Brugermanual

1. Introduktion

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Hanwha Techwin XNO-6120R/LPR 2MP Low Speed LPR Outdoor IR Network Bullet Camera. This camera is designed for specialized applications such as parking lots, drive-thrus, and entry gates, capable of accurately capturing license plates at speeds up to 35 MPH.

Nøglefunktioner omfatter:

• 2 Megapixel (1920 x 1080) Resolution: Provides clear, high-definition video.
• 12X Optical Zoom (5.2 ~ 62.4mm): Allows for detailed magnification of distant objects.
• H.265/H.264/MJPEG Codec Support: Efficient video compression for optimized storage and bandwidth.
• Embedded LPR Solution: Integrated license plate recognition for low-speed applications.
• Avanceret videoanalyse: Includes loitering, directional detection, fog detection, audio detection, digital auto tracking, sound classification, and tampering detektion.
• High Powered IR LEDs: Provides readable length for LPR up to 65 ft in low-light conditions.
• Robust miljøbeskyttelse: IP67/IP66, NEMA 4X, and IK10 ratings ensure durability in harsh outdoor environments.
• Bredt dynamisk område (WDR): 150dB WDR for clear images in challenging lighting.

2. Sikkerhedsoplysninger

Please read all safety instructions carefully before installing and operating the camera. Failure to comply with these instructions may result in injury or damage to the device.

• Strømkilde: Use only the specified power supply (12VDC/24VAC/PoE). Incorrect voltage may damage the camera.
• Installationsmiljø: Ensure the installation location is stable and can support the camera's weight. Avoid installing in areas with excessive vibration or direct exposure to corrosive substances.
• Vand og fugt: Although the camera is IP67/IP66 rated for outdoor use, ensure all connections are properly sealed to prevent water ingress. Do not submerge the camera.
• Service: Forsøg ikke selv at skille kameraet ad eller reparere det. Overlad al service til kvalificeret personale.
• Temperatur: The camera is designed to operate within -40°C ~ +55°C (-40°F ~ +131°F). Ensure the operating environment stays within this range.

3. Pakkens indhold

Bekræft at alle komponenter er til stede i pakken:

• Hanwha Techwin XNO-6120R/LPR Camera Unit
• Backbox (included)
• Installation Guide / Quick Start Guide (not provided in this manual, but typically included)
• Mounting Hardware (screws, anchors - specific types may vary)
• Waterproof RJ45 Connector Kit (if applicable)

Note: The package contents may vary slightly depending on the region or specific bundle.

4. Produktet er slutview

The XNO-6120R/LPR is a bullet-style network camera. Familiarize yourself with its main components:

Figur 4.1: Forvinkel view of the Hanwha Techwin XNO-6120R/LPR bullet camera. This image shows the main lens, the IR illuminators around the lens, and the integrated sun shield. The camera body is dark gray with "WISENET" branding on the side.

Figur 4.2: Side view of the Hanwha Techwin XNO-6120R/LPR bullet camera, illustrating the adjustable mounting bracket and the base plate with screw holes for installation. The camera's cylindrical body extends from the base.

• Linse: 12X optical zoom lens (5.2mm ~ 62.4mm) with auto-focus.
• IR lysdioder: High-powered infrared illuminators for night vision and LPR.
• Bolig: Weatherproof (IP67/IP66) and vandal-resistant (IK10) bullet housing.
• Monteringsbeslag: Adjustable bracket for precise positioning.
• Cable Gland/RJ45 Connection: Located at the rear for network and power connections.
• USB-port: For easy installation and maintenance.
• SD Card Slots: Dual SD card slots for local storage.

5. Opsætning

5.1. Physical Installation and Mounting

1. Vælg en placering: Select a suitable outdoor location that provides the desired field of view for LPR, ensuring it is within range of power and network connections. Consider the camera's operating temperature range.
2. Forberedelse af monteringsoverfladen: Use the included backbox as a template to mark drilling points on the mounting surface. Ensure the surface is strong enough to support the camera.
3. Secure the Backbox: Attach the backbox securely to the mounting surface using appropriate screws and anchors.
4. Attach Camera to Backbox: Connect the camera unit to the backbox, ensuring proper alignment and secure fastening.
5. Juster vinkel: Loosen the adjustment screws on the mounting bracket to set the desired camera angle and field of view. Tighten screws once adjusted.

5.2. Ledninger og forbindelser

The XNO-6120R/LPR supports Power over Ethernet (PoE), 12VDC, or 24VAC power inputs.

1. Netværks forbindelse: Connect an RJ45 Ethernet cable from your network switch (preferably PoE-enabled) to the camera's RJ45 port. Ensure the connection is secure and waterproof using the provided kit if necessary.
   

   Figur 5.2.1: Example of an RJ45 Ethernet cable, used for network and PoE connection to the camera.
2. Strømtilslutning (hvis ikke PoE anvendes): If not using PoE, connect a 12VDC or 24VAC power adapter to the camera's power input terminal. Refer to the camera's wiring diagram for correct polarity.
3. Installation af SD-kort: If local storage is desired, insert compatible SD cards into the dual SD card slots.

5.3. Indledende konfiguration

Efter fysisk installation og tilslutning skal du få adgang til kameraets web grænseflade til den indledende opsætning.

