Vigtige sikkerhedsoplysninger
Please read and understand all instructions before operating this device. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury.
Laser sikkerhed
This product is a Class II laser product. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
- Stir ikke direkte ind i laserstrålen.
- Do not intentionally expose others to the laser beam.
- Brug ikke laservaterpaset i eksplosive atmosfærer, f.eks. i nærheden af brandfarlige væsker, gasser eller støv.
- Always wear appropriate eye protection when operating the laser level.
- Opbevar enheden utilgængeligt for børn.
Produkt overview
The Amazon Basics 360 Degree Rotating Laser Class II Level (Model BLL-001) is designed to project a clear, consistent laser line for various indoor leveling and alignment tasks. It features two backlit bubble vials for precise manual leveling and a 360-degree rotating base for versatile projection angles.
Figur 1: Forside view of the Amazon Basics Laser Level, showing the projected red laser line and the device's yellow and black casing.
Figur 2: Nederst view of the laser level, displaying the product label with model number BLL-001, laser class II warning, and power requirements.
Opsætning
Installation af batteri
- Find batterirummet på enheden.
- Åbn dækslet til rummet.
- Isæt to (2) AA-batterier, og sørg for korrekt polaritet (+/-) som angivet i batterirummet.
- Luk batterirummets dæksel forsvarligt.
Placering
Place the laser level on a stable, flat surface. For optimal accuracy, ensure the surface is as level as possible before fine-tuning with the bubble vials.
Figur 3: Øverst view of the laser level, highlighting the two extra-large backlit bubble vials used for precise leveling.
Operation
Tænd/sluk
To turn the laser level on, slide the power switch to the 'ON' position. The laser beam will activate. To turn it off, slide the switch to the 'OFF' position.
Leveling the Device
The device features two extra-large backlit bubble vials for accurate leveling. Adjust the position of the laser level until both bubbles are centered within their respective vials. This ensures the projected laser line is perfectly horizontal and vertical.
Figur 4: En detaljeret view of the backlit bubble vials, showing the clear liquid and bubble for precise alignment.
Using the 360-Degree Rotating Wall Attachment
The laser level comes with a 360-degree rotating wall attachment. This attachment allows you to project the laser line at any desired angle. Secure the attachment to a wall or suitable surface, then place the laser level onto the attachment. Rotate the laser level on the attachment to adjust the angle of the projected line.
Figure 5: The rotating base of the laser level, featuring degree markings for precise angular adjustments.
Figure 6: An individual utilizing the laser level to ensure a straight line for mounting an object on a wooden wall, demonstrating practical application.
Opretholdelse
- Rensning: Tør enheden af med en blød, damp klæde. Brug ikke slibende rengøringsmidler eller opløsningsmidler.
- Opbevaring: Store the laser level in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if the device will not be used for an extended period.
- Håndtering: Handle the device with care to avoid damage to the laser module or bubble vials.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Laseren tænder ikke. | Batterierne er døde eller forkert installeret. | Udskift batterierne, eller sørg for korrekt polaritet. |
| Laser line is dim or inconsistent. | Low battery power; operating in bright conditions. | Replace batteries. Use in lower light conditions for better visibility. |
| Device does not level properly. | Surface is too uneven; bubble vials not centered. | Place on a more stable surface. Adjust device until bubbles are centered. |
| Laser line is not straight. | Device is not level. | Ensure both bubble vials are perfectly centered. |
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | Grundlæggende om Amazon |
| Modelnummer | BLL-001 |
| Laser klasse | Klasse II |
| Laser rækkevidde | 16 ft / 192 in |
| Strømkilde | 2 x AA batterier (medfølger ikke) |
| Materiale | 70% plastik, 30% metal |
| Farve | Gul/sort |
| Produktmål (LxBxH) | 4 x 4 x 3 tommer (ca.) |
| Varens vægt | 3.52 g (omtrentlig) |
| Driftstilstand | Automatisk |
Figure 7: Dimensional drawing of the laser level and its rotating base, indicating key measurements in inches and centimeters.
Garanti og support
For warranty information, please refer to the official Warranty document provided with your product or available for download from the Amazon product page. A link to the Warranty PDF is provided below:
For product support, troubleshooting assistance, or to inquire about replacement parts, please contact Amazon Basics customer service. Contact details can typically be found on the Amazon webwebstedet eller i din købsdokumentation.
