1. Introduktion
This manual provides essential information for the safe and efficient use of your FSP 250-50GUB Flex ATX Power Supply. This power supply delivers a true 250 watts of continuous power and is designed for compact systems, such as mini-ITX applications. It features an 80 PLUS® Bronze certification for energy efficiency and includes comprehensive protection mechanisms to safeguard your system components.
2. Sikkerhedsoplysninger
Always observe the following safety precautions to prevent injury or damage to the power supply and connected components:
- Do not open the power supply unit. Høj voltages are present inside, even when disconnected from power.
- Sørg for, at strømforsyningen er afbrudt fra stikkontakten før installation eller vedligeholdelse.
- Installer strømforsyningen i et godt ventileret område for at forhindre overophedning.
- Use only the cables provided with the power supply or compatible replacements.
- Undgå at udsætte strømforsyningen for fugt eller ekstreme temperaturer.
- This power supply complies with newer IEC 62368 Standards and includes OVP (Over Voltage Protection), UVP (Under Voltage Protection), OPP (Over Power Protection), SCP (Short Circuit Protection), and OTP (Over Temperature Protection) for hardware safety.
3. Produktet er slutview
The FSP 250-50GUB is a Flex ATX power supply designed for reliability and efficiency in small form factor systems. Key features include:
- 250W True Power: Provides stable and continuous power output.
- 80 PLUS Bronze Certified: Ensures high energy efficiency, meeting Energy Star Version 6.1 requirements.
- Stille ventilator: Equipped with a 4x4 cm double ball bearing fan for extended life and reduced noise levels.
- Full Range PFC Active: Active Power Factor Correction for stable power delivery.
- Omfattende beskyttelse: Includes OVP, UVP, OCP, OPP, and SCP for system safety.
Figur 1: Front view of the FSP 250-50GUB Flex ATX Power Supply, showing the power input and ventilation grille.
Figur 2: Bag view of the FSP 250-50GUB Flex ATX Power Supply, illustrating the fan and cable bundle exit point.
4. Specifikationer
| Specifikation | Værdi |
|---|---|
| Produktmål (L x B x H) | 5.91 x 3.15 x 1.57 tommer (150 x 80 x 40 mm) |
| Varens vægt | 1.61 pund |
| Formfaktor | Flex ATX |
| Output Wattage | 250 watt |
| Effektivitetscertificering | 80 Plus Bronze (115V) |
| Afkølingsmetode | Air (1 fan) |
| Connector Type | ATX |
| Kompatible enheder | Personlig computer |
| Beskyttelsesfunktioner | OVP, UVP, OCP, OPP, SCP |
Figur 3: Detailed output table and physical dimensions of the FSP Flex ATX Power Supply.
5. Installation og opsætning
Follow these general steps for installing your Flex ATX power supply:
- Forbered dit system: Sørg for, at din computer er slukket, og at stikket er taget ud af stikkontakten. Åbn computerens kabinet.
- Fjern den gamle strømforsyning (hvis relevant): Disconnect all cables from the old power supply and remove its mounting screws. Carefully take out the old unit.
- Installer ny strømforsyning: Insert the FSP 250-50GUB into the Flex ATX power supply bay of your chassis. Secure it with the appropriate screws. This unit is designed to fit into most Flex ATX chassis available.
- Tilslut kabler: Connect the power supply cables to your motherboard and other components. Refer to your motherboard and component manuals for specific connection points.
- Bundkort: Connect the 24-pin ATX connector and the 4-pin or 4+4-pin CPU connector.
- Periferiudstyr: Connect SATA power connectors to storage drives and Molex connectors to other compatible devices.
- Graphics Cards: If your system requires it, connect the appropriate PCI-E power connectors.
- Sikre kabler: Route and secure cables to ensure proper airflow and prevent interference with other components.
- Luk sag: Once all connections are made and secured, close your computer case.
- Tænd: Plug the AC power cord into the power supply and then into a wall outlet. Turn on your computer.
Figur 4: Illustration of various connector types provided by the FSP Flex ATX Power Supply, including 24-pin ATX, 8-pin CPU, 4+4-pin CPU, PCI-E 2+6, SATA, Molex, and Floppy connectors.
Video 1: This video demonstrates general features and installation concepts for FSP Flex ATX power supplies, including 1U bracket installation, Flex ATX chassis compatibility, efficiency, safety protections, and cable types. While the video specifically references a 'FlexGURU PRO 500W' model, the principles shown are broadly applicable to the FSP 250-50GUB Flex ATX Power Supply.
6. Betjeningsvejledning
The FSP 250-50GUB power supply operates automatically once correctly installed and connected. Ensure the power switch on the back of the unit (if present) is in the 'ON' position before powering on your computer. The power supply will deliver stable power to your components as needed.
7. Vedligeholdelse
Regelmæssig vedligeholdelse er med til at sikre strømforsyningens levetid og optimale ydeevne:
- Fjernelse af støv: Rengør regelmæssigt strømforsyningens ventilator og ventilationsgitre for støv med trykluft. Sørg for, at systemet er slukket og taget ud af stikkontakten, før rengøring.
- Kabelstyring: Ensure cables are neatly routed and do not obstruct airflow within the chassis.
- Miljøforhold: Brug strømforsyningen inden for de anbefalede temperatur- og luftfugtighedsområder.
8. Fejlfinding
Hvis du støder på problemer med din strømforsyning, kan du overveje følgende almindelige fejlfindingstrin:
- Ingen strøm:
- Kontroller, om netledningen er korrekt tilsluttet både strømforsyningen og stikkontakten.
- Verify that the power switch on the power supply is in the 'ON' position.
- Test stikkontakten med en anden enhed for at sikre, at den har strøm.
- Systemustabilitet/Tilfældige nedlukninger:
- Ensure all power connectors (24-pin ATX, CPU, PCI-E, SATA) are firmly seated.
- Check for proper ventilation and ensure the power supply fan is spinning. Overheating can cause instability.
- If possible, test the power supply with a different set of components or in another system to rule out other hardware issues.
- Høj ventilatorstøj:
- Clean any dust buildup from the fan and grilles.
- Ensure the power supply is not overloaded, which can cause the fan to spin faster.
If problems persist after attempting these steps, contact FSP customer support or a qualified technician.
9. Garanti og support
FSP-produkter er fremstillet efter høje kvalitetsstandarder. For garantioplysninger og teknisk support henvises til den officielle FSP-side. webwebstedet eller kontakt din lokale forhandler. Gem din købskvittering som købsbevis i tilfælde af garantikrav.
