Ferm Cordless Electric CDM 1090 COR DRILL Brugermanual

Indledning

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Ferm Cordless Electric CDM 1090 COR DRILL. Please read this manual thoroughly before using the tool to ensure proper handling and to prevent injury or damage.

Sikkerhed først:

• Bær altid passende personlige værnemidler (PPE), såsom sikkerhedsbriller, handsker og høreværn.
• Sørg for, at arbejdsområdet er godt oplyst og fri for forhindringer.
• Hold børn og omkringstående væk, mens du betjener værktøjet.
• Brug ikke værktøjet i eksplosive atmosfærer, såsom i nærheden af ​​brændbare væsker, gasser eller støv.
• Refer to local regulations for proper disposal of batteries and tools.

Produkt overview

The Ferm Cordless Electric CDM 1090 COR DRILL is a versatile rotary tool designed for various drilling and driving tasks. Its cordless design provides portability and convenience.

Figur 1: Ferm Cordless Electric CDM 1090 COR DRILL. This image shows the complete drill with its 18V battery attached. The drill features a blue and black body with orange accents on the trigger and function selector. The keyless chuck is visible at the front, and the torque setting ring is located behind it. The Ferm logo is clearly displayed on the side.

Nøglefunktioner:

• 18 Volt, 1.3 Ah Battery: Provides cordless power for extended use.
• Adjustable Torque Settings: Allows for precise control over fastening applications.
• Special Drill Mode: Dedicated setting for drilling tasks.
• Variable Electronic Speed Control: Enables speed adjustment for different materials and applications.
• Keyless Chuck: Facilitates quick and easy bit changes without a chuck key.

Opsætning

1. Opladning og installation af batteri:

1. Opladning: Before first use, fully charge the 18V battery using the provided charger. Refer to the charger's instruction manual for specific charging procedures and indicators.
2. Installation: Align the battery pack with the base of the drill handle. Slide the battery into place until it clicks securely. Ensure it is firmly seated before operation.
3. Fjernelse: To remove the battery, press the release buttons (usually on the sides of the battery pack) and slide the battery out.

2. Installing Drill Bits or Driver Bits:

1. Åbn chuck: Rotate the front collar of the keyless chuck counter-clockwise until the jaws are open wide enough to accept the bit.
2. Indsæt bit: Insert the desired drill bit or driver bit into the chuck jaws. Ensure the bit is inserted as far as possible to provide maximum grip and stability.
3. Spænd borepatronen: Rotate the front collar of the keyless chuck clockwise until the jaws firmly grip the bit. Hand-tighten securely. Do not overtighten.
4. Verificere: Gently pull on the bit to ensure it is securely fastened and will not slip during operation.

Betjeningsvejledning

1. Tænd/sluk og hastighedskontrol:

• Tænd/sluk-udløser: Squeeze the trigger switch to start the drill. Release the trigger to stop it.
• Variabel hastighed: The drill features variable electronic speed control. The speed increases as you press the trigger further. This allows for precise control, especially when starting a hole or driving screws.

2. Fremad/bagud rotation:

• En kontakt til valg af frem/tilbage er placeret over aftrækkeren.
• Skub kontakten til venstre for fremadrotation (til boring og isætning af skruer).
• Push the switch to the right for reverse rotation (for removing screws or backing out bits).
• When the switch is in the center position, the trigger is locked, preventing accidental startup. Always engage the lock when not in use or when changing bits.

3. Torque Settings and Drill Mode:

• Justerbart drejningsmoment: The torque setting ring, located behind the chuck, allows you to select the desired torque level. Lower numbers are for driving small screws or working with soft materials, while higher numbers are for larger screws or harder materials.
• Boretilstand: For drilling applications, rotate the torque setting ring to the drill symbol. This bypasses the clutch and provides maximum power for drilling.

4. Generelle driftstips:

• Always hold the drill firmly with both hands if possible, especially during high-torque applications.
• Tryk konstant og jævnt. Brug ikke for meget kraft på boremaskinen.
• Ved boring skal du starte med en lav hastighed for at lave et forboringshul, og derefter øge hastigheden efter behov.
• For driving screws, select a torque setting that prevents stripping the screw head or damaging the workpiece.

Opretholdelse

1. Rengøring:

• Regularly clean the ventilation openings of the drill to prevent overheating. Use a soft brush or compressed air.
• Tør værktøjets yderside af med en blød, tør klud.amp klæde. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
• Ensure the chuck jaws are free of debris for optimal bit gripping.

2. Batteripleje:

• Opbevar batterier på et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
• Opbevar ikke batterier i afladet tilstand i længere perioder. Genoplad dem med jævne mellemrum.
• Undgå at tabe eller fysisk beskadige batteripakken.

3. Opbevaring:

• Store the drill and its accessories in a dry, secure location, out of reach of children.
• If storing for an extended period, remove the battery from the drill.
• The product description mentions a "Heavy duty storage case" - utilize this for organized and protected storage.

Fejlfinding

Specifikationer

Garanti og support

Ferm products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Ferm webwebstedet. Behold din købskvittering som købsbevis.

For technical assistance, spare parts, or service, please contact Ferm customer support. Contact details can typically be found on the product packaging, the official website, or your local retailer's information.