WORKPRO 12V lyserød batteridrevet boremaskine og værktøjssæt til hjemmet brugermanual

1. Vigtige sikkerhedsoplysninger

Læs og forstå altid alle sikkerhedsadvarsler, instruktioner, illustrationer og specifikationer, der følger med dette elværktøj. Manglende overholdelse af alle nedenstående instruktioner kan resultere i elektrisk stød, brand og/eller alvorlig personskade.

• Hold arbejdsområdet rent og godt oplyst. Rodede eller mørke områder inviterer til ulykker.
• Brug ikke elværktøj i eksplosive atmosfærer, såsom i nærheden af ​​brændbare væsker, gasser eller støv. Elværktøj danner gnister, som kan antænde støv eller dampe.
• Hold børn og omkringstående væk, mens du betjener et elværktøj. Distraktioner kan få dig til at miste kontrollen.
• Bær passende personlige værnemidler, herunder sikkerhedsbriller, høreværn og handsker.
• Ensure the drill driver is fully charged before initial use to ensure optimal performance and safety.
• All tools in this kit meet or exceed ANSI (American National Standards Institute) specifications for added safety.

2. Produktet er slutview og komponenter

The WORKPRO 12V Pink Cordless Drill and Home Tool Kit is a comprehensive 61-piece set designed for DIY projects and home maintenance. It includes a powerful cordless drill and a variety of essential hand tools, all neatly organized in a portable storage bag.

Figur 2.1: Overview of the WORKPRO 61-piece Pink Cordless Drill and Home Tool Kit, including the drill, hand tools, and storage bag.

2.1 Cordless Drill Components

Figure 2.2: Detailed diagram illustrating the key components of the 12V Cordless Drill, including the chuck, torque adjustment collar, 2-speed gear control, LED light, variable speed switch, battery capacity indicator, forward/reverse rotation control, soft grip handle, battery pack release button, and battery pack.

• chuck: Indeholder borehoveder og skruetrækkerhoveder.
• Momentjusteringskrave: Allows selection of 18+1 torque settings for various applications.
• 2-Speed Gear Control: Switches between low speed (0-400 RPM) for driving screws and high speed (0-1500 RPM) for drilling.
• LED lys: Oplyser arbejdsområdet for forbedret udsyn.
• Variable Speed Switch: Controls the drill's speed based on pressure applied.
• Batterikapacitetsindikator: Viser den resterende batteriopladning.
• Forward/Reverse Rotation Control: Changes the direction of rotation for drilling or removing screws.
• Blødt greb: Giver komfortabel og sikker håndtering.
• Knap til udløser af batteripakke: Bruges til at afmontere batteripakken.
• Batteri pakke: 12V Lithium-ion battery, with an extra 2AH battery included for replacement.

2.2 Hand Tool Components

Figure 2.3: A selection of the hand tools included in the kit, such as a hammer, utility knife, measuring tape, level, pliers, and adjustable wrench, along with various drill bits and screwdriver bits.

The kit includes a comprehensive selection of hand tools for various household tasks:

• Klohammer
• Measuring Tape (3M/10ft)
• Utility Kniv
• vaterpas
• Slip Joint Tænger
• Justerbar skruenøgle
• Assorterede borekroner
• Assorterede skruetrækkerbits
• And other essential accessories.

3. Opsætning og montering

3.1 Opladning af batteriet

The 12V Lithium-ion battery should be fully charged before its first use to ensure optimal performance and battery longevity. Use only the WORKPRO 12V Li-ion Charger provided with the kit.

Figure 3.1: The 12V Lithium-ion battery pack connected to its charger for recharging.

1. Tilslut opladeren til en almindelig stikkontakt.
2. Insert the battery pack into the charger. Ensure it clicks into place securely.
3. Allow the battery to charge until the indicator light on the charger signals a full charge (refer to charger manual for specific indicator details).
4. Once charged, disconnect the battery from the charger and unplug the charger from the outlet.

3.2 Installation/fjernelse af batteripakken

1. To install: Align the battery pack with the base of the drill handle and slide it in until it clicks securely into place.
2. To remove: Press the battery pack release button located on the side of the battery pack and slide the battery out of the drill handle.

