FLEXISPOT B08WXFMPQQ

FLEXISPOT Comhar Electric Standing Desk (Model B08WXFMPQQ) User Manual

Din guide til montering, betjening og vedligeholdelse.

1. Introduktion

This manual provides essential instructions for the assembly, operation, and care of your FLEXISPOT Comhar Electric Standing Desk. Please read this manual thoroughly before assembly and use to ensure proper function and safety. Keep this manual for future reference.

FLEXISPOT Comhar Electric Standing Desk with drawer and USB ports

Image: The FLEXISPOT Comhar Electric Standing Desk, featuring a bamboo-look desktop, black frame, integrated drawer, and control panel with USB ports.

2. Sikkerhedsoplysninger

  • Always ensure the desk is properly assembled and anchored.
  • Overskrid ikke den maksimale vægtgrænse på 100 lbs (45 kg).
  • Exercise caution when adjusting the desk height to prevent injury or damage to objects.
  • Hold børn og kæledyr væk fra skrivebordet under drift.
  • Ensure all cables are properly managed to avoid entanglement during height adjustments.
  • Do not place liquids directly on the control panel or near electrical components.

3. Pakkens indhold

Kontroller, at alle komponenter er til stede, før monteringen påbegyndes:

  • Desktop (Bamboo-Look Laminate)
  • Adjustable Frame (Black)
  • Electric Motor Lift Mechanism
  • Integreret opbevaringsskuffe
  • Control Panel with USB Charge Ports (Type-A and Type-C)
  • Samlebeslag (skruer, unbrakonøgle)
  • Instruktionsmanual (dette dokument)

4. Monteringsvejledning

The FLEXISPOT Comhar Electric Standing Desk is designed for easy assembly. The tabletop comes as a single piece, simplifying the process. Follow these steps carefully:

4.1. Rammesamling

  1. Pak alle komponenter ud, og læg dem på en ren, blød overflade for at forhindre ridser.
  2. Attach the drive rod to the motor and the opposite leg. Ensure the bolt is loose enough to rotate the drive rod if needed for proper fit, but do not rotate over 60 degrees.
  3. Connect the two leg frames using the crossbar. Ensure the pilot holes align with the bulges on the columns. Secure with screws.
  4. Attach the desk feet to the bottom of the leg columns. Pay attention to the direction of the desk feet; the long side should face the front.

Video: FLEXISPOT ET156W-C Installation Guide. This video demonstrates the assembly process for the desk frame and attachment to the desktop.

4.2. Attaching Desktop and Wiring

  1. Carefully place the assembled frame onto the underside of the desktop. Align the screw holes.
  2. Secure the frame to the desktop using the provided screws and tools.
  3. Install the adaptor holder onto the beam, next to the motor, ensuring the narrow side faces the motor.
  4. Connect all necessary cables: the motor cable, control panel cable, and power cable. Ensure secure connections. Use cable management clips if provided to keep wires tidy.
Desk dimensions and components

Image: Diagram illustrating the desk dimensions (47.4" x 23.8") and key components: Desktop, Desk frame, and Desk feet.

Smart control panel with USB ports and height presets

Image: Close-up of the smart control panel, highlighting height memory presets (1, 2, 3, 4), Type-C and Type-A USB ports, child lock, and up/down movement buttons.

5. Betjeningsvejledning

5.1. Electric Height Adjustment

The desk features a robust motor for smooth height transitions. Use the up and down arrow buttons on the control panel to adjust the desk height between 28.9 inches and 46.5 inches.

Large adjustment range of the standing desk

Image: Visual representation of the desk's height adjustment range, from a minimum of 28.9 inches to a maximum of 46.5 inches.

5.2. Programmable Height Presets

The control panel includes four programmable height presets (1, 2, 3, 4). To save a desired height:

  1. Adjust the desk to your preferred height using the up/down arrows.
  2. Press the 'M' button, then press the desired number button (1, 2, 3, or 4) to save the current height.
  3. For at genkalde en gemt højde skal du blot trykke på den tilsvarende talknap.

5.3. USB Charge Ports

The integrated USB ports (Type-A and Type-C) allow you to charge up to three devices. Note that USB ports may temporarily pause charging while the desk height is being adjusted.

5.4. Antikollisionsteknologi

The desk is equipped with an anti-collision feature. If an obstacle is detected during height adjustment, the desk will automatically stop and reverse slightly to prevent damage.

