Produkt overview
The PanzerGlass™ Screen Protector for Bosch Intuvia BUI 255 is engineered to safeguard your Bosch Intuvia BUI 255 GPS display from physical damage. Constructed from tempered glass, this protector offers robust defense against impacts and scratches, making it ideal for active use. Its anti-glare surface minimizes reflections, enhancing screen visibility in bright conditions, and its water-resistant properties provide protection against moisture.
Nøglefunktioner:
- Vandtæt: Provides protection against water and moisture.
- Fugtbeskyttelse: Designed to withstand humid conditions.
- Stødbestandig: Absorbs impacts to protect the underlying screen.
- Modstandsdygtig mod ridser: Prevents scratches from daily wear and tear.
- Anti-Reflective Glass: Reduces glare for improved screen readability in bright light.
Opsætning og installation
Proper installation is crucial for optimal performance and protection. Follow these steps carefully to apply your PanzerGlass™ screen protector.
- Rengør skærmen: Thoroughly clean the Bosch Intuvia BUI 255 display using a microfiber cloth to remove all dust, smudges, and fingerprints. Ensure the screen is completely dry before proceeding.
- Juster beskytteren: Carefully peel off the protective film from the adhesive side of the PanzerGlass™ screen protector. Align the protector with the edges of your device's screen.
- Påfør beskytteren: Once aligned, gently lower the protector onto the screen. The adhesive will begin to spread automatically.
- Fjern bobler: Use a soft card or your finger to gently push any air bubbles towards the edges of the screen. Small bubbles typically disappear within 24-48 hours.
Image: The PanzerGlass™ screen protector being positioned over a Bosch Intuvia BUI 255 display for installation. This illustrates the alignment process before full application.
Operating the Screen Protector
Once installed, the PanzerGlass™ screen protector operates seamlessly with your Bosch Intuvia BUI 255 display. It is designed to maintain full touch sensitivity and screen clarity while providing superior protection.
- Berøringsfølsomhed: The ultra-thin design ensures that the touch functionality of your device remains unaffected.
- Anti-Glare Functionality: The anti-glare coating works continuously to reduce reflections from sunlight and other bright light sources, improving screen readability outdoors.
- Beskyttelse: The tempered glass acts as a sacrificial layer, absorbing impacts and scratches to protect the original display of your Bosch Intuvia BUI 255.
Opretholdelse
To ensure the longevity and clarity of your PanzerGlass™ screen protector, follow these simple maintenance guidelines:
- Rensning: Use a soft, lint-free cloth, preferably microfiber, to gently wipe the screen protector. For stubborn smudges, slightly dampRengør kluden med vand eller en skærmsikker rengøringsopløsning. Undgå skrappe kemikalier eller slibende materialer.
- Undgå skarpe genstande: While the protector is scratch-resistant, extreme pressure or contact with very sharp objects can still cause damage.
- Regelmæssig inspektion: Periodically check the screen protector for any signs of damage or lifting. If the protector is significantly damaged, consider replacing it to maintain optimal protection for your device.
Fejlfinding
If you encounter any issues with your PanzerGlass™ screen protector, refer to the following common problems and their solutions:
- Air Bubbles After Installation:
Løsning: Small bubbles often disappear on their own within 24-48 hours as the adhesive fully cures. For larger bubbles, gently lift the nearest edge of the protector and re-apply, pushing the bubble out with a soft card. Ensure the screen is free of dust before re-application.
- Dust Particles Under the Protector:
Løsning: If dust particles are trapped, carefully lift the protector from one corner using a piece of tape. Use another piece of tape to dab and lift the dust particle from both the screen and the adhesive side of the protector. Re-apply the protector slowly.
- Beskyttelsesbeskyttelsen sidder ikke ordentligt fast:
Løsning: Ensure the screen was thoroughly cleaned and dry before installation. If the edges are lifting, gently press them down for a few seconds. If the issue persists, the protector may be damaged or the adhesive compromised, requiring replacement.
- Reduceret berøringsfølsomhed:
Løsning: This is rare with PanzerGlass™ protectors. Ensure the protector is correctly aligned and fully adhered. If the issue persists, check your device settings or consider if the issue is with the device itself rather than the protector.
Specifikationer
| Feature | Detalje |
|---|---|
| Produktdimensioner | 7.68 x 0.71 x 4.25 tommer |
| Varens vægt | 1.41 ounce |
| ASIN | B0916BTTB8 |
| Varemodelnummer | 3612 |
| Særlige funktioner | Anti Glare, Scratch Resistant |
| Fabrikant | PANZERGLASS |
| Dato først tilgængelig | 26. marts 2021 |
| Mærke | Panzerglas |
| Materiale | Hærdet glas |
| Varens hårdhed | 9H |
| Antal enheder | 1 tæller |
| Beskrivelse af skærmoverfladen | Blank |
| Antal genstande | 1 |
Garanti og support
PanzerGlass™ products are designed for durability and performance. For specific warranty information regarding your screen protector, please refer to the packaging or visit the official PanzerGlass™ website. For technical support or further assistance, please contact PanzerGlass™ customer service through their official channels.
Du kan besøge Panzer Glass Store on Amazon for yderligere produktinformation og supportressourcer.
