Indledning
This manual provides comprehensive instructions for the installation, operation, and maintenance of your MPC 1-Button Remote Start System. This system is designed for specific 2019-2022 Ford Transit Connect models equipped with an automatic transmission. Please read all instructions carefully before proceeding with installation or operation.
Pakkens indhold
Bekræft, at alle nedenstående komponenter er til stede i din pakke:
- Remote Start Data Interface Module
- Vehicle-Specific T-Harness
- Two (2) Ultra-Compact 1-Button Remote Transmitters
- Installation and User Guide (this document)
This image displays the complete MPC 1-Button Remote Start System. It includes the main control module, a vehicle-specific T-harness for simplified installation, and two compact 1-button remote transmitters.
Nærbillede view of the two 1-button remote transmitters, which provide extended range operation, alongside the necessary wiring components for the remote start system.
Note: This system is designed for vehicles with Automatic Transmission ONLY.
Installation (Opsætning)
The MPC remote start system features a plug-and-play T-Harness design, significantly reducing the complexity of installation by minimizing the number of required wiring connections. Firmware is preloaded for your specific vehicle.
Installationsproces overståetview:
- Bekræft kompatibilitet: Ensure your vehicle is a 2019-2022 Ford Transit Connect with an automatic transmission.
- Locate Connection Points: Refer to the detailed instructions provided via the QR code for specific plug locations within your vehicle.
- Connect T-sele: Plug the T-Harness into the designated vehicle connectors.
- Connect Data Module: Attach the remote start data interface module to the T-Harness.
- Test system: Follow the programming and testing steps outlined in the detailed instructions to ensure proper functionality.
A visual gauge illustrating the ease of installation for this remote start system, pointing towards the 'Easier' side, indicating a user-friendly setup process.
This image highlights the distinction between vehicles equipped with a push-button start ignition and those with a traditional key ignition. It serves as a reminder to verify that the purchased remote start kit is compatible with your vehicle's specific ignition type.
A person with basic knowledge of car electronics wiring should be able to install this product successfully. For detailed, step-by-step instructions and plug locations, please refer to the QR code provided with your product for the most up-to-date information.
Operation
Your MPC 1-Button Remote Start System allows you to start or stop your vehicle's engine from a distance of up to 1,500 feet using the included 1-button remote transmitters. Depending on your vehicle and data module configuration, additional functions such as lock and unlock may also be available.
Remote Start/Stop Procedure:
- At begynde: Press and release the button on your 1-button remote transmitter three (3) times within 3 seconds. The vehicle's parking lights will flash, and the engine will start.
- At stoppe: While the engine is running via remote start, press and release the button on your 1-button remote transmitter three (3) times within 3 seconds. The engine will shut off.
Entering the Vehicle After Remote Start:
After remote starting your vehicle, unlock the doors using your factory remote or the MPC remote (if configured for unlock). Enter the vehicle, insert your key into the ignition (or press the brake pedal for push-to-start models), and turn it to the 'ON' or 'RUN' position before pressing the brake pedal. This will transfer control from the remote start system to the vehicle's ignition.
Optional Remote Upgrades:
This system is compatible with optional remote upgrades:
- EVO-REMOTE-1 Ready: Allows for the addition of two (2) Ultra-Compact 1-Button 1-Way Keyless Entry Remotes.
- EVO-REMOTE-4 Ready: Allows for the addition of two (2) Long-Range 4-Button 2-Way Keyless Entry Remotes.
Opretholdelse
The MPC Remote Start System is designed for minimal maintenance. Regular care primarily involves the remote transmitters.
Remote Transmitter Battery Replacement:
If the range of your remote transmitter decreases significantly or the indicator light fails to illuminate, the battery may need replacement. Refer to the specific instructions for your 1-button remote for battery type and replacement procedure. Typically, this involves opening the remote casing and replacing the coin-cell battery.
Generel pleje:
- Keep remote transmitters dry and away from extreme temperatures.
- Avoid dropping the remote transmitters or subjecting them to physical shock.
- Ensure all wiring connections remain secure and free from corrosion.
Fejlfinding
If you experience issues with your remote start system, consider the following common troubleshooting steps:
- Systemet svarer ikke: Check the battery in your remote transmitter. Ensure you are within the operational range of the system.
- Motoren starter ikke: Verify that your vehicle's battery is charged and that there are no active warning lights on your dashboard. Ensure all doors, hood, and trunk are closed.
- Reduceret rækkevidde: Replace the remote transmitter battery. Ensure there are no large obstructions between the remote and the vehicle.
- Installationsproblemer: Double-check all T-Harness connections. Refer to the detailed installation guide accessed via the QR code for specific wiring diagrams and troubleshooting tips.
For persistent issues, please contact MPC Technical Support.
Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | B-4959-235 |
| ASIN | B08WR81MQV |
| Kompatibilitet | 2019-2022 Ford Transit Connect (Automatic Transmission Only) |
| Fjern rækkevidde | Op til 1,500 fod |
| Varens vægt | 2 pund |
| Pakkedimensioner | 15.5 x 12 x 0.5 tommer |
| Included Remotes | Two (2) 1-Button Remotes |
| Installationstype | Plug-N-Play T-Harness |
Garantioplysninger
MPC remote starters carry a limited lifetime warranty through the manufacturer. This warranty is provided to the original purchaser of the product, when properly installed and under normal conditions of use, to be free from defects in workmanship and materials for a period of one year from the date of purchase.
Garanti undtagelser:
- Fysisk skade på produktet.
- Damage due to improper installation.
- Abuse or operation in a manner inconsistent with the product's design.
- Damage resulting from exposure to the elements.
Garantikravsprocedure:
- Within the first year: Contact MPC for warranty issues. The product must be returned at the customer's expense for warranty service.
- After the first year: Warranty issues must be handled directly through the manufacturer. A receipt from the original purchase will be required.
If a defect is considered 'under warranty', MPC will, at its option, repair or replace the product free of charge to the original purchaser. MPC is not liable for any installation charges, loss, or damage of any kind incurred in the replacement or repair of any warranted product.
Teknisk support
MPC provides technical support from Tucson, AZ, United States. Several different methods of support are available to assist you with installation, operation, and troubleshooting.
- QR Code Instructions: Your product includes a QR code. Scanning this code will direct you to the most up-to-date installation guides, tip sheets, and support information specific to your vehicle and system.
- Online ressourcer: Visit the official MPC website for FAQs, video tutorials, and additional support documentation.
- Direkte kontakt: Contact MPC customer service for personalized assistance. Refer to the contact information provided with your product or on the official MPC webwebsted.
A smartphone screen displaying a digital 'Tip Sheet' from MPC, providing quick access to installation guides and support information.
