1. Introduktion og overview
This manual provides essential information for the safe and efficient operation of your HKS 5.5KW (7.5HP 220V) Variable Frequency Drive (VFD). This VFD is designed for precise motor speed control in various applications, including CNC routers and spindle motors. It features advanced PMW control technology for low noise and electromagnetic interference, along with robust protection mechanisms to ensure a long service life.
The HKS VFD supports both single-phase and three-phase 220V input, providing a three-phase 0-400Hz output. It has an input current of 25A and an output current of 36A.
2. Sikkerhedsoplysninger
OPMÆRKSOMHED:
- Please select a VFD model with a power rating greater than 15% of the load. If you intend to control a motor, ensure it is a 3-phase asynchronous motor before purchasing.
- To protect the VFD, always press the red "Stop" button and turn off the power when you finish using it. Be aware that when the VFD is operating, the internal heat sink may reach approximately 176°F (80°C), please pay attention to the protection measures!
- No switch should be installed directly between the VFD and the load. For switch functionality, refer to the specific wiring diagram section in this manual.
- Always use the Δ (Delta) wiring method for the load terminals.
- Refer to the provided diagrams for proper 220V single-phase power connection methods.
3. Produktfunktioner
- Intuitive Display and Buttons: The VFD features a user-friendly display and control buttons for quick setup and operation. The control panel is detachable for remote control applications.
- Various Protection Mechanisms: Includes overload protection, fuse protection, overvoltage protection (DC voltage > 400V), undervoltage protection (DC voltage < 200V), restart protection, stall protection, short circuit protection, and overheat protection.
- Good Noise Control: Achieves low noise and electromagnetic interference through excellent PMW control technology and optimized component compatibility design.
- Effektiv køling: Designet med ample space for cooling between components and multiple ventilation holes in the casing, contributing to a longer service life.
4. Specifikationer
| Specifikation | Værdi |
|---|---|
| Modelnavn | VFD 5.5KW 7.5HP |
| Magt | 5.5KW (7.5HK) |
| Input bindtage | AC 220V (180-250V) |
| Udgang Voltage | 220V |
| Indgangsstrøm | 25A |
| Udgangsstrøm | 36A |
| Indgangsfrekvens | 40-60 HZ |
| Udgangsfrekvens | 0-400 HZ |
| Input fase | Single-phase or Three-phase |
| Udgangsfase | Tre-faset |
| Produktdimensioner | 10 x 7 x 6 tommer |
| Varens vægt | 6.29 pund |
| Fabrikant | H.K.S. |
| Anbefalede anvendelser | CNC router, Spindle motor, Industrial machinery |
Figure 1: HKS VFD with key dimensions for installation planning.
5. Opsætning og installation
5.1. Strømtilslutning
Before connecting power, ensure the VFD is powered off and disconnected from any power source. Remove the terminal cover to access the wiring terminals.
Video 1: Demonstration of how to connect power to the VFD (0:56 - 1:33).
This video illustrates the process of connecting the power supply to the VFD's terminals. It shows the removal of the terminal cover, the connection of wires to the R, S, and T terminals for three-phase power, and emphasizes ensuring a 220V (±15%) voltage difference for single-phase connections.
Wiring Tip: Connect the 3-phase power to the R, S, T terminals. If using single-phase power, connect to R and T terminals separately to ensure a voltage difference of approximately 220V (±15%) between the two lines.
Figure 2: Simplified power connection diagram for the VFD.
5.2. Grundlæggende forbindelsesdiagram
The following diagram illustrates the internal and external wiring connections for the VFD, including control signals and motor connections.
Figure 3: Comprehensive basic connection diagram for the HKS VFD.
5.3. Kontrolpanel overview
The VFD features an intuitive control panel for easy operation and parameter adjustments. The panel can also be detached for remote control.
Figure 4: Detachable control panel for the HKS VFD.
Figure 5: HKS VFD Control Panel with button and indicator descriptions.
