Total TS2081006 800W Jig Saw User Manual

1. Introduktion

Thank you for choosing the Total TS2081006 800W Jig Saw. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new power tool. Please read this manual thoroughly before using the jig saw and keep it for future reference. Proper use and care will ensure optimal performance and extend the lifespan of your tool.

2. Generelle sikkerhedsinstruktioner

Følg altid grundlæggende sikkerhedsforanstaltninger for at reducere risikoen for brand, elektrisk stød og personskade.

• Sikkerhed på arbejdsområdet: Hold dit arbejdsområde rent og godt oplyst. Rodede eller mørke områder indbyder til ulykker. Brug ikke elværktøj i eksplosive atmosfærer, f.eks. i nærheden af ​​brandfarlige væsker, gasser eller støv.
• Elektrisk sikkerhed: Elværktøjsstik skal passe til stikkontakten. Modificer aldrig stikket på nogen måde. Undgå kropskontakt med jordforbundne overflader. Udsæt ikke elværktøj for regn eller våde forhold.
• Personlig sikkerhed: Always wear eye protection. Use hearing protection when operating noisy tools. Dress properly; avoid loose clothing or jewelry. Secure long hair. Stay alert and use common sense.
• Brug og pleje af værktøj: Tving ikke elværktøjet. Brug det korrekte elværktøj til din anvendelse. Tag stikket ud af strømkilden, før du foretager justeringer, skifter tilbehør eller opbevarer elværktøj.
• Jig Saw Specific Safety:
  • Hold værktøjet i de isolerede gribeflader, når du udfører en operation, hvor skæretilbehøret kan komme i kontakt med skjulte ledninger eller sin egen ledning.
  • Fastgør emnet. Brug clampeller en skruestik til at holde emnet.
  • Ensure the blade is correctly installed and secured before operation.
  • Keep hands clear of the cutting area.

3. Produktet er slutview og komponenter

Familiarize yourself with the parts of your Total TS2081006 Jig Saw before operation.

Figur 3.1: Total TS2081006 800W Jig Saw with a pack of blades. The tool features a teal and white body, an ergonomic handle, and a visible blade guard.

Figur 3.2: Side view of the Total TS2081006 800W Jig Saw, highlighting the motor housing and handle design. The power cord extends from the rear of the handle.

Nøglekomponenter:

• Håndtag: Ergonomisk designet for komfortabelt greb og kontrol.
• Udløserkontakt: Aktiverer motoren.
• Låse-knap: Til kontinuerlig drift.
• Klinge Clamp: Secures the jig saw blade.
• Bundplade (sko): Understøtter værktøjet på emnet og kan justeres til skråsnit.
• Støvport: For connecting a dust extraction system (if applicable).
• Orbital funktionsvælger: Adjusts the blade's orbital movement for different cutting speeds and materials (if applicable).

4. Opsætning

4.1 Bladinstallation

1. Sørg for, at strømmen er afbrudt: Always unplug the jig saw from the power source before installing or changing blades.
2. Åbent blad Clamp: Find bladkl.amp mechanism (usually a lever or screw) and open it.
3. Indsæt blad: Insert the shank of the appropriate jig saw blade into the blade clamp opening, ensuring the teeth face forward. Push the blade in until it seats firmly.
4. Sikker klinge: Luk bladet clamp mechanism securely. Gently pull on the blade to ensure it is locked in place.

4.2 Base Plate Adjustment (Bevel Cuts)

1. Sørg for, at strømmen er afbrudt: Tag stikket ud af værktøjet.
2. Løsn bundpladens skruer: Locate the screws or lever that secure the base plate. Loosen them sufficiently to allow the base plate to pivot.
3. Juster vinkel: Tilt the base plate to the desired bevel angle (e.g., 15°, 30°, 45°). Most jig saws have detents for common angles.
4. Spænd skruer: Securely tighten the base plate screws or lever to lock the angle in position.

5. Betjeningsvejledning

5.1 Før start

• Sørg for, at arbejdsemnet er sikkert klampudg.
• Select the appropriate blade for the material and cut type.
• Adjust the base plate for straight or bevel cuts as needed.
• Sæt værktøjet i en passende stikkontakt.

5.2 Lav et snit

1. Placer værktøjet: Placer forkanten af ​​bundpladen fladt på emnet, og sørg for, at klingen er fri af materialet.
2. Start klipningen: Depress the trigger switch to start the motor. Allow the blade to reach full speed before engaging the material.
3. Guide the Tool: Slowly guide the jig saw along your marked cutting line. Apply steady, even pressure. Do not force the tool; let the blade do the work.
4. Færdiggør snittet: Once the cut is complete, release the trigger switch and wait for the blade to stop completely before lifting the tool from the workpiece.

5.3 Plunge Cuts (Internal Cuts)

For internal cuts without a pilot hole, a plunge cut can be performed. This technique requires caution.

1. Tilt Tool: Tilt the jig saw forward so the front edge of the base plate rests on the workpiece, with the blade clear of the surface.
2. Startmotor: Start the motor and allow the blade to reach full speed.
3. Slowly Lower: Slowly lower the rear of the base plate until the blade begins to cut into the material.
4. Level Tool: Once the blade has fully penetrated the material, level the tool and proceed with the cut as usual.

6. Vedligeholdelse

Regular maintenance ensures the longevity and safe operation of your jig saw. Always disconnect the tool from the power source before performing any maintenance.

• Rensning: Regularly clean the ventilation openings to prevent motor overheating. Use a soft brush or compressed air to remove dust and debris from the tool. Do not use water or chemical cleaners.
• Udskiftning af knive: Replace dull or damaged blades promptly. Refer to section 4.1 for blade installation.
• Ledningsinspektion: Kontrollér jævnligt strømkablet for skader. Hvis det er beskadiget, skal det repareres af en kvalificeret servicetekniker.
• Opbevaring: Store the jig saw in a dry, secure location out of reach of children.

7. Fejlfinding

Dette afsnit omhandler almindelige problemer, du kan støde på. Kontakt kundesupport, hvis du har problemer, der ikke er nævnt her.

8. Specifikationer

Technical data for the Total TS2081006 800W Jig Saw.

• Model: TS2081006
• Magt: 800 watt
• Voltage: AC (Standard mains voltage, typically 220-240V in Egypt)
• Varens vægt: 1 kilo
• Produktdimensioner: 10 x 20 x 37 cm
• Farve: Teal / Grey
• Håndtag Materiale: Termoplastiske elastomerer eller gummi
• Særlige funktioner: Ergonomisk design
• Bladmateriale: Hurtigstål (til medfølgende klinger)
• Overfladeanbefaling: Aluminum (suitable for various materials with correct blade)

9. Garanti og support

Total products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your purchase or contact your retailer.

For technical support, service, or to order replacement parts, please contact the authorized Total service center or your point of purchase. Ensure you have your model number (TS2081006) and purchase details available.