1. Opdag kamera: Use the Hanwha Techwin Device Manager software (available on the Hanwha Techwin website) to discover the camera on your network. The camera will typically obtain an IP address via DHCP.
2. Adgang Web Interface: Åbn a web browseren og indtast kameraets IP-adresse.
3. Login: Enter the default username and password (refer to the quick start guide or Hanwha Techwin documentation for defaults, and change immediately for security).
4. Netværksindstillinger: Configure static IP address, subnet mask, gateway, and DNS settings if required for your network.
5. Dato og tid: Set the correct date, time, and time zone. Configure NTP synchronization for accuracy.
6. Firmwareopdatering: Check for and install the latest firmware version from the Hanwha Techwin website for at sikre optimal ydeevne og sikkerhed.

6. Betjening

6.1. Lev View and Basic Controls

Once configured, you can access the camera's live view gennem dens web interface or a compatible VMS (Video Management System).

• Livestream: View real-time video feed.
• Zoom kontrol: Use the digital zoom controls in the interface to adjust the 12X optical zoom.
• Fokusjustering: The camera features auto-focus. Manual adjustments can be made via the web interface if needed.
• Billedindstillinger: Adjust brightness, contrast, saturation, sharpness, WDR, and day/night mode settings to optimize image quality for specific lighting conditions.

6.2. LPR (License Plate Recognition) Configuration

The XNO-6120R/LPR features an embedded LPR solution. Proper configuration is crucial for accurate plate recognition.

1. Access LPR Settings: Navigate to the LPR/Analytics section in the camera's web interface.
2. Define Detection Zone: Draw a detection zone that covers the area where license plates are expected to appear. Ensure the zone is optimized for the camera's field of view and the expected vehicle speed (up to 35 MPH).
3. Set Recognition Parameters: Configure parameters such as minimum/maximum plate size, angle tolerance, and character set.
4. Begivenhedshandlinger: Define actions to be taken upon plate recognition, such as sending metadata to a VMS, triggering an alarm, or logging data.
5. Test: Conduct thorough testing with various vehicles and lighting conditions to verify LPR accuracy.

6.3. Advanced Video Analytics

The camera supports various intelligent video analytics:

• Loitering Detection: Detects objects remaining in a defined area for too long.
• Retningsbestemt detektion: Triggers an event when an object moves in a specified direction.
• Fog Detection: Improves image clarity in foggy conditions and can trigger alerts.
• Lydgenkendelse: Triggers events based on sound levels or specific sound classifications.
• TampDetektion af ering: Alerts if the camera is obstructed, moved, or spray-painted.

Configure these analytics in the camera's web interface under the "Event" or "Analytics" sections, defining detection zones, sensitivity, and associated actions.

6.4. Optagelse og afspilning

Record video to local SD cards, a Network Video Recorder (NVR), or a compatible VMS.

• Optagelsesplan: Set up continuous recording, event-triggered recording (e.g., by LPR or motion detection), or scheduled recording.
• Lagerkonfiguration: Format SD cards via the web interface. Configure network storage (NAS/NVR) settings.
• Afspilning: Få adgang til optaget footage through the camera's web interface (for SD card recordings) or your NVR/VMS for network recordings. Use date/time filters and event logs to locate specific incidents.

7. Vedligeholdelse

7.1. Rensning

Regular cleaning helps maintain optimal image quality and extends the camera's lifespan.

• Lens and Housing: Gently wipe the lens and camera housing with a soft, clean, lint-free cloth. For stubborn dirt, use a mild, non-abrasive cleaning solution specifically designed for optical lenses.
• Undgå: Do not use strong detergents, solvents, or abrasive materials, as these can damage the lens coating or housing finish.
• Frekvens: Clean as needed, especially in dusty or high-traffic environments.

7.2. Firmwareopdateringer

Kontroller Hanwha Techwin med jævne mellemrum website for new firmware versions. Firmware updates often include bug fixes, performance improvements, and new features.

1. Download firmware: Download den nyeste firmware file for your specific model (XNO-6120R/LPR) from the official Hanwha Techwin support page.
2. Adgang til kamera: Log ind på kameraets web interface.
3. Opdateringsproces: Navigate to the "System" or "Maintenance" section and locate the firmware update option. Follow the on-screen instructions to upload and install the firmware.
4. Afbryd ikke: Do not power off the camera or disconnect the network during the firmware update process, as this can brick the device.

7.3. Miljøhensyn

Ensure the camera's operating environment remains within specified limits to prevent damage and ensure longevity.

• Temperatur: Verify that the ambient temperature stays between -40°C ~ +55°C (-40°F ~ +131°F). The built-in heater assists in cold conditions.
• Fugtighed: Maintain humidity levels within the camera's specified operating range.
• Vibration: Minimize exposure to excessive vibration, which can affect image stability and component lifespan.

8. Fejlfinding

This section addresses common issues you might encounter with the XNO-6120R/LPR camera.

9. Specifikationer

10. Garanti og support

For warranty information, please refer to the official Hanwha Techwin warranty policy available on their webwebstedet eller kontakt din autoriserede forhandler. Gem din købsbevis til garantikrav.

For technical support, product documentation, and software downloads, visit the official Hanwha Techwin support website. You may also contact their customer service or your local distributor for assistance.

Note: Specific warranty terms and support availability may vary by region.