Reely Gen4 2.4 GHz 4-kanals pistolgrebsfjernbetjening med modtager brugermanual

Indledning

This manual provides essential instructions for the safe and efficient operation of your Reely Gen4 2.4 GHz 4-Channel Pistol Grip Remote Control and its accompanying receiver. Please read this manual thoroughly before using the product to ensure proper setup and functionality.

The Reely Gen4 remote control system offers a reliable connection with a range of up to 300 meters. It features a 4-channel design, a splash-proof receiver (IPX3), and includes both a beginner and a normal operating mode. An integrated antenna and a low voltage warning system (below 4.2V) enhance user experience and safety.

Figur 1: Reely Gen4 Pistol Grip Remote Control and Receiver. This image displays the main remote control unit with its ergonomic pistol grip design and the compact 4-channel receiver module.

Pakkens indhold

• Reely Gen4 2.4 GHz Pistol Grip Remote Control (Transmitter)
• Reely Gen4 4-Channel Receiver
• Brugervejledning (dette dokument)

Note: Batteries for the remote control are not included and must be purchased separately.

Opsætning

1. Batteriinstallation (sender)

1. Locate the battery compartment cover on the bottom of the remote control handle.
2. Slide the cover open or remove it according to the markings.
3. Insert the required batteries (typically AA batteries, refer to the compartment for exact type and quantity) ensuring correct polarity (+/-).
4. Sæt batterirummets dæksel på igen.

2. Modtagertilslutning og binding

The receiver must be correctly connected to your model's electronic speed controller (ESC) and servos, and then bound to the transmitter.

• Connect Servos/ESC: Connect your model's steering servo to Channel 1 (CH1) on the receiver, and the ESC (throttle) to Channel 2 (CH2). Additional accessories can be connected to Channel 3 (CH3) and Channel 4 (CH4).
• Tænd: Ensure the transmitter is turned off. Connect the receiver to a power source (usually via the ESC's BEC).
• Bindende procedure:
  1. Tryk og hold bindeknappen på modtageren nede.
  2. While holding the bind button, power on the receiver. The receiver's LED should flash rapidly.
  3. Slip bind -knappen.
  4. Turn on the transmitter. The receiver's LED should become solid, indicating a successful bind.
  5. Test the controls to ensure proper functionality before operating your model.

Figur 2: Side view of the Reely Gen4 remote control, highlighting the CH3 switch. This switch controls the third channel, often used for auxiliary functions like lights or gear shifts.

Figur 3: En anden side view of the Reely Gen4 remote control, showing the CH4 button. This button activates the fourth channel, providing additional control options for your RC model.

Betjeningsvejledning

Grundlæggende kontrol

• Rat: Rotate the wheel left or right to control the steering of your model.
• Gashåndtag: Pull the trigger towards you for forward movement (acceleration) and push it away from you for braking or reverse.
• Channel 3 (CH3) Switch: Use this switch for on/off functions or two-position controls, such as lights or a two-speed transmission.
• Channel 4 (CH4) Button: This momentary button can be used for functions requiring a brief activation, like a horn or winch.

Driftstilstande

• Begyndertilstand: This mode limits the maximum speed and steering throw, making it easier for new users to control the model. Consult your model's specific manual for how to activate this mode on the transmitter, as it may involve a combination of button presses or a dedicated switch.
• Normal tilstand: Provides full control over speed and steering, suitable for experienced users.

Lav voltage Advarsel

The transmitter is equipped with a low voltage warning system. If the battery voltage drops below 4.2V, an audible alarm or visual indicator (e.g., flashing LED) will activate. When this warning occurs, immediately cease operation of your model and replace the transmitter batteries to avoid loss of control.

Stænkbeskyttelse

The receiver is designed with IPX3 splash protection, meaning it is protected against spraying water. This allows for operation in light rain or damp conditions. However, it is not waterproof and should not be submerged in water. Always ensure the receiver is properly installed and protected within your model.

Opretholdelse

• Rensning: Use a soft, dry cloth to clean the remote control and receiver. Avoid using solvents or abrasive cleaners.
• Opbevaring: Store the remote control and receiver in a dry, cool place away from direct sunlight and extreme temperatures. Remove batteries from the transmitter if storing for extended periods to prevent leakage.
• Inspektion: Regularly inspect all cables and connectors for signs of wear or damage. Ensure the antenna is intact.

Fejlfinding

Specifikationer

Garantioplysninger

Reely provides a 1-year availability for spare parts for this product. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact Reely customer support.

Kundesupport

For further assistance, technical support, or inquiries regarding your Reely Gen4 remote control, please visit the official Reely website or contact your local dealer. Please have your model number (RE-6802950) ready when contacting support.