ICO Bath K402W

ICO Bath K402W Kontour håndklædetørrer med kabel brugermanual

Model: K402W

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your ICO Bath K402W Kontour Hardwired Towel Warmer. Please read all instructions carefully before installation and use to ensure safe and proper functioning of the unit. Retain this manual for future reference.

2. Sikkerhedsoplysninger

ADVARSEL: Electrical installation should only be performed by a qualified electrician in accordance with all local and national electrical codes.

  • Ensure the power supply is disconnected at the circuit breaker before beginning any installation or maintenance.
  • Dette apparat er kun beregnet til indendørs brug.
  • Håndklædetørreren må ikke nedsænkes i vand eller andre væsker.
  • Do not use the towel warmer to dry items other than towels or garments suitable for drying on a heated surface.
  • Keep children away from the towel warmer when it is in operation. The surface can become hot.
  • Ensure proper grounding as per electrical codes.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før installationen påbegyndes:

  • ICO Bath K402W Kontour Towel Warmer Unit
  • Monteringsudstyr (skruer, ankre, monteringsbeslag)
  • Installationsskabelon
  • Brugervejledning (dette dokument)

4. Specifikationer

FeatureSpecifikation
ModelK402W
Dimensioner (H x B x D)40 cm x 18 cm x 4 cm
StrømtypeHardwired
Voltage110 V
Wattage110 watt
MaterialeRustfrit stål
SlutteChrome
Antal barer9
Varens vægt10 pund

5. Opsætning og installation

Professional installation by a qualified electrician is recommended for this hardwired unit.

5.1. Planlægning af installationsstedet

  • Choose a wall location that is structurally sound and can support the weight of the towel warmer and wet towels.
  • Ensure the location is within reach of the intended electrical connection point.
  • Maintain adequate clearance from other fixtures, walls, and flammable materials.

5.2. Mounting the Towel Warmer

  1. Forbered væggen: Use the provided installation template to mark the drilling points for the mounting brackets on the wall. Ensure the template is level.
  2. Bore huller: Bor forboringshuller på de markerede steder. Indsæt vægankre om nødvendigt, afhængigt af vægmaterialet.
  3. Fastgør beslag: Fastgør monteringsbeslagene til væggen med de medfølgende skruer.
  4. Position Towel Warmer: Carefully align the towel warmer with the mounting brackets and secure it in place.
Front view of the ICO Bath K402W Kontour Chrome Hardwired Towel Warmer, showing its nine horizontal bars and sleek vertical rails.

Figur 1: Forside view of the ICO Bath K402W Kontour Chrome Towel Warmer.

5.3. Elektrisk tilslutning (hardwired)

VIGTIG: Turn off power at the main circuit breaker before proceeding with electrical connections.

  1. Adgangsledninger: Locate the electrical junction box or wiring point behind the towel warmer.
  2. Tilslut ledninger: Connect the towel warmer's electrical wires to the household wiring according to local electrical codes. Typically, this involves connecting the live (black) wire, neutral (white) wire, and ground (green or bare copper) wire.
  3. Sikre forbindelser: Ensure all wire connections are secure using appropriate wire nuts or connectors.
  4. Conceal Wiring: Carefully push the wires back into the junction box and secure the cover plate. The design of the K402W allows for concealed screws for a clean aesthetic.
  5. Gendan strøm: Once all connections are secure and the unit is mounted, restore power at the circuit breaker.
Lifestyle image of the ICO Bath K402W Kontour Chrome Towel Warmer installed in a modern bathroom, with a towel draped over it.

Figure 2: ICO Bath K402W Kontour Towel Warmer installed in a bathroom setting.

6. Betjeningsvejledning

The ICO Bath K402W Kontour Towel Warmer features an integrated On/Off switch for simple operation.

  1. Tænd: Locate the On/Off switch on the towel warmer unit. Press the switch to the 'On' position. An indicator light (if present) may illuminate.
  2. Opvarmningstid: Allow approximately 15-30 minutes for the towel warmer to reach its optimal operating temperature.
  3. Place Towels: Drape towels or garments over the bars. Do not overload the unit. Ensure air can circulate around the towels for efficient warming.
  4. Sluk: When not in use, or when towels are sufficiently warmed/dried, press the On/Off switch to the 'Off' position.

