Indledning
The Oceanic Viper 2 Full Foot Diving and Snorkeling Fins are designed for optimal performance and comfort in various water conditions. These fins are suitable for all diving and snorkeling skill levels, offering enhanced propulsion and efficiency. This manual provides essential information for the proper setup, usage, maintenance, and troubleshooting of your Viper 2 fins.
Nøglefunktioner
- Ideal for all diving and snorkeling skill levels.
- Flexible Power Thrust Channel directs water off the tip of the blade for improved power and efficiency.
- Power Vents reduce stress while accelerating water over the blade.
- Oversized blade produces increased thrust and propulsion.
- Extremely lightweight for increased performance and ease of travel.
Opsætning og forberedelse
Before each use, inspect your fins for any signs of wear, tears, or damage. Ensure the foot pocket is clean and free of debris. The full-foot design requires a snug but comfortable fit to prevent chafing and maximize power transfer. It is recommended to try on the fins with any socks or booties you intend to wear during use to ensure proper sizing.
Figure 1: A pair of black Oceanic Viper 2 Full Foot Diving and Snorkeling Fins. The fins feature a full-foot design and a flexible blade with the 'OCEANIC' logo visible on the blade surface.
Retningslinjer for brug
To use the fins, slide your foot fully into the foot pocket. Ensure your heel is seated correctly and the fin feels secure without being overly tight. When swimming, use a smooth, continuous kicking motion from your hips, allowing the flexible blade to generate thrust. Avoid short, choppy kicks, which are less efficient. For snorkeling, maintain a relaxed pace, and for diving, focus on controlled, powerful strokes for propulsion.
Pleje og vedligeholdelse
- Skylning: After each use, thoroughly rinse your fins with fresh water to remove salt, sand, and chlorine.
- Tørring: Allow the fins to air dry completely in a shaded area, away from direct sunlight. Prolonged exposure to sunlight can degrade the material.
- Opbevaring: Store fins flat or hung by the foot pocket in a cool, dry place. Avoid folding or placing heavy objects on them, which can deform the blades.
- Inspektion: Periodically inspect the fins for any signs of wear, cracks, or damage to the material.
Fejlfinding
If you encounter issues with your Oceanic Viper 2 fins, consider the following:
- Discomfort or Chafing: Ensure the fins are the correct size. If they are too loose, consider wearing neoprene socks or booties. If too tight, they may be undersized.
- Reduced Propulsion: Check for any damage to the blade or foot pocket. Ensure your kicking technique is efficient and smooth.
- Fins Slipping Off: Verify that the foot pocket is clean and dry before donning. Ensure the size is appropriate for your foot.
Tekniske specifikationer
| Attribut | Værdi |
|---|---|
| Mærke | Oceanisk |
| Modelnavn | Viper 2 |
| Varenummer | 14.6507.52 |
| ASIN | B096PV6TZP |
| UPC | 882689161384 |
| Farve | Sort/sort |
| Materiale | Plast |
| Varens vægt | 2.5 pund |
| Emnedimensioner (LxBxH) | 23.4 x 6.9 x 4.6 tommer |
| Foreslåede brugere | unisex-voksen |
| Aldersinterval | Voksen |
| Sport | Svømning |
| Tilpasningstype | Fast |
Garanti og support
Oceanic products are manufactured to high standards and are typically covered by a limited warranty against defects in materials and workmanship. For specific warranty details, registration, or technical support, please refer to the official Oceanic webwebstedet eller kontakt deres kundeserviceafdeling. Behold din købskvittering som købsbevis.
You can find more information and contact details on the official Oceanic webwebsted: www.oceanicworldwide.com
