and cables are managed, reattach the rear side panel.
2. Carefully reattach the tempered glass side panel and secure it with the four thumb screws.

6. Driftsmæssige overvejelser

To ensure optimal performance and longevity of your system:

• Luftstrøm: Ensure proper fan configuration for intake and exhaust to maintain good internal temperatures. The mesh front panel is designed for excellent air intake.
• Placering: Place the PC case on a hard, flat surface to allow adequate airflow to the bottom-mounted PSU and any bottom intake fans. Avoid placing it on carpet.

7. Vedligeholdelse

Regular maintenance helps preserve your system's performance and extends its lifespan:

• Støvrensning: Periodically clean dust from the case interior and fan filters. The top panel features a magnetic dust filter for easy removal and cleaning.
• Udvendig rengøring: Brug en blød, damp cloth to clean the exterior surfaces. Avoid abrasive cleaners. For the tempered glass and acrylic panels, use a microfiber cloth and a gentle glass cleaner.

8. Fejlfinding

Hvis du støder på problemer under eller efter montering, skal du overveje følgende:

• Systemet tænder ikke:
  • Ensure all PSU cables are securely connected to the motherboard and components.
  • Kontroller, at frontpanelets strømafbryderkabel er korrekt tilsluttet bundkortets header.
  • Check the PSU switch is in the 'ON' position.
• Ventilatorer der ikke drejer:
  • Confirm fan cables are properly connected to motherboard fan headers or a fan controller.
• Dårlig luftgennemstrømning/høje temperaturer:
  • Check fan orientation (intake/exhaust).
  • Ensure dust filters are clean.
  • Verify no cables are obstructing airflow.

9. Specifikationer

10. Garanti og support

For warranty information and technical support, please refer to the official Xigmatek webwebstedet eller kontakt din lokale forhandler. Gem din købsbevis til garantikrav.