Anti-collision technology in action

Image: The desk's anti-collision feature is demonstrated, showing the desk stopping and reversing upon encountering an obstacle.

6. Vedligeholdelse

  • Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de er spændte.
  • Clean the desktop surface with a soft, damp klud. Undgå slibende rengøringsmidler eller stærke kemikalier.
  • Hold motoren og de elektriske komponenter fri for støv og fugt.
  • Do not attempt to disassemble or repair the motor or control unit yourself. Contact customer support for assistance.

7. Fejlfinding

ProblemMulig årsagLøsning
Skrivebordet bevæger sig ikke.Power cable disconnected, motor cable loose, control panel issue.Check all cable connections. Ensure power is supplied. Reset the desk by unplugging for 30 seconds and plugging back in.
Skrivebordet bevæger sig ujævnt eller laver usædvanlige lyde.Ujævn belastning, løse skruer, blokering.Distribute weight evenly on the desktop. Check for loose screws and tighten. Ensure no objects are obstructing the legs.
USB-porte oplades ikke.Desk is adjusting height, cable issue, device incompatibility.Charging pauses during height adjustment; wait for movement to stop. Check USB cables. Ensure device supports USB charging.
Antikollisionsfunktionen udløses ofte.Obstacles in the path of movement.Clear the area around the desk legs and under the desktop.

8. Specifikationer

FeatureDetalje
MærkeFLEXISPOT
ModelnummerB08WXFMPQQ
Produktdimensioner47.3" D x 23.7" B x 47.6" H
FarveBamboo Texture/Black
StilModerne
GrundmaterialeMetal
Finish TypePulverlakeret
Speciel funktionJusterbar højde
Anbefalede anvendelserArbejder
Inkluderede komponenterIndbygget USB-port
Maksimal vægtanbefaling242 Pounds (Note: Feature bullets state 100 lbs, using the higher spec from detailed specifications)
GarantitypeBegrænset
Påkrævet samlingJa
Indeholder alt monteringsværktøjJa
Antal skuffer1
Bordpladetykkelse2.6 tommer
Maksimal højde120.9 centimeter (47.6 tommer)
Minimum højde23.6 tommer
er elektriskJa

9. Garanti og support

This FLEXISPOT Comhar Electric Standing Desk comes with a Limited Warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included with your product or visit the official FLEXISPOT webwebsted.

For further assistance, you may contact FLEXISPOT customer support directly.

Relaterede dokumenter - B08WXFMPQQ

Preview FlexiSpot E2Q elektrisk hæve-sænkebord: Installationsvejledning og specifikationer
Omfattende installationsvejledning og specifikationer for det elektriske FlexiSpot E2Q-højdejusterbare skrivebord. Lær, hvordan du samler, betjener og fejlfinder dit højdejusterbare skrivebord.
Preview FlexiSpot EH1-EU elektrisk ståbordsstel brugermanual
Omfattende brugermanual til FlexiSpot EH1-EU elektrisk hæve-sænkebordsstel, med detaljerede specifikationer, monteringsvejledning, ledningsføring, betjening og fejlfinding for optimal brug.
Preview FlexiSpot E7QB 4-bens stående skrivebordsstel brugermanual og garanti
Omfattende brugermanual til FlexiSpot E7QB 4-bens hæve-sænkebordsstel, der dækker installation, brug, fejlfinding og garantioplysninger. Lær, hvordan du samler, betjener og vedligeholder dit justerbare skrivebord.
Preview FlexiSpot EG8B/EG8W installationsvejledning og begrænset garanti
Dette dokument indeholder en omfattende installationsvejledning og begrænset garantiinformation for det justerbare FlexiSpot EG8B/EG8W-skrivebord. Det beskriver specifikationer, monteringstrin, betjening af tastatur, fejlfinding, sikkerhedsforanstaltninger og garantivilkår.
Preview Monteringsvejledning til FlexiSpot EC1 elektrisk højdejusterbart stående skrivebord
Denne samlevejledning indeholder trinvise instruktioner til opsætning af det elektriske højdejusterbare FlexiSpot EC1-skrivebord. Den indeholder specifikationer, deleliste, samleprocedurer, betjening af tastatur, fejlfindingstips og garantioplysninger.
Preview FlexiSpot E2LB-V2/E2LW-V2 Elektrisk Højdejusterbart Bord Brugermanual
Brugermanual til FlexiSpot E2LB-V2 og E2LW-V2 elektriske højdejusterbare skriveborde, der dækker montering, betjening, tekniske specifikationer og fejlfinding.