Indledning
This manual provides comprehensive instructions for the proper installation, operation, and maintenance of your Vortex Optics Precision Extended Cantilever Riflescope Mount (Model CM-530). Designed for 30mm riflescope tubes, this mount ensures optimal eye relief and head placement for enhanced shooting performance. Please read this manual thoroughly before use to ensure safe and effective handling of your equipment.
Opsætning og installation
Proper installation of your riflescope mount is critical for accuracy and reliability. Follow these steps carefully.
Inkluderede komponenter
- Vortex Precision Extended Cantilever Mount (30mm)
- Monteringshardware (skruer)
- T-25 nøgle
Monteringsvejledning
- Forbered skinnen: Ensure the rifle's Picatinny or Weaver rail is clean and free of debris.
- Placer monteringen: Place the cantilever mount onto the rail, ensuring the recoil lugs are fully seated in the rail slots. The extended cantilever design allows for forward positioning to achieve correct eye relief.
Billede: Forside view of the Vortex Precision Extended Cantilever Riflescope Mount.
Fastgør basen: Using the T-25 wrench, tighten the base clamp screws. Apply a torque of 45-50 tommer/lbs. Tighten screws evenly in an alternating pattern to ensure uniform pressure.
Image: A riflescope securely mounted on the Vortex Cantilever Mount, demonstrating proper positioning.
Install the Riflescope: Place your 30mm riflescope into the lower rings of the mount. Ensure the riflescope is level and positioned to achieve optimal eye relief. The cantilever design positions the center of the riflescope tube at a height of 1.574” (40mm) from the base, providing ample clearance.
Billede: Side view of the mount, showing the ring caps removed for scope installation.
Attach Ring Caps: Place the upper ring caps over the riflescope. Insert the ring screws and tighten them evenly in an alternating pattern. Apply a torque of 18 tommer/lbs to the ring screws. Do not overtighten, as this can damage the riflescope tube.
Image: Technical drawing illustrating the dimensions and specifications of the Precision Extended Cantilever Mount (CM-530).
Endelig kontrol: Verify that all screws are tightened to the specified torque settings and that the riflescope is securely mounted and level.
Driftsmæssige overvejelser
Once installed, the Vortex Precision Extended Cantilever Mount provides a stable platform for your riflescope. While the mount itself does not require active operation, consider the following for optimal performance:
- Øjenaflastning: The cantilever design is specifically engineered to provide proper eye relief and head placement on AR-platform rifles and similar firearms. Adjust your riflescope's position within the rings to achieve the clearest sight picture and comfortable eye relief.
- Stabilitet: The robust aluminum construction ensures maximum stability and recoil absorption.
- Kompatibilitet: This mount is designed for 30mm riflescope tubes and Picatinny/Weaver rails. Ensure your equipment is compatible before installation.
Opretholdelse
Regular maintenance will ensure the longevity and performance of your Vortex Precision Extended Cantilever Mount.
- Rensning: Use a soft, clean cloth to wipe down the mount. For stubborn dirt, a small amount of mild soap and water can be used, followed by thorough drying. Avoid harsh chemicals or abrasive materials.
- Skrueinspektion: Periodically check the tightness of all base clamp screws and ring screws. Recoil can sometimes cause screws to loosen over time. Re-torque to the specified settings (Base: 45-50 in/lbs, Rings: 18 in/lbs) if necessary.
- Opbevaring: Store the mount in a clean, dry environment when not in use.
Fejlfinding
If you encounter issues with your mount, consider the following common solutions:
| Spørgsmål | Mulig årsag | Løsning |
|---|---|---|
| Riflescope shifts or loses zero | Loose ring screws or base clamp skruer. | Re-torque ring screws to 18 in/lbs and base clamp screws to 45-50 in/lbs using the T-25 wrench. Ensure screws are tightened evenly. |
| Mount does not sit flush on rail | Debris on rail or recoil lugs not fully seated. | Clean the rail and mount's base. Ensure recoil lugs are properly aligned and seated in the rail slots. |
| Difficulty achieving proper eye relief | Riflescope positioned incorrectly within the rings. | Loosen ring screws slightly, adjust riflescope forward or backward until optimal eye relief is achieved, then re-torque ring screws. |
Specifikationer
| Mærke | Vortex |
| Modelnavn | Precision Extended Cantilever Mount |
| Modelnummer | CM-530 |
| Stil | 30 mm |
| Farve | Sort |
| Materiale | Aluminium |
| Monteringstype | Cantilever montering |
| Varens vægt | 7 ounce |
| Base Clamp Moment | 45-50 tommer/lbs |
| Ring Screw Torque | 18 tommer/lbs |
| Center Height (from base) | 1.574" (40 mm) |
| Inkluderede komponenter | Cantilever-montering, Hardware, T-25-nøgle |
| UPC | 875874008045 |
Garanti og support
Vortex Optics stands behind its products with an industry-leading warranty.
VIP garanti
Your Vortex Precision Extended Cantilever Mount is covered by our unlimited, unconditional, lifetime VIP Warranty. This is a fully transferable promise to repair or replace your item if it becomes damaged or defective. This warranty does not cover loss, theft, deliberate damage, or cosmetic damage that does not hinder performance.
For warranty service or technical support, please refer to the official Vortex Optics webhjemmeside eller kontakt deres kundeservice direkte.
