Elgato Wave Mic Arm LP brugsanvisning

1. Introduktion

The Elgato Wave Mic Arm LP is a premium low-profile microphone arm designed to enhance your audio setup for podcasting, streaming, gaming, and home office use. Its robust, all-metal construction ensures durability, while its innovative design keeps your workspace clear and your microphone precisely positioned.

Image: The Elgato Wave Mic Arm LP, a low-profile microphone arm, shown with a microphone attached, extending horizontally across a desk.

2. Hvad er der i æsken

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

• Wave Mic Arm LP
• 1/4" til 3/8" adapter
• 1/4" til 5/8" adapter
• Unbrakonøgle
• Hurtig startvejledning

Image: All components included in the box: the Wave Mic Arm LP, various thread adapters, an Allen wrench, and the quick start guide.

3. Nøglefunktioner

• Premium design: All-metal, anti-torsion construction for durability and stability.
• Lav Profile: Designed to sit below the shoulder line, ensuring an unobstructed view af dit arbejdsområde.
• Cable Channels: Integrated magnetic covers provide easy access and keep cables neatly organized.
• Fuldt justerbar: Offers 360-degree horizontal rotation and 90-degree upper vertical rotation for maximum maneuverability.
• Lang rækkevidde: Provides a horizontal reach of 740 mm (29.1 inches) to cover large desks.
• Skrivebord Clamp: Expandable up to 60 mm (2.4 inches) for secure mounting.
• Kompatibilitet: Works with 1/4", 3/8", and 5/8" threads, supporting microphones up to 2 kg (4.4 lbs).

Image: The low-profile design of the mic arm, positioned beneath a monitor, keeping the desk clear.

Image: Diagrams illustrating 360-degree horizontal rotation and 90-degree up/60-degree down vertical rotation.

Billede: Et nærbillede view of the magnetic cable channels, showing a cable routed neatly inside the arm.

Image: An illustration highlighting the horizontal reach, padded clamp, ball head, and maximum load capacity of 4.4 lbs (2 kg).

4. Opsætningsvejledning

1. Vedhæft skrivebordskl.amp: Fastgør skrivebordet clamp til kanten af ​​dit skrivebord. Sørg for, at det er rentamp is tightened firmly to prevent movement. The clamp can expand up to 60 mm (2.4 inches).
2. Insert Mic Arm: Slide the base of the Wave Mic Arm LP into the desk clamp.
3. Attach Microphone: Screw your microphone onto the ball head at the end of the arm. Use the provided 1/4" to 3/8" or 1/4" to 5/8" adapters if your microphone requires a different thread size. The arm supports microphones weighing up to 2 kg (4.4 lbs).
4. Rute kabler: Open the magnetic cable covers along the arm. Lay your microphone cable inside the channels and close the covers to secure and conceal the cable.
5. Juster spænding: Use the included Allen wrench to adjust the tension at the arm joints if needed. This allows you to fine-tune the swing and fall resistance to match your microphone's weight and your preferred movement.

Image: A complete desk setup featuring the Elgato Wave Mic Arm LP with a microphone, positioned below a monitor, demonstrating its low-profile integration.

5. Operating the Mic Arm

The Wave Mic Arm LP is designed for flexible and precise microphone positioning:

• Vandret justering: The arm can rotate 360 degrees at both the base and the elbow, allowing you to swing the microphone across your entire workspace.
• Lodret justering: The elbow joint allows for 90 degrees of upward rotation and 60 degrees of downward rotation, enabling you to adjust the microphone's height and angle relative to your mouth.
• Microphone Angle: The ball head at the end of the arm provides precise control over your microphone's orientation. Loosen the collar, adjust the microphone to the desired angle, and then tighten the collar to secure it.
• Kabelstyring: Utilize the magnetic cable channels to keep your setup tidy. Ensure cables are not pinched or excessively bent when adjusting the arm.

Image: A user operating the Elgato Wave Mic Arm LP, adjusting the microphone position for optimal audio capture during a recording session.

6. Vedligeholdelse

To ensure the longevity and optimal performance of your Elgato Wave Mic Arm LP:

• Rensning: Wipe the arm with a soft, dry cloth to remove dust and fingerprints. Avoid using abrasive cleaners or solvents.
• Joint Tension: Periodically check the tension of the arm joints. If the arm feels too loose or too stiff, use the provided Allen wrench to adjust the screws until the desired resistance is achieved.
• Clamp Sikkerhed: Sørg for, at skrivebordet klamp remains securely fastened to your desk. Re-tighten if any looseness is detected.
• Kabelinspektion: Regularly inspect cables routed through the channels for any signs of wear or damage.

7. Fejlfinding

• Arm Does Not Hold Position:
  - Check the tension screws at each joint. Use the Allen wrench to tighten them until the arm holds its position firmly. Ensure the microphone weight does not exceed the maximum load of 2 kg (4.4 lbs).
• Skrivebord Clamp Slips:
  - Ensure the desk clamp is fully tightened. Verify that the desk surface is clean and free of debris that might reduce grip. The clamp is designed for desks up to 60 mm (2.4 inches) thick.
• Microphone Does Not Fit:
  - Confirm your microphone's thread size. Use the appropriate 1/4" to 3/8" or 1/4" to 5/8" adapter included with the mic arm.
• Cables Are Not Secure in Channels:
  - Ensure the magnetic covers are properly aligned and fully closed over the cable channels. Avoid overfilling the channels with too many or too thick cables.

For further assistance, please refer to the official Elgato support resources.

8. Specifikationer

9. Garanti og support

The Elgato Wave Mic Arm LP is covered by a manufacturer's warranty. For detailed warranty information, product registration, and technical support, please visit the official Elgato webhjemmeside eller kontakt deres kundeservice direkte.

Du kan finde mere information og support på Elgato Store on Amazon.