Total Tools 320W Finishing Sander
Model: TF1301826
Brugervejledning
1. Introduktion
Thank you for choosing the Total Tools 320W Finishing Sander, Model TF1301826. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new finishing sander. Please read this manual thoroughly before first use and keep it for future reference.
This corded electric finishing sander is designed for sanding wood, plastic, metal, filler, and painted surfaces. It is suitable for dry sanding only.
2. Sikkerhedsinstruktioner
Overhold altid grundlæggende sikkerhedsforanstaltninger for at reducere risikoen for brand, elektrisk stød og personskade.
Generelle sikkerhedsadvarsler for elværktøj
- Sikkerhed på arbejdsområdet: Hold arbejdsområdet rent og godt oplyst. Rodede eller mørke områder indbyder til ulykker. Brug ikke elværktøj i eksplosive atmosfærer, f.eks. i nærheden af brandfarlige væsker, gasser eller støv.
- Elektrisk sikkerhed: Elværktøjsstik skal passe til stikkontakten. Modificer aldrig stikket på nogen måde. Udsæt ikke elværktøj for regn eller våde forhold.
- Personlig sikkerhed: Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. Always wear appropriate personal protective equipment, including safety glasses, dust mask, and hearing protection.
- Brug og pleje af værktøj: Tving ikke elværktøjet. Brug det korrekte elværktøj til din anvendelse. Tag stikket ud af strømkilden, før du foretager justeringer, skifter tilbehør eller opbevarer elværktøj.
- Service: Få dit elværktøj efterset af en kvalificeret reparatør, der kun bruger identiske reservedele. Dette vil sikre, at elværktøjets sikkerhed opretholdes.
3. Komponenter overview
Familiarize yourself with the parts of your Total Tools Finishing Sander.
Figur 1: Overview of the Total Tools 320W Finishing Sander. This image displays the sander from a slightly elevated front-right angle, highlighting its teal and grey body, the sanding base, and the power cord connection point.
- Strømafbryder
- Støvopsamlingsport
- Sanding Base/Pad
- Papir Clamps (for sandpaper attachment)
- Ergonomisk håndtag
- Strømledning
4. Opsætning
Fastgøring af sandpapir
- Sørg for, at slibemaskinen er frakoblet strømkilden.
- Slip papiret clamps on both ends of the sanding base.
- Insert one end of the sandpaper under the front clamp og sikre det.
- Pull the sandpaper taut over the sanding base and secure the other end under the rear clamp. Ensure the sandpaper is flat and wrinkle-free.
- Select the appropriate grit sandpaper for your task. Coarser grits (e.g., 80) are for material removal, finer grits for finishing.
Tilslutning til strøm
Connect the power cord to a suitable 220V-240V~50/60Hz power outlet. Ensure the outlet is grounded.
5. Betjening
Starting the Sander
- Hold slibemaskinen godt fast med begge hænder.
- Place the sanding base flat on the workpiece.
- Press the power switch to turn the sander ON.
Sanding Technique
- Apply light, even pressure. Let the sander do the work. Excessive pressure can reduce efficiency and damage the motor.
- Move the sander in long, overlapping strokes, following the grain of the wood when applicable.
- Avoid tilting the sander, as this can create uneven surfaces.
- For optimal dust collection, ensure the dust collection port is clear and, if applicable, connected to a dust bag or vacuum system.
Stopping the Sander
Lift the sander from the workpiece and then release the power switch to turn it OFF.
6. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer din slibemaskines levetid og optimale ydeevne.
Rensning
- Tag altid stikket ud af stikkontakten før rengøring.
- Clean the tool's ventilation openings regularly to prevent overheating.
- Tør ydersiden af med en blød, damp klæde. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
- Empty the dust collection bag/canister frequently.
Opbevaring
Opbevar slibemaskinen et tørt og sikkert sted, utilgængeligt for børn. Beskyt den mod direkte sollys og ekstreme temperaturer.
7. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Sander starter ikke | No power supply; Faulty power switch; Damaged cord | Check power outlet and cord connection; Contact qualified service personnel. |
| Overdreven vibration/støj | Loose sandpaper; Damaged sanding pad; Internal issue | Re-attach sandpaper securely; Inspect sanding pad for damage; Seek professional service. |
| Dårlig slibeydelse | Worn sandpaper; Incorrect grit; Excessive pressure | Replace sandpaper; Use appropriate grit; Reduce pressure. |
8. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | TF1301826 |
| Type | Efterbehandlingssliber |
| Strømkilde | Elektrisk med ledning |
| Indgangseffekt | 320W |
| Voltage | 220V-240V~50/60Hz |
| Hastighed uden belastning | 14000 rpm |
| Bottom Base Size | 180 mm x 90 mm |
| Grundmateriale | Aluminium |
| Varens vægt | 2.05 kilo |
| Produktdimensioner | 10 x 20 x 37 cm |
9. Garanti og support
For warranty information, technical support, or service inquiries, please contact your local Total Tools authorized service center or the retailer from whom you purchased the product. Keep your purchase receipt as proof of purchase.
You may also visit the official Total Tools webhjemmeside for mere information og kontaktoplysninger: www.totaltools.com
