Brugervejledning til ETA Artista Pro Espressomaskine

1. Introduktion

Thank you for choosing the ETA Artista Pro Espresso Machine. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read it thoroughly before first use and keep it for future reference.

1.1. Sikkerhedsinstruktioner

• Sørg altid for, at maskinen er placeret på en stabil, plan og varmebestandig overflade.
• Apparatet, netledningen eller stikket må ikke nedsænkes i vand eller andre væsker.
• Opbevares utilgængeligt for børn.
• Tag stikket ud af stikkontakten før rengøring eller når maskinen ikke er i brug.
• Betjen ikke maskinen med en beskadiget ledning eller stik.
• Brug kun originalt tilbehør og reservedele.
• The machine operates at high temperatures and pressures; exercise caution to avoid burns.

2. Produktet er slutview

The ETA Artista Pro is a professional-grade espresso machine designed for home use, featuring an all-metal construction and advanced functionalities for optimal coffee preparation.

Figur 2.1: Forside view of the ETA Artista Pro Espresso Machine with milk pitcher.

2.1. Nøglefunktioner

• Integreret kaffekværn: Ensures maximum freshness with adjustable grind settings.
• High-Quality Thermoblock Heating System: Provides rapid and consistent heating.
• Powerful 20 Bar Pump: Delivers optimal pressure for rich espresso extraction.
• PID-temperaturstyring: Electronically regulates water temperature with high precision.
• Professional Steam Wand: For creating micro-foam for milk-based beverages.
• Clear Barometer: Monitors pump pressure during extraction.
• Stor aftagelig vandtank: 2700 ml capacity for fewer refills.
• Kopvarmeflade: Stainless steel top surface to pre-heat cups.
• Energisparetilstand: Sleep mode for reduced power consumption.

2.2. Medfølgende tilbehør

• Professional Portafilter (58 mm diameter)
• Single Standard Stainless Steel Filter Basket
• Double Standard Stainless Steel Filter Basket
• Double Overpressure Stainless Steel Filter Basket
• Blind Filter Basket (for backwashing/cleaning)
• Coffee Doser/Scoop
• Measuring Cup with Cleaning Brush
• Rengøringsnål
• Mælkeskummende kande

Figure 2.2: The ETA Artista Pro Espresso Machine shown with its complete set of accessories, including the portafilter, various filter baskets, tamper, cleaning tools, and milk pitcher.

3. Opsætning

3.1. Udpakning og placering

1. Carefully remove all packaging materials and protective films from the machine and accessories.
2. Place the espresso machine on a flat, stable, and dry surface, away from heat sources and direct sunlight. Ensure adequate ventilation around the unit.
3. Clean all removable parts (water tank, portafilter, filter baskets, drip tray) with warm water and mild detergent, then rinse thoroughly.

3.2. Fyldning af vandtanken

1. Remove the transparent water tank located at the rear of the machine.
2. Fyld tanken med frisk, koldt drikkevand op til MAX-niveauindikatoren.
3. If desired, insert a compatible water filter (Brita Maxtra+ or Laica Bi-Flux) into the adapter in the water tank.
4. Place the filled water tank back into its position, ensuring it is securely seated.

Figur 3.1: Øverst view of the machine, illustrating the transparent water tank and the integrated bean hopper.

3.3. First Use / Priming the Machine

1. Sørg for, at vandtanken er fyldt.
2. Sæt netledningen i en jordet stikkontakt.
3. Turn on the machine using the power button. The machine will begin to heat up.
4. Once heated, place a container under the portafilter spout (without coffee).
5. Press the single or double espresso button to run water through the system. This primes the pump and flushes any manufacturing residue. Repeat this process 2-3 times.
6. Run hot water through the steam wand for a few seconds to prime it as well.

4. Operating the Espresso Machine

4.1. Maling af kaffebønner

1. Fill the bean hopper with fresh, roasted coffee beans.
2. Select your desired grind size using the grind adjustment dial. A finer grind is typically used for espresso, while a coarser grind is for overpressure baskets.
3. Insert the portafilter into the grinding cradle. The grinder will activate automatically when the portafilter is pushed against the activation lever.
4. Grind the desired amount of coffee into the filter basket.

