1. Introduktion
This manual provides essential information for the safe and effective use of your VIBE LED Light Bar. This multicolor LED light bar is designed to enhance indoor environments with customizable lighting effects, controlled conveniently via a remote.
Figure 1: The VIBE LED Light Bar with its remote control and USB power cable.
2. Sikkerhedsoplysninger
Læs og forstå alle sikkerhedsinstruktioner, før du bruger dette produkt. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller alvorlig personskade.
- Kun indendørs brug: Dette produkt er designet til indendørs brug på tørre steder. Må ikke udsættes for vand eller fugt.
- Elektrisk sikkerhed: Sørg for, at strømkilden voltage matches the product's requirements (120V). Do not overload electrical outlets.
- Undgå vand: Dette produkt er ikke water resistant. Do not use near sinks, bathtubs, or in damp miljøer.
- Ventilation: Do not cover the light bar or obstruct its ventilation.
- Børn og kæledyr: Opbevares utilgængeligt for børn og kæledyr.
- Håndtering: Handle with care. While the base provides stability, the light bar can be top-heavy and may tip if not placed securely.
- Rensning: Disconnect from power before cleaning. Use a soft, dry cloth.
3. Pakkens indhold
Bekræft, at alle nedenstående varer er inkluderet i din pakke:
- VIBE LED Light Bar (Model: FB-BLD-BLK)
- Fjernbetjening
- USB strømkabel
- 2 x AAA-batterier (til fjernbetjening)
Figure 2: The VIBE LED Light Bar packaging, indicating included components.
4. Opsætning
- Pakker ud: Fjern forsigtigt alle komponenter fra emballagen.
- Installer fjernbetjeningsbatterier: Open the battery compartment on the back of the remote control. Insert the 2 AAA batteries, ensuring correct polarity (+/-). Close the compartment.
- Tilslut strøm: Insert the small end of the USB power cable into the port on the base of the LED Light Bar. Plug the larger USB end into a compatible USB power adapter (not included) or a powered USB port (e.g., on a computer or wall charger).
- Placering: Place the LED Light Bar on a stable, flat surface. For wall mounting, ensure the surface is suitable and secure. Due to its design, ensure the light bar is placed in a location where it will not be easily knocked over.
5. Betjeningsvejledning
The VIBE LED Light Bar is controlled using the included remote control.
- Tænd/sluk: Tryk på Green Power Button to turn the light bar ON. Press the Red Power Button to turn the light bar OFF.
- Farvevalg: The remote features a variety of colored buttons. Press any colored button to change the light bar to that specific color.
- Justering af lysstyrke: Brug ▲ (up arrow) and ▼ (down arrow) buttons to increase or decrease the brightness of the selected color.
- Dynamiske tilstande: The remote includes several dynamic lighting modes:
- BLITZ: Rapidly cycles through colors.
- GLAT: Smoothly transitions between colors.
- FALME: Gradually fades between colors.
- STROBE: Flashes colors on and off.
- Mode Speed Adjustment: For dynamic modes, use the gear-shaped buttons (⚙) to adjust the speed of the color transitions or flashes.
6. Vedligeholdelse
Proper maintenance ensures the longevity and optimal performance of your LED Light Bar.
- Rensning: Always disconnect the light bar from the power source before cleaning. Use a soft, dry, lint-free cloth to wipe the surface. Do not use abrasive cleaners, solvents, or harsh chemicals.
- Opbevaring: When not in use for extended periods, store the light bar in a cool, dry place, away from direct sunlight and extreme temperatures.
- Udskiftning af batteri: If the remote control's functionality diminishes, replace the 2 AAA batteries.
7. Fejlfinding
If you encounter issues with your VIBE LED Light Bar, refer to the following common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lysbjælken tændes ikke. | Ingen strøm, løs forbindelse, fjernbetjeningens batteri er dødt. | Ensure USB cable is securely connected and plugged into a working power source. Check remote batteries and replace if necessary. |
| Fjernbetjeningen virker ikke. | Dead batteries, remote not aimed at sensor, interference. | Replace remote batteries (2 AAA). Ensure direct line of sight between remote and light bar sensor. Remove any obstructions. |
| Light bar is stuck on one color or flashing. | Incorrect mode selected, remote malfunction. | Press a specific color button on the remote to exit dynamic modes. If the remote is unresponsive, try replacing its batteries. Unplug the light bar for 30 seconds and plug it back in to reset. |
| Light bar is unstable or tips over easily. | Unstable surface, light bar is top-heavy. | Place the light bar on a firm, level, and stable surface. Ensure it is not in a high-traffic area where it could be accidentally bumped. |
8. Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | VIBE |
| Modelnummer | FB-BLD-BLK |
| Produktdimensioner | 3.5 x 2 x 11 tommer |
| Varens vægt | 6.6 ounces (0.41 pund) |
| Lyskildetype | LED |
| Farve | Black (housing), Multicolor (light) |
| Materiale | Plast |
| Finish Type | Poleret |
| Strømkilde | Elektrisk ledning (USB) |
| Voltage | 120 volt |
| Controller type | Fjernbetjening |
| Forbindelsesteknologi | RF (Radio Frequency) |
| Indendørs/Udendørs brug | Indendørs |
| Vandmodstandsniveau | Ikke vandafvisende |
| Batterier påkrævet | 2 AAA-batterier (medfølger til fjernbetjening) |
9. Garanti og support
For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official VIBE webwebsted. Gem din købskvittering for garantikrav.