6. Betjeningsvejledning
6.1. VFD Initialization Parameter Setting Guide
Follow these steps to initialize and set basic parameters for your VFD. This guide is primarily for 50Hz parameters and three-phase asynchronous motors. For other loads or complex needs, consult the manual chapters 5 to 7 or contact customer service.
Video 2: VFD Initialization Parameter Setting Guide (1:34 - 2:54).
This video demonstrates the step-by-step process of setting initial parameters on the VFD's control panel, including parameter management, initial start-up frequency, source of runtime frequency, source of runtime command, maximum runtime frequency, and motor rating frequency.
- Sæt pn32 (Parameter management) = 6 (initialization for 50Hz parameters).
- Sæt pn02 (Initial start up frequency by panel or other external signal) = Load rating frequency.
- Sæt pn03 (Source of runtime frequency) = 2 (Panel button).
- Sæt pn04 (Source of runtime command) = 1 (Panel button control).
- Sæt pn10 (Maximum runtime frequency) = Load rating frequency.
- Sæt pn12 (Motor rating frequency).
6.2. Jog Function
The Jog function allows for momentary operation of the motor. Use the JOG buttons on the control panel.
Video 3: Jog Function Demonstration (2:55 - 3:13).
This video demonstrates how to use the JOG function. Pressing the FWD button illuminates the green FWD light, indicating forward rotation. Pressing the REV button illuminates the red REV light, indicating reverse rotation.
6.3. VFD Use Parameter Setting Guide Flowchart
Figure 6: Flowchart for VFD Parameter Setting.
7. Vedligeholdelse
Regular maintenance ensures the longevity and optimal performance of your HKS VFD. Perform the following checks periodically:
- Rensning: Keep the VFD unit clean and free from dust and debris. Use a soft, dry cloth for external cleaning. Ensure ventilation openings are clear.
- Tilslutningsinspektion: Periodically check all wiring connections (power input, motor output, control signals) for tightness and signs of wear or corrosion. Loose connections can lead to overheating or malfunction.
- Miljøforhold: Ensure the VFD operates within its specified environmental conditions (temperature, humidity, vibration). Avoid exposing the unit to excessive moisture or corrosive substances.
- Ventilatortjek: Verify that the cooling fan is operating correctly and is not obstructed. A malfunctioning fan can lead to overheating.
8. Fejlfinding
This section provides guidance for common issues you might encounter with your HKS VFD. For more complex problems, refer to the detailed manual or contact customer support.
Almindelige problemer og løsninger:
- Ingen strøm/skærm slukket:
- Check input power supply and circuit breaker.
- Kontroller, at alle strømforbindelser er sikre.
- Motoren kører ikke:
- Ensure the VFD is in RUN mode.
- Check motor wiring (Delta connection recommended).
- Verify parameter settings (e.g., pn02, pn03, pn04, pn10, pn12) are correct for your motor and application.
- Tjek for eventuelle fejlkoder på displayet.
- Overcurrent (OC) Error:
- This can occur if the motor load is too high or during rapid acceleration/deceleration.
- Ensure the VFD's power rating is sufficient for your motor (at least 15% higher than load).
- Adjust acceleration/deceleration times (pn08, pn09) to be longer.
- Check for motor short circuits or ground faults.
- Overvoltage (OV) Error:
- Often occurs during rapid deceleration.
- Increase deceleration time (pn09).
- Consider adding an external braking resistor if the issue persists and rapid deceleration is required.
- Overheat (OH) Error:
- Check for proper ventilation around the VFD. Ensure cooling fan is working.
- Clean any dust or obstructions from the heat sink and fan.
- Reducer den omgivende temperatur, hvis det er muligt.
9. Garanti og support
For any questions or technical assistance beyond the scope of this manual, please contact HKS customer service. Our professional engineers are available to help resolve any issues you may encounter as quickly as possible.
Please note that the demonstration in this manual is primarily for three-phase asynchronous motors. If you are connecting other types of loads, specific parameter settings (pn parameters) may need to be adjusted according to your application's requirements. Detailed information can be found in chapters 5 to 7 of the full manual (if available).