Figure 4.1: A hand holding the portafilter under the integrated grinder, ready to receive freshly ground coffee.

4.2. Brygning af espresso

1. Forvarm kopper: Place your espresso cups on the cup warming tray or rinse them with hot water from the hot water function.
2. Klargør portafilter: Efter slibning, tamp the coffee grounds evenly and firmly into the filter basket. Wipe any excess grounds from the rim of the portafilter.
3. Indsæt portafilter: Securely insert the portafilter into the brew group.
4. Vælg brygning: Press the single or double espresso button. The machine will automatically dispense the programmed volume of espresso. You can also manually stop the flow by pressing the button again.
5. Monitortryk: Observe the barometer during extraction. The needle should ideally be in the optimal range for a perfect espresso.

Figure 4.2: Freshly brewed espresso pouring into a small glass cup, showcasing den fyldige creme.

4.3. Dampende mælk

1. Fill the milk frothing pitcher with cold milk (dairy or non-dairy).
2. Turn the steam knob to activate the steam wand. Wait for the steam to reach full pressure.
3. Skyl dampdysen kort ned i drypbakken for at fjerne eventuelt kondensvand.
4. Submerge the tip of the steam wand just below the surface of the milk. Angle the pitcher to create a swirling motion.
5. Steam the milk until it reaches the desired temperature and texture (micro-foam).
6. Turn off the steam knob and immediately wipe the steam wand with a damp klud for at forhindre mælkerester i at tørre ind.
7. Use the water system cooling function if you plan to brew another espresso immediately after steaming.

4.4. Varmtvandsfunktion

To dispense hot water for tea or Americanos, activate the hot water function (refer to your machine's specific button for this feature). Place a cup under the hot water spout and press the button to dispense.

5. Vedligeholdelse

Regular cleaning and maintenance ensure the longevity and optimal performance of your ETA Artista Pro espresso machine.

5.1. Daglig rengøring

• Portafilter og filterkurve: After each use, remove the spent coffee grounds and rinse the portafilter and filter basket under hot water.
• Dampstang: Tør dampdysen af ​​med en tynd advarsel umiddelbart efter dampning af mælk.amp klud. Udluft kort dampen for at fjerne eventuelle interne mælkerester.
• Drypbakke: Tøm og rengør drypbakken regelmæssigt for at forhindre overløb og bakterievækst.
• Bryggeenhed: Wipe the shower screen and gasket of the brew group with a damp cloth to remove coffee residue.

5.2. Ugentlig rengøring

• Tilbageskylning: Insert the blind filter basket into the portafilter. Add a small amount of espresso machine cleaning detergent (if recommended by the manufacturer). Lock the portafilter into the brew group. Run a brew cycle for 10-15 seconds, then stop. Repeat 3-5 times. Remove the portafilter and rinse thoroughly. Repeat the backflushing process with plain water to rinse.
• Rengøring af kværn: The integrated grinder can be easily removed for cleaning. Follow the instructions in the grinder section of your full manual for detailed steps. Use the provided brush to remove coffee grounds.

5.3. Afkalkning

The frequency of descaling depends on your water hardness and usage. It is recommended to descale your machine every 2-3 months or as indicated by the machine (if it has a descaling alert). Use a descaling solution specifically designed for espresso machines and follow the product's instructions carefully. Refer to the full manual for the detailed descaling procedure for your ETA Artista Pro.

6. Fejlfinding

Dette afsnit omhandler almindelige problemer, du kan støde på med din espressomaskine.

7. Specifikationer

8. Garanti og support

For warranty information, please refer to the warranty card included with your product packaging or contact ETA customer support directly. Keep your proof of purchase for any warranty claims.

For technical assistance or further inquiries, please visit the official ETA webwebsted eller kontakt deres kundeserviceafdeling.