RAINPOINT Sprinkler Timer (Model 101P4) Brugsanvisning

1. Introduktion

The RAINPOINT Sprinkler Timer 101P4 is designed to simplify your garden watering, ensuring your lawn, plants, and vegetables receive optimal hydration without constant manual intervention. This programmable hose timer offers advanced features for efficient water management.

Nøglefunktioner omfatter:

• Simple design with easy-to-use dial and buttons.
• Up to 3 individual watering programs per day.
• Flexible watering frequencies: 7-day cycle or specific day mode.
• Automatic and manual watering options.
• Large 2.5-inch LCD display for clear visibility.
• Low battery indicator and safe shutoff feature.

2. Opsætning

2.1. Batteriinstallation

The timer is powered by two (2) AA 1.5V alkaline batteries (not included). To install:

1. Find batterirummet på bagsiden af ​​timeren.
2. Skub batteridækslet åbent.
3. Isæt to AA-batterier, og sørg for at polariteten (+/-) vender korrekt.
4. Close the battery cover securely to maintain the watertight seal.

2.2. Tilslutning til vandhane

The timer is designed to fit standard 3/4-inch hoses and faucets.

1. Ensure the rubber washer is properly seated in the timer's inlet.
2. Screw the timer onto your outdoor faucet by hand until it is snug. Do not overtighten.
3. Connect your garden hose to the outlet at the bottom of the timer.

2.3. Indstilling af aktuel tid

After installing batteries, the display will activate. Follow these steps to set the current time:

1. Drej drejeknappen til SÆT UR.
2. Brug + button to adjust the hour. Press OK for at bekræfte.
3. Brug + button to adjust the minute. Press OK for at bekræfte.
4. Brug + button to select AM/PM (if in 12-hour mode). Press OK for at bekræfte.
5. Drej drejeknappen til ON to save settings and return to normal operation.

3. Betjeningsvejledning

3.1. Setting Watering Programs (P1, P2, P3)

The timer allows for up to three independent watering programs (P1, P2, P3) per day. Each program can have its own start time and duration.

To set a program:

1. Drej drejeknappen til STARTTID.
2. Brug OK button to select P1, P2, or P3.
3. Brug + button to set the desired start time for the selected program. Press OK for at bekræfte.
4. Drej drejeknappen til HVOR LÆNGE.
5. Brug + button to set the watering duration (from 1 minute to 3 hours 59 minutes). Press OK for at bekræfte.
6. Drej drejeknappen til HVOR OFTE.
7. Brug + button to select the watering frequency (see section 3.2). Press OK for at bekræfte.
8. Repeat for other programs (P2, P3) as needed.
9. Drej drejeknappen til ON to activate the programs.

3.2. Watering Frequency Modes

The timer offers two main watering frequency modes:

• 7 Days Cycle Mode: Allows you to select specific days of the week (e.g., Mon, Wed, Fri) for watering.
• Day Cycle Mode: Allows you to set watering every 2, 3, 4, 5, or 6 days.

3.3. Manuel vanding

You can initiate manual watering without interrupting your preset programs. The default manual watering duration is 10 minutes.

To start manual watering:

1. Sørg for, at drejeknappen er indstillet til ON.
2. Tryk og hold på OK button for 3 seconds. The timer will begin watering for 10 minutes.
3. For at stoppe manuel vanding før tid, tryk på OK knappen igen.

3.4. Instruktionsvideoer

For a visual guide on setting up and operating your RAINPOINT Sprinkler Timer, please refer to the following official videos:

4. Vedligeholdelse

4.1. Udskiftning af batteri

The timer features a low battery indicator on the LCD screen. When the battery icon appears, it is time to replace the batteries. The valve will automatically close when battery power is critically low to prevent water leakage.

Replace batteries as described in section 2.1. Note that replacing batteries may require you to reset the current time.

4.2. Cleaning the Water Inlet Filter

The timer is equipped with a high-quality water inlet filter to prevent debris from entering and clogging the unit. Periodically inspect and clean this filter to ensure optimal performance.

For at rense:

1. Disconnect the timer from the faucet.
2. Carefully remove the filter screen from the inlet.
3. Skyl filteret under rindende vand for at fjerne eventuelt ophobet snavs.
4. Sæt det rene filter i igen, og sæt timeren på vandhanen igen.

5. Fejlfinding

If you encounter issues with your RAINPOINT Sprinkler Timer, consider the following common solutions:

• Timer not turning on/display blank: Check if batteries are installed correctly and have sufficient charge. Replace with new alkaline batteries if necessary.
• Ingen vandgennemstrømning: Ensure the faucet is fully open. Check the water inlet filter for clogs (see section 4.2). Verify that the water pressure is within the operating range (0.5 bar - 8 bar).
• Timer not watering at scheduled times: Double-check your programmed start times, durations, and frequencies (P1, P2, P3). Ensure the dial is set to ON.
• Vandlækage: Ensure all connections (faucet to timer, timer to hose) are tight and that rubber washers are properly seated. Do not overtighten.
• Valve not fully opening/closing: This could indicate low battery power. Replace batteries.

For more detailed troubleshooting or persistent issues, please refer to the official User Manual PDF or contact RAINPOINT customer support.

6. Specifikationer

7. Garanti og support

7.1. Garantioplysninger

The RAINPOINT Sprinkler Timer 101P4 comes with a 2 års garantiGem venligst din købsbevis i tilfælde af garantikrav.

7.2. Kundesupport

RAINPOINT is committed to providing excellent customer service. If you have any questions, require assistance with setup, or need troubleshooting support, please contact us. We aim to provide an answer within 24 hours through various channels:

• E-mail: Se din produktemballage eller den officielle RAINPOINT-forhandler webwebsted for kontakt-e-mail.
• Live chat: Available on the official RAINPOINT webwebsted.
• Local Business: Tjek RAINPOINT website for local service options.

You can also find additional resources and the full User Manual PDF at the following link: RAINPOINT Sprinkler Timer User Guide (PDF)