Indledning
This manual provides comprehensive instructions for the installation, operation, and maintenance of your MPC Factory Remote Activated Start System. This system is designed to integrate seamlessly with your vehicle's existing factory key fobs, allowing for convenient remote engine starting.
Important Vehicle Requirements
- Køretøjskompatibilitet: This system is compatible with 2012-2016 Chrysler Town & Country models.
- Transmissionstype: Automatic Transmission ONLY.
- Brændstoftype: Gas Engine - Not for Hybrid vehicles.
- Antændelsestype: Designed for Push-to-Start ignition systems. This product does NOT work with traditional key-start cars.
- Geographic Region: Product may not function in vehicles manufactured for sale outside of the U.S. & Canada.
Hvad er inkluderet
Your remote start system package includes the following components:
- Alt-i-et-datainterfacemodul til fjernstarter.
- Vehicle-specific T-Harness for plug-and-play installation.
- Firmware forudinstalleret til dit specifikke køretøj.
- Alle nødvendige komponenter til installation.
Opsætning og installation
This kit features a plug-in T-Harness design, significantly reducing the number of wiring connections typically required for remote start systems. Installation primarily involves plug-in connections. Concise instructions with plug locations are provided to facilitate a seamless installation process. Basic knowledge of car electronics wiring is recommended for successful installation.
Identifying Your Key Type
It is crucial to correctly identify your vehicle's key type to ensure compatibility and proper installation of the remote start system. The video below explains how to differentiate between various Chrysler key types.
Installationsproces overståetview
The installation involves accessing the vehicle's ignition system, typically located behind the lower dash panel. The T-Harness simplifies this process by allowing direct connection to existing plugs.
Detaljerede installationstrin
For a visual guide on the installation process, please refer to the video below. While the video may feature a slightly different model year (2008-2010) or a Dodge Ram, the wiring and programming procedures for the Chrysler Town & Country are generally similar.
Valet Switch (Optional)
Your kit may include a valet switch, which can be used to temporarily disable the remote start system. If you choose not to use this feature, you can tuck the switch under the dash or cut it off and insulate the wire ends separately.
Betjeningsvejledning
This remote start system is designed to work with your vehicle's existing factory key fobs. No additional remotes are required.
To Remote Start Your Vehicle:
- Ensure your vehicle is in Park and all doors are closed.
- Tryk på "lock" button on your factory remote three (3) times consecutively.
- Allow approximately one second between each press.
- The vehicle's lights will flash, and the engine will start.
This feature allows you to warm or cool your vehicle from a distance, enhancing comfort.
To Shut Down Remote Start:
You can shut down the remote start system by either pressing the brake pedal inside the vehicle or by pressing the "lock" button on your factory remote three (3) more times.
To Drive After Remote Start:
Unlock the vehicle doors with your remote. Without pressing the brake, insert your key into the ignition and turn it to the ON/RUN position. The vehicle will then operate normally.
Opretholdelse
The MPC remote start system is designed for minimal maintenance. Ensure all connections remain secure and free from moisture or damage. Periodically check for any loose wiring or unusual operation. No user-serviceable parts are inside the module.
Fejlfinding
Hvis du støder på problemer med dit fjernstartsystem, kan du overveje følgende almindelige fejlfindingstrin:
- Systemet starter ikke: Verify that the vehicle is in Park, all doors are closed, and the hood is securely latched. Ensure the factory remote's battery is not depleted.
- Incorrect Key Type: Confirm your vehicle has a Push-to-Start ignition. The system is not compatible with traditional key-start vehicles. Refer to the "Identifying Your Key Type" video in the Setup section.
- Programmeringsproblemer: If the system is not responding, re-attempt the programming steps as outlined in the installation guide.
- Betjent tilstand: Check if the valet switch (if installed) is in the OFF position, which disables the remote start function.
For persistent issues, please contact MPC Technical Support.
Specifikationer
- Varens vægt: 2 pund
- Produktdimensioner: 8 x 5 x 2 tommer
- Varemodelnummer: B-4966-179
- Fabrikant: MPC-produkter
Garantioplysninger
MPC remote starters and alarms carry a limited lifetime warranty through the manufacturer. Physical damage or damage resulting from improper installation will void the manufacturer's warranty.
- Første år: Kontakt MPC ved garantispørgsmål. Produktet skal returneres for kundens regning i forbindelse med garantiservice.
- Efter første år: Garantiproblemer skal håndteres direkte gennem producenten. Der kræves en kvittering fra det oprindelige køb.
The product is warranted to the end user, when properly installed and under normal conditions of use, to be free from defects in workmanship and materials for a period of one year from the provided date of purchase, to the original purchaser. This warranty does not cover abuse, operation inconsistent with the product's design, or damage from environmental exposure. If a defect is deemed "under warranty," MyPushcart will, at its option, repair or replace the product free of charge. MyPushcart is not liable for installation charges, loss, or damage incurred during replacement or repair of any warranted product.
Teknisk support
MPC offers premier USA-based technical support from Tucson, AZ. Several different methods of support are available to assist you with any questions or installation guidance. QR code instructions are included with your product to ensure access to the most up-to-date information.