7. Vedligeholdelse

Regular cleaning and maintenance will ensure the longevity and optimal performance of your towel warmer.

  • Rensning: Rengør overfladen af ​​håndklædevarmeren med en blød, damp cloth. For stubborn spots, use a mild, non-abrasive cleaner. Avoid harsh chemicals, abrasive pads, or solvents, as these can damage the chrome finish.
  • Do Not Polish: The chrome finish is designed to resist tarnishing. Avoid using metal polishes, which can alter the finish.
  • Inspektion: Periodically inspect the electrical cord and connections for any signs of damage or wear. If damage is observed, discontinue use and contact a qualified electrician or ICO Bath customer support.

8. Fejlfinding

ProblemMulig årsagLøsning
Towel warmer does not heat up.Ingen strømforsyning.
Tænd/sluk-knappen er slukket.
Defekt ledningsføring.
Tjek afbryderen.
Ensure switch is in 'On' position.
Kontakt en kvalificeret elektriker.
Towel warmer is not getting hot enough.Overloaded with too many towels.
Ambient room temperature is too low.
Reduce the number of towels.
Giv mere tid til opvarmning.
Enheden laver usædvanlige lyde.Problem med intern komponent.Disconnect power and contact customer support.

If you encounter issues not listed here, or if the suggested solutions do not resolve the problem, please contact ICO Bath customer support.

9. Garantioplysninger

The ICO Bath K402W Kontour Towel Warmer is covered under ICO Bath's limited warranty for parts. A 2-year commercial warranty is also provided. For specific terms and conditions of your warranty, please refer to the warranty documentation included with your purchase or visit the official ICO Bath webwebsted.

10. Support

For further assistance, technical support, or to inquire about replacement parts, please contact ICO Bath customer service:

  • Webwebsted: www.icobath.com (Tjek venligst den officielle webhjemmeside for de seneste kontaktoplysninger.)
  • Telefon: Refer to the ICO Bath webwebsted for regionale kontaktnumre.

Relaterede dokumenter - K402W

Preview Milano elektrisk håndklædetørrer med fast kabel - ICO Bath Tekniske specifikationer
Detaljerede tekniske specifikationer for ICO Bath Milano elektrisk håndklædetørrer med fast kabel, inklusive funktioner, dimensioner, installation, garanti og vedligeholdelsesoplysninger for modellerne W7033, W7034 og W7035.
Preview Avento elektrisk håndklædetørrer med stikkontakt - Tekniske specifikationer
Detaljerede tekniske specifikationer for Avento Electric Plugin håndklædetørrer fra ICO Bath, inklusive funktioner, modelvariationer, dimensioner, installation, garanti og vedligeholdelse.
Preview Tekniske specifikationer for ICO Sorano elektrisk håndklædetørrer med fast kabel
Tekniske specifikationer for ICO Sorano elektrisk håndklædetørrer med fast kabel, med detaljer om funktioner, dimensioner, installation, tilgængelige finish, modelvarianter, garantioplysninger og plejeinstruktioner.
Preview Avento elektrisk håndklædetørrer med stikkontakt - Tekniske specifikationer | ICO Bath
Detaljerede tekniske specifikationer for ICO Bath Avento elektrisk håndklædetørrer med plugin-funktion, inklusive funktioner, dimensioner, installationsvejledning, garanti og vedligeholdelse. Fås i flere finish og modeller (E3602-E3609).
Preview ICO Bath Sorano elektrisk håndklædevarmer med stikkontakt, tekniske specifikationer
Detaljerede tekniske specifikationer, funktioner, installationsvejledning og garantioplysninger for ICO Bath Sorano elektrisk håndklædetørrer med stikkontakt, der fås i flere finish og modeller (E4202-E4209).
Preview ICO Bath Bennett LED-spejle installationsvejledning
Omfattende installationsvejledning til ICO Bath Bennett LED-spejle, der dækker sikkerhedsforanstaltninger, nødvendige værktøjer, dele, dimensioner, elektriske tilslutninger, monteringsvejledninger og betjeningsfunktioner.