3.3 Montering af bore-/skruetrækkerbits

Figur 3.2: Nærbillede view of the keyless chuck, demonstrating how to open and close it to insert or remove drill and screwdriver bits.

1. Drej spændepatronen mod uret for at åbne kæberne.
2. Sæt det ønskede bor eller skruetrækkerhoved i patronen.
3. Drej spændepatronen med uret for at stramme kæberne sikkert omkring boret. Sørg for, at boret er centreret og fastholdt.

4. Betjeningsvejledning

4.1 Variable Speed and Torque Adjustment

The drill features a variable speed trigger and a 2-speed gear control, along with an 18+1 position torque adjustment collar, allowing precise control for various tasks.

Figure 4.1: Illustration of the 2-speed transmission, recommending 0-1500 RPM for drilling and 0-400 RPM for screwdriving applications.

• Hastighedsvalg: Use the 2-speed gear control switch on top of the drill.
  • Position '1' (Low Speed): 0-400 RPM, ideal for driving screws and applications requiring higher torque.
  • Position '2' (High Speed): 0-1500 RPM, suitable for drilling into various materials.
• Momentjustering: Rotate the torque adjustment collar to select the desired torque setting (1-18) or the drill mode.
  • Lavere indstillinger (1-5) er til små skruer eller bløde materialer.
  • Højere indstillinger (6-18) er til større skruer eller hårdere materialer.
  • The drill icon setting is for drilling applications, providing maximum torque.
• Trigger med variabel hastighed: The speed of the drill is controlled by the amount of pressure applied to the trigger switch. Pressing further increases the speed.

4.2 Fremad/bagudgående kørsel

The forward/reverse rotation control switch is located above the trigger. Push the switch to the left for forward rotation (drilling/driving) and to the right for reverse rotation (removing screws/bits). Center position locks the trigger for safety.

4.3 Brug af LED-lyset

Figure 4.2: The integrated LED light on the drill illuminating a dark work area, enhancing visibility during operation.

The integrated LED light automatically illuminates when the trigger is pressed, providing improved visibility in dimly lit work areas.

4.4 General Use of Hand Tools

The hand tools included in this kit are designed for common household tasks. Always select the correct tool for the job and ensure it is used safely and correctly.

Figure 4.3: A person using the WORKPRO hammer to secure a frame, demonstrating typical use of the hand tools.

Figure 4.4: A person using the WORKPRO cordless drill to assemble furniture, showcasing the drill's utility for common home projects.

• Hammer: Use for driving and pulling nails. Ensure a firm grip and clear swing path.
• Målebånd: For accurate measurements. Extend carefully and retract slowly.
• Universalkniv: For cutting various materials. Always extend blade only as needed and retract fully after use. Use with caution.
• Vaterpas: For checking horizontal and vertical alignment.
• Pliers/Wrench: For gripping, bending, or turning objects. Ensure a secure grip to prevent slipping.

5. Vedligeholdelse

5.1 Rengøring

• Always disconnect the battery pack from the drill before cleaning.
• Brug en blød, damp cloth to wipe down the exterior of the drill and hand tools. Do not use harsh chemicals or abrasive cleaners.
• Hold ventilationsåbningerne fri for støv og snavs for at forhindre overophedning.

5.2 Batteripleje og -opbevaring

• Opbevar batterier på et køligt, tørt sted væk fra direkte sollys og ekstreme temperaturer.
• Ved langtidsopbevaring skal batteriet oplades til cirka 50% kapacitet.
• Do not store batteries in a discharged state to prevent deep discharge and damage.
• The portable storage bag is ideal for organizing and protecting all tools when not in use.

6. Fejlfinding

7. Specifikationer

8. Garanti og support

For information regarding product warranty, returns, or technical support, please refer to the warranty card included with your purchase or visit the official WORKPRO website. Contact details for customer service are typically provided on the manufacturer's packaging or webwebsted.

WORKPRO Tools is committed to quality and customer satisfaction.