Metabo BS 18 LTX BL I 18V børsteløs akku-boremaskine brugermanual

Indledning

This manual provides essential instructions for the safe and effective operation, maintenance, and troubleshooting of your Metabo BS 18 LTX BL I 18V Brushless Cordless Drill Driver. Please read these instructions carefully before using the tool and keep them for future reference.

Generelle sikkerhedsinstruktioner

ADVARSEL: Læs alle sikkerhedsadvarsler, instruktioner, illustrationer og specifikationer, der følger med dette elværktøj. Undladelse af at følge alle instruktionerne nedenfor kan resultere i elektrisk stød, brand og/eller alvorlig personskade.

• Brug altid passende personlige værnemidler, herunder øjenbeskyttelse, høreværn og handsker.
• Sørg for, at arbejdsområdet er godt oplyst og fri for forhindringer.
• Hold børn og omkringstående væk, mens du betjener et elværktøj.
• Brug ikke elværktøj i eksplosive atmosfærer, såsom i nærheden af ​​brændbare væsker, gasser eller støv.
• Frakobl batteripakken fra værktøjet, før du foretager justeringer, skifter tilbehør eller opbevarer værktøjet.
• Brug kun batteripakker og opladere, der er angivet af producenten.
• Vedligehold elværktøj. Kontroller for forskydning eller binding af bevægelige dele, brud på dele og enhver anden tilstand, der kan påvirke elværktøjets funktion.

Produkt overview

Familiarize yourself with the components of your Metabo BS 18 LTX BL I drill driver.

Figur 1: Metabo BS 18 LTX BL I Cordless Drill Driver. This image displays the complete drill driver unit, including the main body, chuck, trigger, and detachable side handle. The tool features a green and black housing with red accents.

Figur 2: Technical drawing illustrating the dimensions of the Metabo BS 18 LTX BL I drill driver. This diagram provides precise measurements for the tool's length, height, and width, including the chuck diameter (43mm Euro collar).

Nøglekomponenter:

• chuck: For securing drill bits and other accessories.
• Momentjusteringsring: To set the desired torque level.
• Gearvælger: For high-speed drilling or high-torque driving.
• Udløserkontakt: Aktiverer værktøjet og styrer hastigheden.
• Frem/tilbage-vælger: Ændrer rotationsretning.
• Battery Pack Interface: For attaching the 18V battery pack.
• LED arbejdslys: Oplyser arbejdsområdet.
• Bæltekrog: For convenient temporary storage.
• Sidehåndtag: Provides additional control for demanding applications.

Opsætning

1. Installation og fjernelse af batteri

1. Sådan installeres: Align the battery pack with the tool's battery interface and slide it in until it clicks securely into place.
2. For at fjerne: Press the battery release button (if present) and slide the battery pack out.

Note: This tool is part of the CAS (Cordless Alliance System) and is compatible with all 18V battery packs and chargers from CAS brands. Ensure the battery is fully charged before use.

Figur 3: Illustration of the Cordless Alliance System (CAS) battery compatibility. This image shows a CAS battery pack at the center, surrounded by numerous power tools from various brands, all compatible with the same 18V battery system.

2. Attaching Accessories (Drill Bits/Driver Bits)

1. Sørg for, at værktøjet er slukket, og at batteripakken er fjernet.
2. Drej spændepatronen mod uret for at åbne kæberne.
3. Sæt borehovedet eller skruetrækkeren helt ind i patronen.
4. Rotate the chuck clockwise to tighten the jaws securely around the accessory. Hand-tighten firmly.

3. Montering af sidehåndtaget

For demanding applications, attach the auxiliary side handle for improved control and safety. Slide the handle onto the Euro collar (43 mm diameter) and tighten it securely in the desired position.

Betjeningsvejledning

1. Selecting Rotation Direction

Use the forward/reverse selector switch located above the trigger to choose the desired rotation direction. Push left for forward (drilling/driving screws in) and right for reverse (removing screws).

2. Adjusting Torque and Speed

• Momentjustering: Rotate the torque adjustment ring to select the appropriate torque setting for your application. Lower settings are for driving small screws or working with soft materials, while higher settings are for larger screws or harder materials. The "Precision Stop" feature provides electronic torque control for accurate work.
• Gearvalg: Use the gear selector switch on top of the tool to choose between two speed ranges. Gear 1 provides higher torque and lower speed, suitable for driving screws. Gear 2 provides lower torque and higher speed, ideal for drilling.

3. Using the Impulse Mode

The selectable "impulse" mode is designed for specific tasks:

• Removing damaged screws.
• Spot-drilling on smooth surfaces to prevent the drill bit from wandering.

Refer to the tool's specific controls for activating the impulse function.

4. Electronic Safety Shutdown (Kickback Control)

The tool features an electronic safety shutdown system to prevent kickback if the drill bit jams unexpectedly. This enhances user safety by stopping the motor instantly.

Figur 4: Visual representation of the Anti-Kickback safety feature. This image shows the drill driver preventing rotational force from being transferred to the user when the bit jams, indicated by red arrows showing the tool stopping instead of twisting.

Figur 5: Indre view of the Metabo drill driver, illustrating the Electronic Safety Clutch mechanism. This cutaway view highlights the internal components responsible for the electronic safety shutdown, ensuring user protection during operation.

5. Integrated LED Work Light

The integrated LED work light illuminates the work area when the trigger is pressed. It also features an afterglow function, remaining lit for a short period after the trigger is released to provide continued visibility.

6. Using the Belt Hook and Bit Case

The tool includes a handy belt hook and bit case, which can be attached to either the right or left side of the tool for convenient access and temporary storage.

Opretholdelse

• Rensning: Regularly clean the ventilation openings of the tool to prevent dust buildup. Use a soft, dry cloth. Do not use water or chemical cleaning agents.
• Inspektion: Periodically inspect the tool for any signs of damage, loose screws, or worn parts. If damage is found, have the tool repaired by a qualified service technician.
• Batteripleje: Store battery packs in a cool, dry place. Do not expose them to extreme temperatures or direct sunlight.
• Opbevaring: When not in use, store the tool and accessories in a secure, dry place, out of reach of children.

Fejlfinding

If you encounter problems not listed here or if solutions do not resolve the issue, contact Metabo customer support or an authorized service center.

Specifikationer

Garanti og support

For information regarding warranty coverage, service, or technical support, please refer to the official Metabo website or contact your authorized Metabo dealer. Keep your purchase receipt as proof of purchase for warranty claims.

You can visit the official Metabo store for more information: Metabo-butik på Amazon