Behringer RD-6 Analog Drum Machine User Manual

1. Introduktion

The Behringer RD-6 is an analog drum machine designed to provide classic drum sounds with modern connectivity. It features eight analog drum voices, a 16-step sequencer, and USB/MIDI integration for seamless studio workflow. This manual provides essential information for setting up, operating, and maintaining your RD-6 unit.

2. Vigtige sikkerhedsinstruktioner

• Læs disse instruktioner grundigt, inden du bruger apparatet.
• Gem disse instruktioner til fremtidig reference.
• Overhold alle advarsler og følg alle instruktioner.
• Brug ikke dette apparat i nærheden af ​​vand.
• Rengør kun med en tør klud.
• Bloker ikke ventilationsåbninger. Installer i overensstemmelse med producentens anvisninger.
• Må ikke installeres i nærheden af ​​varmekilder såsom radiatorer, varmeapparater, komfurer eller andre apparater (inklusive ampløftere), der producerer varme.
• Beskyt netledningen mod at blive trådt på eller klemt, især ved stik, stikkontakter og det sted, hvor de kommer ud af apparatet.
• Brug kun tilbehør/tilbehør specificeret af producenten.
• Træk stikket ud af dette apparat under tordenvejr, eller når det ikke skal bruges i længere perioder.
• Overlad al service til kvalificeret servicepersonale. Service er påkrævet, når apparatet er blevet beskadiget på nogen måde, såsom strømforsyningsledning eller stik er beskadiget, væske er blevet spildt, eller genstande er faldet ind i apparatet, apparatet har været udsat for regn eller fugt, ikke fungerer normalt , eller er blevet droppet.

3. Opsætning

3.1 Udpakning

Carefully unpack your RD-6 unit. Inspect for any signs of damage during transit. Retain the packaging for future transport or storage.

3.2 Strømtilslutning

Tilslut den medfølgende strømadapter til DC INPUT on the rear panel of the RD-6 and then to a suitable power outlet. Ensure the power switch is in the OFF position before connecting.

3.3 Lydforbindelser

The RD-6 offers various audio output options:

• MIX UD: Connect a standard 1/4-inch TS cable from the MIX OUT jack to your mixer or audio interface for the main stereo output.
• VOICE OUT: Individual 1/4-inch TS outputs are available for each drum voice (OH/CH, CP, CY, LT/HT, SD, BD). Use these to process individual drum sounds separately.
• TELEFON: Connect stereo headphones to the 1/4-inch TRS PHONES jack for monitoring.

3.4 MIDI- og USB-forbindelser

The RD-6 supports MIDI and USB for integration with other musical equipment and computers:

• MIDI IN/OUT/THRU: Use standard 5-pin MIDI cables to connect the RD-6 to other MIDI devices. MIDI IN receives clock and note data, MIDI OUT sends internal clock and pattern data, and MIDI THRU passes through incoming MIDI data.
• USB: Connect a USB cable from the RD-6's USB port to your computer for MIDI communication and firmware updates.

3.5 Trigger Outputs

The RD-6 features two TRIGGER UD jacks (1/8-inch TS) that can send trigger pulses to control external modular synthesizers or other compatible equipment.

Figure 1: Rear panel connections of the Behringer RD-6. This image displays the DC input, MIDI IN/OUT/THRU, USB port, MIX OUT, individual VOICE OUTs, and START/STOP jack.

4. Betjening

4.1 Frontpanel overview

The front panel of the RD-6 provides access to all controls for sound generation, sequencing, and performance.

Figure 2: Behringer RD-6 front panel. This image shows the tempo knob, accent control, individual drum voice controls, mode selector, step buttons, and distortion section.

4.2 trommestemmer

The RD-6 features eight distinct analog drum voices:

• Bass Drum (BD): Controls for tone and decay.
• Snare Drum (SD): Controls for tone and snare level.
• Low Tom (LT) / High Tom (HT): Shared controls for tone and decay.
• Cymbal (CY) / Clap (CP): Shared controls for level.
• Open Hat (OH) / Closed Hat (CH): Shared controls for level.

Each voice has a dedicated level knob. The ACCENT knob globally controls the intensity of accented steps.

4.3 Sequencing

The RD-6 features a 16-step sequencer for creating drum patterns.

1. Select Instrument: Tryk på INSTRUMENT button and then one of the 8 instrument buttons (BD, SD, LT/HT, CY/CP, OH/CH) to select the drum voice you wish to program.
2. Vælg tilstand: Drej på MODE drejeknap til WRITE PATTERN.
3. Indtast trin: Tryk på TRIN buttons (1-16) to activate or deactivate the selected instrument on that step. An illuminated LED indicates an active step.
4. Add Accent: While in WRITE PATTERN mode, hold the ACCENT button and press a STEP button to add an accent to that step.
5. Save Pattern: After programming, turn the MODE drejeknap til PLAY PATTERN. The pattern is automatically saved.
6. Start/Stop: Tryk på START/STOP button to begin or end pattern playback.
7. Tempo: Adjust the playback speed using the TEMPO knop.

4.4 Pattern Chaining

You can chain multiple patterns to create longer sequences or full songs. The RD-6 supports chaining up to 250 bars.

4.5 Forvrængning

The RD-6 includes a built-in distortion effect. Use the DISTORTION TIL / FRA switch to activate it. Adjust the TONE og NIVEAU knobs to shape the distortion effect.

5. Vedligeholdelse

5.1 Rengøring

Clean the unit with a soft, dry cloth. Do not use liquid cleaners or solvents. Ensure the unit is powered off and unplugged before cleaning.

5.2 Opbevaring

When not in use for extended periods, store the RD-6 in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to use the original packaging for storage and transport.

6. Fejlfinding

7. Specifikationer

8. Garanti og support

For detaljerede garantioplysninger og teknisk support henvises til den officielle Behringer-brochure. webwebstedet eller kontakt din lokale forhandler. Gem din købsbevis til garantikrav.