Indledning
This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your SereneLife Smart Automatic Robotic Vacuum Cleaner, Model PUCRC25PLUS.8. Please read this manual thoroughly before using the appliance and retain it for future reference.
Figure 1: SereneLife Smart Automatic Robotic Vacuum Cleaner, top view. This image displays the sleek, circular design of the vacuum with its central power button and 'Pure Clean' branding.
Opsætning
1. Udpakning og komponenttjek
Fjern forsigtigt alle komponenter fra emballagen. Kontroller, at alle nedenstående dele er til stede og ubeskadigede.
Figure 2: What's in the Box. This image shows the robotic vacuum, dry mop, HEPA filter, two sets of side brushes, and the power adapter.
- Smart robotvakuum
- Genopladeligt batteri (forinstalleret eller separat)
- Strømadapter (US-stik)
- 2 moppeklude
- 1 Mop Plate
- 2 Pairs Side Brushes
- 2 Primary Filters
2. Første opladning
Before first use, fully charge the robotic vacuum. Connect the power adapter to the charging port on the vacuum and plug it into a wall outlet. The charging indicator light will provide status. Average charge time is 2.5-3 hours.
Figure 3: Charging and Run-time. This image highlights the 90-minute run-time and 2.5-3 hour fast charging capability of the device.
3. Montering af sidebørste
Turn the vacuum upside down. Align the side brushes with the designated posts on the underside of the unit and press firmly until they click into place. Ensure both brushes are securely attached.
Figure 4: Dual Rotating Brushes. This image shows the underside of the vacuum with its two side brushes designed for edge cleaning.
Betjeningsvejledning
1. Start og stop af rengøring
To start the cleaning cycle, press the power button located on the top of the vacuum. The vacuum will begin its self-programmed cleaning path. To pause or stop the cleaning cycle, press the power button again.
Figure 5: Multi-Surface Cleaning. The robotic vacuum is shown operating on various floor materials including carpet, hardwood, and tile.
2. Navigation og undgåelse af forhindringer
The vacuum utilizes smart, self-programmed cleaning path navigation. It is equipped with front bumper sensors to detect and clean around household objects and furniture. Anti-fall stair sensors prevent the unit from falling down stairs or off ledges.
Figure 6: Smart Front Bumper Sensors. The vacuum is depicted navigating around furniture, demonstrating its obstacle avoidance capabilities.
Figure 7: Anti-Fall Stair Sensor. The vacuum is shown approaching a staircase, with an illustration of its sensors detecting the drop-off.
Opretholdelse
1. Emptying the Dust Collection Bin
The vacuum features a convenient dust collection bin. To empty, open the bin cover, remove the bin, and dispose of collected debris. It is recommended to empty the bin after each cleaning cycle to maintain optimal performance.
2. Rengøring af filtre
Regularly clean the primary filters to ensure efficient suction and prevent clogging. Remove the filters from the dust bin and gently tap them to dislodge dust. For thorough cleaning, rinse with water and allow to air dry completely before reinserting.
3. Rengøring af sidebørster
Inspect the side brushes for tangled hair or debris. Carefully remove any obstructions to ensure the brushes rotate freely. Replace worn or damaged brushes with new ones from the provided spare set.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Støvsugeren tænder ikke. | Batteriet er ikke opladet eller ikke korrekt tilsluttet. | Ensure the battery is fully charged (2.5-3 hours). Verify the battery is securely connected inside the unit. |
| Vacuum gets stuck frequently. | Obstacles (cables, small rugs) or uneven surfaces. | Clear the cleaning area of loose cables and small, lightweight rugs. The vacuum is designed for hardwood, linoleum, tile, and low/hard carpet floors. |
| Dårlig sugeevne. | Full dust bin or clogged filters/brushes. | Empty the dust bin. Clean or replace the primary filters. Remove any tangled hair or debris from the side brushes. |
Specifikationer
- Konstruktionsmateriale: ABS, POM
- Skraldespandskapacitet: 0.2L
- Gennemsnitlig opladningstid: 2.5-3 timer
- Køretid for vakuumdrift: 90 minutter
- Batteritype: 11.1V Li-ion, 1500mAh - 16.65Wh
- Unit Average Power: 15W
- Strømforsyning: 120/240V, 13V strømadapter
- Lav støj: 65 dB
- Strømkabellængde: 5.02 fod.
- Dimensioner (L x B x H): 11.02'' x 11.02'' x 2.95'' tommer
Figure 8: Powerful 15W Motor. This image illustrates the internal mechanism and the types of debris the vacuum is designed to collect, emphasizing its 15W motor.
Garantioplysninger
This product is covered by a manufacturer's warranty. Please refer to the warranty card included in your packaging for specific terms, conditions, and registration details. Keep your proof of purchase for warranty claims.
Kundesupport
For technical assistance, product inquiries, or service requests, please contact SereneLife customer support. Contact details can typically be found on the product packaging, the official SereneLife webwebstedet eller garantikortet.
