1. Introduktion
Thank you for choosing the TOTAL TMLI2001 Li-ion Multi-tool. This versatile tool is designed for a variety of tasks including cutting, sanding, and scraping, making it an essential addition to your toolkit. This manual provides important information on the safe operation, maintenance, and troubleshooting of your multi-tool. Please read it thoroughly before first use and keep it for future reference.
The TMLI2001 operates on a 20V battery (not included) and offers a variable speed range of 5000 to 20000 revolutions per minute (rpm).
2. Sikkerhedsinstruktioner
Overhold altid følgende sikkerhedsforanstaltninger for at mindske risikoen for elektrisk stød, brand og alvorlig personskade.
- Læs alle instruktioner: Gør dig bekendt med betjeningselementerne og den korrekte brug af værktøjet.
- Sikkerhed på arbejdsområdet: Hold dit arbejdsområde rent og godt oplyst. Rodede eller mørke områder inviterer til ulykker.
- Elektrisk sikkerhed: Udsæt ikke elværktøj for regn eller våde forhold. Undgå kropskontakt med jordforbundne overflader.
- Personlig sikkerhed: Always wear appropriate personal protective equipment (PPE) such as safety glasses, hearing protection, and gloves. Dress properly; avoid loose clothing or jewelry.
- Brug og pleje af værktøj: Tving ikke elværktøjet. Brug det korrekte elværktøj til din opgave. Frakobl batteriet fra elværktøjet, før du foretager justeringer, skifter tilbehør eller opbevarer elværktøjet.
- Brug og pleje af batteriværktøj: Genoplad kun med den oplader, der er angivet af producenten. Brug kun elværktøj med specifikt beregnede batteripakker.
- Service: Få dit elværktøj efterset af en kvalificeret reparatør, der kun bruger identiske reservedele.
3. Pakkens indhold
Upon unpacking, ensure all items listed below are present and undamaged. If any items are missing or damaged, contact your retailer immediately.
- TOTAL TMLI2001 Li-ion Multi-tool body
- Flexible scraper
- Cutting saw blade
- Segment savklinge
- Hex-nøgle
- Slibefod
- 3 pieces of sanding paper
- Bemærk: Batteri og oplader er ikke inkluderet og skal købes separat.
Figure 3.1: The TOTAL TMLI2001 multi-tool shown with its included accessories: a flexible scraper, cutting saw blade, segment saw blade, hex key, sanding base, and three pieces of sanding paper.
4. Opsætning
4.1 Batteriinstallation
The TMLI2001 multi-tool requires a 20V Li-ion battery (not supplied). Ensure the battery is fully charged before use.
- Align the battery pack with the battery port on the base of the multi-tool handle.
- Skub batteripakken ind i porten, indtil den klikker sikkert på plads.
- For at fjerne batteriet skal du trykke på udløserknappen (hvis den er monteret) og skubbe batteriet ud.
Figur 4.1: Side view of the multi-tool, indicating the battery compartment where a 20V Li-ion battery is inserted.
4.2 Montering af tilbehør
The multi-tool features a quick-change system for various accessories. Always ensure the tool is switched off and the battery is removed before changing accessories.
- Locate the accessory mounting head at the front of the tool.
- Depending on the accessory (saw blade, scraper, sanding base), align it with the mounting pins or slot on the tool head.
- Secure the accessory using the provided hex key or quick-release lever, ensuring it is firmly seated and does not wobble.
- For sanding paper, attach it to the sanding base using the hook-and-loop fastening system.
5. Operating the Multi-Tool
5.1 Powering On/Off and Speed Adjustment
- To turn the tool ON, slide the power switch to the 'ON' position.
- To turn the tool OFF, slide the power switch to the 'OFF' position.
- The tool features variable speed control, allowing adjustment from 5000 to 20000 rpm. Use the speed adjustment dial/lever to select the appropriate speed for your task. Lower speeds are suitable for delicate work or softer materials, while higher speeds are for faster material removal.
5.2 Brugstips
- Skæring: Use the appropriate saw blade (cutting or segment) for the material. Apply steady, even pressure. Allow the blade to do the work; do not force it.
- slibning: Attach the sanding base with the desired grit sanding paper. Move the tool in a consistent pattern over the surface. Start with coarser grit for material removal and finish with finer grit for a smooth finish.
- Skrabning: Use the flexible scraper for removing old paint, adhesive, or caulk. Hold the tool at a shallow angle to the surface.
- Sørg altid for, at emnet er sikkert fastgjortampeller holdes for at forhindre bevægelse under drift.
Figure 5.1: The multi-tool in action, demonstrating its sanding capability on a wooden surface.
6. Vedligeholdelse
Regular maintenance ensures the longevity and optimal performance of your TOTAL TMLI2001 multi-tool.
- Rensning: Efter hver brug skal batteriet frakobles og værktøjet rengøres med en blød klud.amp cloth. Remove any dust, debris, or residue from the ventilation openings and accessory mounting area. Do not use harsh chemicals or abrasive cleaners.
- Tilbehørsinspektion: Regularly inspect all accessories (blades, sanding pads) for wear, damage, or dullness. Replace worn accessories promptly to maintain cutting/sanding efficiency and safety.
- Opbevaring: Store the multi-tool and its accessories in a clean, dry place, out of reach of children. If storing for extended periods, remove the battery pack.
- Batteripleje: Store batteries in a cool, dry place. Do not store fully discharged batteries. Recharge them periodically if not in use for a long time.
7. Fejlfinding
This section addresses common issues you might encounter with your multi-tool.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Værktøjet starter ikke | Batteriet er ikke isat korrekt eller afladet. | Sørg for, at batteriet er sat helt i. Genoplad eller udskift batteriet. |
| Reduced performance / Slow operation | Dull or incorrect accessory. Overloading the tool. Low battery. | Replace accessory. Reduce pressure. Recharge battery. |
| Overdreven vibration eller støj | Accessory not properly secured. Damaged accessory. | Check and re-secure accessory. Replace damaged accessory. |
| Værktøjet overophedes | Vedvarende kraftig brug. Tilstoppede ventilationsåbninger. | Allow tool to cool down. Clear ventilation slots. |
If the problem persists after attempting these solutions, please contact TOTAL customer support or an authorized service center.
8. Tekniske specifikationer
| Feature | Specifikation |
|---|---|
| Modelnummer | TMLI2001 |
| Mærke | TOTAL |
| Strømkilde | Battery Powered (20V Li-ion, battery not included) |
| Hastighed uden belastning | 5000 - 20000 omdr./min. |
| Vægt | 1.5 Kg (tool body only) |
| Produktdimensioner | 10 x 20 x 37 cm |
| Inkluderede komponenter | Flexible scraper, cutting saw blade, segment saw blade, hex key, sanding base, 3 pcs sanding paper |
9. Garanti og support
TOTAL products are manufactured to high-quality standards and are guaranteed against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official TOTAL webwebsted.
For technical support, service, or to inquire about replacement parts and accessories, please contact TOTAL customer service. Keep your purchase receipt as proof of purchase for warranty claims.
Figure 9.1: TOTAL Official Brand Logo.
