IROAD NX7 Dash Cam brugermanual

1. Introduktion

Thank you for choosing the IROAD NX7 Dash Cam. This manual provides detailed instructions for the installation, operation, and maintenance of your new dash camera. The IROAD NX7 is a high-performance 2-channel dash cam featuring Full HD 1080P recording for both front and rear cameras, a 3-inch touch panel display, 24-hour parking surveillance with motion and impact detection, and advanced driving assistance systems (ADAS).

2. Pakkens indhold

Kontroller venligst, at alle følgende varer er inkluderet i din pakke:

• IROAD NX7 Front Dash Cam Unit
• Bagkamera
• Tilslutningskabel til bagkamera
• OBDⅡ Power Cable (for general and hybrid vehicles)
• 16 GB MicroSD-kort
• Brugervejledning (dette dokument)
• Selvklæbende monteringer

3. Produktet er slutview

Familiarize yourself with the components and ports of your IROAD NX7 Dash Cam.

Figur 3.1: The IROAD NX7 main dash cam unit and its accompanying rear camera, showcasinderes kompakte design.

Figur 3.2: IROAD NX7 Front and Rear Dash Cam with labeled components. The image shows the front camera with its lens, security LED, and operation LED. The rear camera is also shown. Various ports are labeled: DC-IN power terminal, GPS terminal, rear camera terminal, memory card slot, power switch, and bracket.

Figur 3.3: En top-down view of the IROAD NX7 dash cam and its rear camera, highlighting their sleek design.

• Kameraobjektiv: Optager video footage.
• Sikkerheds-LED: Indicates security recording status.
• Drifts-LED: Indicates device operation status.
• Beslag: Used for mounting the dash cam.
• DC-IN Power Terminal: Tilsluttes strømkablet.
• GPS Terminal: For connecting an external GPS module (if applicable).
• Hukommelseskortslot: Insert the MicroSD card here.
• Afbryderen: Tænder/slukker enheden.
• Front Terminal: Connection point for the front camera (if separate).
• Rear Camera Terminal: Tilslutter bakkameraet.

4. Opsætning og installation

4.1 Klargøring af MicroSD-kortet

1. Before first use, it is recommended to format the included 16GB MicroSD card using the IROAD PC Viewer software or directly on the device via the touch screen menu.
2. Insert the MicroSD card into the memory card slot until it clicks into place. Ensure the card is inserted correctly to avoid damage.

4.2 Montering af dashcam'et

The IROAD NX7 uses an adhesive mounting method for secure attachment.

1. Vælg en optimal placering på din forrude, typisk bag bagendenview spejlet, og sørg for, at det ikke blokerer for din view.
2. Clean the chosen area on the windshield thoroughly to ensure strong adhesion.
3. Attach the adhesive mount to the dash cam bracket.
4. Peel off the protective film from the adhesive pad and firmly press the dash cam with the mount onto the cleaned windshield area for at least 30 seconds.
5. Repeat the process for the rear camera, mounting it on the rear windshield.

4.3 Tilslutning af strøm

The IROAD NX7 comes with an OBDⅡ power cable for easy and reliable power supply.

1. Locate your vehicle's OBDⅡ port (usually under the dashboard on the driver's side).
2. Connect the OBDⅡ power cable to the OBDⅡ port.
3. Connect the other end of the OBDⅡ power cable to the DC-IN Power Terminal on the IROAD NX7 front dash cam.
4. Route the power cable neatly along the vehicle's interior trim to avoid interference with driving.
5. Connect the rear camera to the front unit using the provided rear camera connection cable.

5. Betjeningsvejledning

5.1 Tænd/sluk

• The dash cam will automatically power on and begin recording when your vehicle's ignition is turned on, provided it is connected via the OBDⅡ power cable.
• To manually power off, press and hold the Power Switch until the device shuts down.

5.2 Basic Recording Modes

The IROAD NX7 supports continuous recording, event recording, and parking surveillance recording.

• Kontinuerlig optagelse: Starter automatisk, når køretøjet tændes.tage is recorded in 1-minute segments and saved to the MicroSD card.
• Event Recording (Impact Recording): In case of a sudden impact or collision, the G-sensor triggers an event recording, saving the footage separately to prevent overwriting.
• Loop Recording (Overwrite Recording): When the MicroSD card is full, the oldest continuous recording files are automatically overwritten to make space for new recordings. Event recordings are protected from overwriting.

5.3 Parkeringsovervågningstilstand

The IROAD NX7 offers 24-hour parking surveillance with advanced features:

• Bevægelsesdetektion: The dash cam detects motion around the vehicle and automatically records footage.
• Påvirkningsregistrering: If an impact is detected while parked, the device records and saves the event footage.
• Time-lapse & Hyperlapse: For extended parking surveillance, the dash cam can record in time-lapse mode, compressing long periods into shorter videos, saving storage space.
• Battery Over-discharge Prevention: The dash cam monitors your vehicle's battery voltage and automatically cuts off power if the voltage drops below a set threshold, preventing battery drain.

5.4 Betjening af berøringspanelet

The 3-inch touch panel allows for easy navigation and settings adjustment.

• Tap icons to access menus such as Live View, Playback, Settings, and File Ledelse.
• Swipe to navigate through recorded files.
• Adjust settings like recording resolution, G-sensor sensitivity, parking mode options, and time/date.

5.5 Avancerede køreassistentsystemer (ADAS)

The IROAD NX7 includes ADAS features to enhance driving safety:

• LDWS (Lane Departure Warning System): Advarer dig, hvis dit køretøj kommer ud af sin vognbane.
• FCWS (Forward Collision Warning System): Warns you of an impending collision with a vehicle ahead.
• FVDW (Advarsel om afkørsel foran køretøj): Notifies you when the vehicle in front starts moving from a standstill.

Note: ADAS features are supplementary and should not replace safe driving practices.

5.6 LED Signal Light Compatibility

The IROAD NX7 is designed to record clearly even when facing LED traffic signals, minimizing flicker and ensuring reliable footage.

6. Vedligeholdelse

6.1 Administration af microSD-kort

• Regularly format the MicroSD card (at least once a month) to maintain optimal recording performance and prevent data corruption. This can be done via the dash cam's settings or the IROAD PC Vieweh.
• Use only high-quality, genuine MicroSD cards recommended by IROAD.
• Replace the MicroSD card every 6-12 months, depending on usage, as flash memory has a limited lifespan.

6.2 Rengøring af enheden

• Wipe the camera lenses and the device body with a soft, dry, lint-free cloth.
• Brug ikke kemiske rengøringsmidler eller slibende materialer, da de kan beskadige enheden.
• Sørg for, at enheden er slukket, inden rengøring.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

For warranty information and technical support, please refer to the warranty card included with your product or visit the official IROAD webwebsted. Behold din købskvittering som købsbevis i tilfælde af garantikrav.

For further assistance, you may contact IROAD customer service through their official channels.