Indledning
Welcome to the user manual for the Noua Iron V7 Nero PC Gamer ARGB Mid-Tower ATX Case. This manual provides essential information for the setup, operation, and maintenance of your new PC case. Designed for enthusiasts and gamers, the Iron V7 Nero combines professional aesthetics with high-performance features, including a mesh front panel, tempered glass side panel, and extensive cooling support. Please read this manual thoroughly before beginning installation to ensure proper assembly and optimal performance.
Produkt overview og funktioner
The Noua Iron V7 Nero is a versatile mid-tower ATX case engineered to accommodate a wide range of PC components while providing excellent airflow and visual appeal.
Professionelt design
The Iron V7 Nero features a sleek black finish with a mesh front panel for optimal airflow and a hinged tempered glass side panel for easy access and component visibility. It supports E-ATX, ATX, m-ATX, and Mini-ITX motherboards.
Billede: Foran til venstre view of the Noua Iron V7 Nero PC case, showcasing dens netfrontpanel og sidepanel af hærdet glas.
Komponentkompatibilitet
This case is designed to house high-performance components, supporting CPU coolers up to 180mm in height and graphics cards up to 390mm in length. It also offers vertical GPU mounting capability.
Billede: Intern view illustrating compatible motherboard sizes (mini-ATX, m-ATX, ATX, E-ATX), maximum CPU cooler height (180mm), and maximum VGA length (390mm).
Avanceret kølesystem
The Iron V7 Nero comes with one pre-installed 120mm ARGB fan at the rear, controllable via an included remote. It supports up to 11 fans (3x120/140mm front, 3x120/140mm top, 1x120mm rear, 2x120mm bottom, 2x120mm next to motherboard) and extensive liquid cooling radiator support (up to 360mm front/top, 240mm next to motherboard, 120mm rear).
Image: Diagram indicating various fan mounting locations within the case, including front, top, rear, bottom, and next to the motherboard, with supported fan sizes.
Image: Diagram illustrating radiator mounting locations and supported sizes for liquid cooling, including front, top, rear, and next to the motherboard.
Forbindelse og lagerplads
The top I/O panel provides convenient access to 1x USB 3.0, 2x USB 2.0, Audio jacks, Power, Reset, and LED controls. For storage, the case offers 2x 3.5"/2.5" drive bays with brackets and 2x 2.5" dedicated bays.
Billede: Nærbillede view of the top I/O panel, highlighting the USB 3.0, USB 2.0, Audio, Reset, Power, and LED buttons.
Billede: Intern view of the case's rear side, showing the locations for 2.5" SSDs and 3.5" HDDs, along with the power supply compartment.
Specifikationer
| Feature | Detalje |
|---|---|
| Produktnavn | NOUA IRON V7 |
| Modelnummer | CS0619AG-V7K915 |
| Farve | Sort |
| Materiale | SPCC 0.8 mm, Tempered Glass |
| Produktmål (L x B x H) | 448 mm x 233 mm x 493 mm (17.64 x 9.17 x 19.41 tommer) |
| Chassismål (L x B x H) | 429 mm x 233 mm x 476 mm |
| Drive Bays | 2 x 3.5"/2.5" (with bracket), 2 x 2.5" |
| Udvidelsesslots | 7 slots |
| Bundkort support | E-ATX, ATX, m-ATX, Mini-ITX |
| Understøttelse af strømforsyning | Standard ATX (max length 200mm) |
| Forudinstallerede ventilatorer | 1 x 120mm Rainbow Dual Halo RGB (rear) |
| Ventilatorstøtte (maks.) | Top: 3x120/3x140mm | Front: 3x120/2x140mm | Bottom: 2x120mm | Next to MB: 2x120mm | Rear: 1x120mm |
| Radiatorstøtte (maks.) | Top: 120/140/240/280/360mm | Rear: 120mm | Front: 120/140/240/280/360mm | Next to MB: 120/240mm |
| I/O panel | 1x USB 3.0, 2x USB 2.0, Audio, Power, Reset, LED |
| CPU køler Max højde | 180 mm |
| VGA Max Length | 390 mm |
| VGA Vertical Mount | Yes (requires separate riser cable) |
Image: Diagram illustrating the overall dimensions of the Noua Iron V7 Nero case (Length: 448mm, Width: 233mm, Height: 493mm).
Opsætnings- og installationsvejledning
This section provides a general guide for installing components into your Noua Iron V7 Nero case. Always refer to the specific manuals of your individual components (motherboard, PSU, GPU, etc.) for detailed instructions.
- Forberedelse: Unpack the case and ensure all accessories (screws, cable ties, remote for ARGB fan) are present. Place the case on a stable, flat surface.
