INKBIRDPLUS Temperaturpistol Infrarødt Termometer Brugermanual

Indledning

The INKBIRDPLUS INK-IFT03 is a non-contact infrared thermometer designed for accurate surface temperature measurement across a wide range of applications. This digital laser thermometer gun is suitable for use in cooking, pizza ovens, reptile enclosures, and various industrial or household tasks. It features a backlight LCD, adjustable emissivity, and a wide temperature range for versatile and precise readings.

Figure 1: INKBIRDPLUS INK-IFT03 Infrared Thermometer Gun

Sikkerhedsoplysninger

Læs og forstå alle sikkerhedsadvarsler, inden du bruger enheden, for at forhindre personskade eller beskadigelse.

• This infrared thermometer is designed for measuring surface temperatures only. It is NOT intended for measuring human body temperature.
• The device cannot measure the internal temperature of an object.
• Do not irradiate human eyes directly or indirectly with the infrared laser at any time. The laser is used for targeting purposes only.
• Opbevar enheden utilgængeligt for børn.

Figure 2: Important Safety Warning - Not for Human Use

Produkt overview

Familiarize yourself with the main components of your INKBIRDPLUS infrared thermometer.

Figure 3: Key Components and Controls

• Measurement Trigger: Activates the measurement and laser.
• LCD-skærm: Shows temperature readings, unit, emissivity, and battery status.
• Backlight/Laser Button: Toggles backlight and laser.
• Mode Switch knap: Cycles through different modes.
• Op/Ned-taster: Adjust settings like emissivity.
• Batterirum: Houses the 9V battery.
• IR Sensor & Infrared Lens: Detekterer infrarød stråling til temperaturmåling.

Kom godt i gang

Installation af batteri

The thermometer requires one 9V battery (included). To install or replace the battery:

1. Find batterirummet på enhedens håndtag.
2. Åbn batterirummets dæksel.
3. Connect the 9V battery to the battery clip, ensuring correct polarity.
4. Place the battery inside the compartment and close the cover securely.

Betjeningsvejledning

At tage en måling

To measure the surface temperature of an object:

1. Ret den infrarøde linse mod målobjektet.
2. Pull and hold the measurement trigger. The laser pointer will activate to help you aim.
3. For more accurate readings, hold the trigger for 2-3 seconds.
4. Temperaturaflæsningen vil blive vist på LCD-skærmen.
5. Release the trigger to hold the reading on the display. The device will automatically shut down after 30 seconds of inactivity to conserve battery.

Unit Switching (°C / °F)

You can switch between Celsius (°C) and Fahrenheit (°F) temperature units:

• With the device powered on, press and hold the Backlight/Laser button for at least 3 seconds to toggle between °C and °F.

Figure 4: Selectable Display of °C/°F

Justerbar emissionsevne

Emissivity (ε) is a measure of an object's ability to emit infrared energy. Different materials have different emissivity values. Adjusting the emissivity setting on your thermometer ensures the most accurate temperature measurement for various surfaces. The emissivity range is 0.1 to 1.0.

Sådan justerer du emissiviteten:

1. Press the "MODE" button until "EMS" (Emissivity) appears on the display.
2. Use the Up/Down keys to adjust the emissivity value according to the material being measured.
3. Refer to the emissivity table below for common materials.

Figure 5: Emissivity Adjustment for Accurate Readings

Figure 6: Emissivity Table for Common Materials

Afstand til punktforhold (D:S)

The INK-IFT03 has a Distance to Spot (D:S) ratio of 16:1. This means that at a distance of 16 units, the measurement spot diameter will be 1 unit. For example, if you are 16 inches away from the target, the measurement area will be a 1-inch circle. A higher D:S ratio allows for accurate measurement of smaller areas from a greater distance.

Figure 7: Understanding the 16:1 Distance to Spot Ratio

Yderligere funktioner

• Backlight LCD: The LCD screen features a backlight for easy reading in low-light conditions.
• Datahold funktion: Automatically holds the last measured reading on the display after releasing aftrækkeren.
• Indikator for lavt batteri: An icon on the display will indicate when the battery level is low, signaling it's time for replacement.
• Høj/lav temperatur alarm: The device can be set to alert you if the measured temperature exceeds or falls below a specified range.

Pleje og vedligeholdelse

Proper care will ensure the longevity and accuracy of your thermometer.

• For at rengøre enheden skal du tørre den af ​​med en blød, damp klæde. Brug ikke slibende rengøringsmidler eller nedsænk enheden i vand.
• Keep the infrared lens clean and free from dust or debris, as this can affect measurement accuracy.
• Store the thermometer in a dry place, away from extreme temperatures and direct sunlight.
• Fjern batteriet, hvis enheden ikke skal bruges i længere tid, for at forhindre batterilækage.

Fejlfinding

If you encounter issues with your INKBIRDPLUS thermometer, consider the following common solutions:

• Ingen skærm/enhed tænder ikke: Check if the 9V battery is correctly installed and has sufficient charge. Replace the battery if necessary.
• Upræcise læsninger:
  • Ensure the emissivity setting is appropriate for the material being measured.
  • Verify that the distance to spot ratio is being observed correctly. Move closer or further away from the target as needed.
  • Clean the infrared lens if it appears dirty or obstructed.
  • Ensure there are no obstructions between the thermometer and the target object.
• Laseren virker ikke: Check if the laser function is enabled. If the battery is low, the laser might not function optimally.

If problems persist, contact INKBIRDPLUS customer support for further assistance.

Tekniske specifikationer

Garanti og kundesupport

For warranty information or technical assistance, please refer to the contact details provided with your product packaging or visit the official INKBIRDPLUS webwebsted. Gem din købskvittering som købsbevis i tilfælde af garantikrav.

You can visit the official INKBIRDPLUS store on Amazon for more information: INKBIRDPLUS Amazon Store