Autek IKEY820 Car Key Programmer User Manual

1. Introduktion

The Autek IKEY820 is a professional car key programming tool designed for locksmiths and automotive service professionals. This device facilitates various key-related operations, including reading PIN codes, adding new keys, erasing existing keys, and performing all-keys-lost programming for a wide range of vehicle makes and models. This manual provides detailed instructions for the proper setup, operation, and maintenance of your IKEY820 device.

2. Produktet er slutview

2.1 Pakkens indhold

Ved udpakning skal du kontrollere, at alle komponenter er til stede:

Figure 1: Autek IKEY820 device, carrying case, main cable, USB cable, and OBDII connectors.

• Autek IKEY820 Main Unit
• Hoveddiagnostisk kabel
• USB kabel
• OBDII Connectors (various types)
• Beskyttende bæretaske

2.2 Nøglefunktioner

Figur 2: Overview of Autek IKEY820 key features.

• Supports vehicle models up to 2017 (and newer for specific brands/functions).
• Provides roadside key remote programming for drivers.
• Programs proximity and non-proximity keys.
• Programs smart keys and flip keys.
• Supports programming of aftermarket and OEM keys.
• Reads immobilizer PIN codes from Engine ECU or Body Control Module.
• Reads pre-coded data from Engine ECU or Body Control Module.
• Reads and clears fault codes.
• Clears key memory.
• Professional car key programming for locksmiths, garages, and car body repair centers.

2.3 Enhedslayout

Figure 3: Labeled components of the Autek IKEY820 device.

• Fn-tast: Function key for specific operations.
• ESC nøgle: Escape key to go back or cancel an operation.
• OK-tast: Confirmation key.
• Up/Down/Left/Right Keys: Navigation buttons for menu selection.
• Hovedkabelport: Connects the main diagnostic cable to the vehicle's OBDII port.
• USB-port: Til tilslutning til en computer for opdateringer eller dataoverførsel.
• Strømport: For external power supply if needed.

3. Opsætning

1. Tænd: Connect the IKEY820 to the vehicle's OBDII port using the main diagnostic cable. The device will typically power on automatically. If not, ensure the vehicle's ignition is on (but not necessarily running).
2. Første opstart: Allow the device to boot up. The main menu will appear on the 4.3-inch screen.
3. Sprogvalg: If prompted, select your preferred language using the navigation keys and confirm with the OK key.
4. Systemtjek: The device may perform a brief system check. Ensure no error messages are displayed.

4. Betjeningsvejledning

The IKEY820 operates through a menu-driven interface. Use the Up/Down/Left/Right keys to navigate and the OK key to confirm selections. The ESC key is used to return to the previous menu.

4.1 Nøgleprogrammeringsfunktioner

Figure 4: Autek IKEY820 displaying key programming options and settings menu.

• Read Pin Code: Access this function to retrieve the vehicle's immobilizer PIN code, which is often required for key programming.
• Add Keys Programming: Use this option to program new keys to the vehicle's immobilizer system. Follow the on-screen prompts carefully, which may include inserting keys, turning the ignition, or pressing remote buttons.
• Erase Keys: This function allows for the deletion of existing keys from the vehicle's memory. This is useful when a key is lost or stolen to prevent unauthorized access.
• All Keys Lost Programming: In situations where all vehicle keys are lost, this advanced function enables the programming of new keys from scratch. This process may require additional steps or specific vehicle data.

4.2 Specific Vehicle Functions

• Ford: Supports many models from 1999 to 2017. Escape and Focus models up to 2018 may not require a PIN code for programming keys, deleting keys, or all keys lost procedures.
• Mustang: Supports many models from 1999 to 2017 for programming flip keys and smart keys.
• Chevrolet: Compatible with many models up to 2016 for reading passwords, adding keys, and all keys lost scenarios.
• GMC Yukon: Supports models up to 2016.
• Nissan: Up to 2018, includes PIN Code Calculator (20-digital PIN code, 5 to 4-digital PIN code), Glove code, ICU S/N, SEC S/N to PIN code.
• Jeep Cherokee and Renegade: Supports 5-digit PIN code reading and programming.
• Mitsubishi: Supports models up to 2019.

5. Køretøjsdækning

The Autek IKEY820 offers extensive vehicle coverage across various regions:

Figure 5: Regional vehicle coverage for the Autek IKEY820.

6. Vedligeholdelse

• Rensning: Brug en blød, tør klud til at rengøre enheden. Undgå slibende rengøringsmidler eller opløsningsmidler.
• Opbevaring: Store the IKEY820 in its protective carrying case in a cool, dry place when not in use.
• Softwareopdateringer: Regularly check for software updates to ensure optimal performance and expanded vehicle coverage. Updates can typically be performed via the USB port by connecting to a computer and using the manufacturer's update tool. The device's settings menu includes an option for "UPDATE HW" (Hardware Update), which may refer to firmware updates.
• Kabelpleje: Inspect diagnostic cables for damage before each use. Replace any frayed or damaged cables immediately.

7. Fejlfinding

• Enheden tænder ikke:
  • Ensure the diagnostic cable is securely connected to the vehicle's OBDII port.
  • Kontroller, at køretøjets tænding er tændt.
  • Kontroller køretøjets batterivolumentage.
  • If available, try connecting an external power supply to the device's power port.
• Kommunikationsfejl:
  • Ensure the diagnostic cable is correctly connected to both the IKEY820 and the vehicle.
  • Kontroller, at køretøjets tænding er tændt.
  • Kontroller, om der er sprungne sikringer i køretøjets OBDII-kredsløb.
  • Try another vehicle to rule out a device issue.
• Fejl i nøgleprogrammering:
  • Double-check that the correct vehicle make, model, and year have been selected.
  • Ensure the PIN code (if required) is correct.
  • Følg alle instruktioner på skærmen nøje.
  • Verify the new key transponder is compatible with the vehicle.
  • Ensure the vehicle's battery is adequately charged during the programming process.

8. Specifikationer

9. Garanti og support

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact Autek customer service directly. Keep your purchase receipt and product serial number handy when contacting support.