Antec NX200 M Micro-ATX Mini-Tower computerkabinet brugsanvisning

1. Produktet er slutview

The Antec NX200 M is a compact Micro-ATX mini-tower computer case designed for efficient component housing and effective cooling. It features a mesh front panel for optimal airflow and a tempered glass side panel to showcase internal components. This manual provides essential information for setting up, operating, and maintaining your computer case.

Figure 1: Antec NX200 M Micro-ATX Mini-Tower Computer Case, showcasing dets slanke sorte design og sidepanelet i hærdet glas.

Nøglefunktioner:

• Bundkort support: Up to Micro-ATX form factor.
• Opbevaringsmuligheder: Supports one 2.5" SSD and two convertible 3.5" HDD / 2.5" SSD bays.
• Graphics Card Clearance: Accommodates graphics cards up to 275 mm in length.
• CPU kølerhøjde: Supports CPU coolers up to 150 mm in height.
• Power Supply Unit (PSU) Support: Compatible with PSUs up to 150 mm in length.
• Pre-installed Fan: Includes one 120mm rear fan for immediate cooling.
• Mesh Front Panel: Designed for enhanced airflow and heat dissipation.

2. Opsætning og installation

Follow these steps to install your components into the Antec NX200 M case.

2.1 Forberedelse af sagen

Before installation, ensure the case is placed on a stable, flat surface. Carefully remove the tempered glass side panel by unscrewing the four thumb screws located at each corner. Set the panel aside in a safe place to prevent damage.

Figur 2: Intern view of the Antec NX200 M case, illustrating the spacious layout for component installation and cable routing.

2.2 Installation af bundkort

1. Install the necessary motherboard standoffs into the motherboard tray according to your Micro-ATX motherboard's screw holes.
2. Placer forsigtigt dit bundkort på afstandsstykkerne, og juster skruehullerne.
3. Fastgør bundkortet med de medfølgende skruer.

2.3 Installation af strømforsyningsenhed (PSU).

1. The PSU mounts at the bottom rear of the case. Slide your PSU into the designated compartment.
2. Secure the PSU to the case using screws from the rear.
3. Route the necessary power cables through the cable management cutouts to the motherboard and other components.

2.4 Installation af lagerdrev

The case supports various storage configurations:

• One dedicated 2.5" SSD bay.
• Two convertible 3.5" HDD / 2.5" SSD bays.

Install your SSDs and HDDs into the appropriate bays and secure them with screws.

2.5 Installation af grafikkort

The NX200 M supports graphics cards up to 275 mm in length.

1. Fjern de nødvendige PCI-E-slotdæksler fra bagsiden af ​​kabinettet.
2. Insert your graphics card into the appropriate PCI-E slot on your motherboard.
3. Fastgør grafikkortet med skruer.

Figure 3: Diagram illustrating maximum component clearances for CPU cooler (150mm), GPU (275mm), and PSU (150mm) within the Antec NX200 M case.

2.6 Installation af kølesystem

Kabinettet tilbyder fleksible kølemuligheder:

• Front: Supports 2 x 120mm or 2 x 140mm fans, or a 240mm radiator.
• Top: Understøtter 2 x 120 mm blæsere.
• Bag: Includes 1 x 120mm fan (pre-installed), also supports a 120mm radiator.

Install additional fans or radiators as desired, ensuring proper airflow direction.

Figure 4: Diagram detailing the fan and radiator mounting options for the Antec NX200 M case, including front, top, and rear placements.

2.7 Kabelstyring

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to organize cables. This improves airflow and maintains a clean aesthetic.

3. Betjening

3.1 Tænd/sluk

Connect your power cable to the PSU and a wall outlet. Press the power button located on the top front panel of the case to turn your system on or off.

3.2 Brug af frontpanelporte

Frontpanelet giver nem adgang til:

• 1 x USB 3.0 port
• 2 x USB 2.0 porte
• Hovedtelefonstik
• Mikrofonstik
• Nulstil knap

Ensure all internal front panel connectors are correctly attached to your motherboard for full functionality.

Figur 5: Top-down view of the Antec NX200 M case, highlighting the accessible front I/O panel with USB ports, audio jacks, and power/reset buttons.

4. Vedligeholdelse

4.1 Rengøring

Rengør regelmæssigt ydersiden af ​​kabinettet med en blød, tør klud.amp cloth. Avoid abrasive cleaners. For internal cleaning, power off and unplug your PC. Use compressed air to remove dust from fans, heatsinks, and internal components. Ensure proper ventilation during cleaning.

4.2 Støvfiltre

The Antec NX200 M features dust filters on the mesh front panel and potentially other intake areas. Periodically remove and clean these filters to maintain optimal airflow and prevent dust buildup inside the case.

5. Fejlfinding

5.1 Ingen strøm

• Kontroller, om strømkablet er korrekt tilsluttet til både strømforsyningen og stikkontakten.
• Sørg for, at strømafbryderen på strømforsyningen er i 'ON'-positionen.
• Verify that the front panel power button connector is correctly attached to the motherboard.

5.2 Overophedningsproblemer

• Ensure all case fans are spinning correctly and are oriented for optimal airflow (intake at front/bottom, exhaust at rear/top).
• Clean any dust buildup from fans and dust filters.
• Kontroller, at CPU-køleren og GPU-blæserne fungerer korrekt.

5.3 Problemer med komponenttilpasning

• Refer to the specifications section for maximum clearances for CPU coolers (150mm) and graphics cards (275mm).
• Ensure your components do not exceed these dimensions.

6. Specifikationer

7. Garanti og support

For warranty information, technical support, or further assistance, please refer to the official Antec webwebstedet eller kontakt deres kundeservice direkte. Gem din købsbevis til garantikrav.