- Adgang til interiøret: The tempered glass side panel is hinged. Gently open it to access the main compartment. The opposite side panel can be removed by unscrewing the thumbscrews at the rear.
- Installation af strømforsyning: Install your ATX power supply into the dedicated compartment at the bottom rear of the case. Secure it with screws from the rear. Route necessary cables through the cable management cutouts.
- Installation af bundkort: Install the I/O shield into the rear opening. Align your motherboard with the standoffs inside the case. Ensure the correct standoffs are used for your motherboard size (E-ATX, ATX, m-ATX, Mini-ITX). Secure the motherboard with screws.
- Installation af lagerdrev:
- For 3.5" HDDs or 2.5" SSDs: Use the provided brackets in the drive cage.
- For 2.5" SSDs: Mount directly to the dedicated 2.5" bays on the rear of the motherboard tray.
- Installation af grafikkort (GPU): Remove the necessary expansion slot covers at the rear. Insert your graphics card into the PCIe slot on the motherboard and secure it with screws. If installing vertically, a separate riser cable and bracket (not included) will be required.
- Installation af CPU-køler: Install your CPU cooler according to its manufacturer's instructions. Ensure it does not exceed the maximum height of 180mm.
- Installation af ventilator og radiator: Install additional fans or liquid cooling radiators in the supported locations as desired. Ensure proper airflow direction.
- Kabelstyring: Utilize the cable management cutouts and tie-down points behind the motherboard tray to route and secure cables for a clean build and improved airflow.
- Frontpanelforbindelser: Connect the front panel cables (USB 3.0, USB 2.0, Audio, Power SW, Reset SW, HDD LED, Power LED, ARGB) to the corresponding headers on your motherboard. Refer to your motherboard manual for header locations.
- Afsluttende kontrol: Before closing the case, double-check all connections, ensure no cables are obstructing fans, and confirm all components are securely mounted.
Betjeningsvejledning
Når alle komponenter er installeret og tilsluttet, kan du tænde dit system.
- Tænd: Connect your power supply to a wall outlet. Press the "Power" button on the top I/O panel of the case.
- ARGB-blæserstyring: The pre-installed ARGB fan can be controlled via the included remote control. Use the remote to change lighting modes, colors, and brightness. If connected to a compatible motherboard's ARGB header, lighting can also be synchronized via motherboard software.
- USB-porte: Use the USB 3.0 and USB 2.0 ports on the top panel for connecting peripherals and external devices.
- Lydstik: Connect your headphones or microphone to the audio jacks on the top panel.
- Nulstil knap: The "Reset" button can be used to restart your system if it becomes unresponsive.
Opretholdelse
Regelmæssig vedligeholdelse er med til at sikre optimal ydeevne og levetid for dine pc-komponenter.
- Rengøring af støvfilter: The Noua Iron V7 Nero features dust filters on the top (magnetic), bottom, and side metal panel. Regularly remove and clean these filters to prevent dust buildup inside the case, which can impede airflow and component cooling. Use compressed air or a soft brush.
- Indvendig rengøring: Periodically open the side panel and use compressed air to remove dust from fans, heatsinks, and other components. Ensure the system is powered off and unplugged before cleaning.
- Kabelstyring: Sørg for, at kablerne forbliver pænt ført for at opretholde god luftgennemstrømning.
Fejlfinding
Hvis du støder på problemer med din pc, kan du overveje følgende almindelige fejlfindingstrin:
- Systemet tænder ikke:
- Check if the power supply is properly connected to the wall outlet and the power switch on the PSU is in the "ON" position.
- Sørg for, at 24-bens ATX- og 8-bens CPU-strømkablerne er korrekt tilsluttet til bundkortet.
- Verify that the front panel "Power SW" cable is correctly connected to the motherboard header.
- Fans Not Spinning / No RGB Lighting:
- Kontroller blæserens strømforbindelser til bundkortet eller blæserstyringen.
- Ensure ARGB cables are correctly connected to the ARGB header on the motherboard or the included controller.
- If using the remote, ensure it has working batteries and is pointed towards the controller.
- USB-porte virker ikke:
- Verify that the USB 3.0 and USB 2.0 front panel cables are securely connected to the correct headers on your motherboard.
- Ingen skærmoutput:
- Ensure your monitor cable is connected to the graphics card (GPU) output, not the motherboard's integrated graphics output (unless you are using integrated graphics).
- Sæt grafikkortet tilbage i dets PCIe-slot.
- Check the power connections to the graphics card.
Garanti og support
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Noua webwebsted. Gem din købsbevis til garantikrav.
For further assistance, please contact Noua customer support.
