INVIROX 2024 Dog Training Collar

INVIROX 2024 Dog Training Collar User Manual

Model: 2024 Dog Training Collar

1. Introduktion og overview

The INVIROX 2024 Dog Training Collar is an electronic training system designed to assist in effective dog training. It features a remote control and a waterproof receiver collar, offering multiple training modes including beep, vibration, and static stimulation. This manual provides detailed instructions for safe and proper use, setup, operation, and maintenance of your training collar.

Nøglefunktioner:

  • Træningstilstande: Beep (1-8 levels), Vibration (1-16 levels), Static Stimulation (1-99 levels).
  • Rækkevidde: Up to 1100 yards (approximately 1000 meters).
  • Vandtæt: IP67 rated receiver for use in various weather conditions.
  • Sikkerhed: Keypad lock feature on the remote to prevent accidental activation.
  • Batteri: Rechargeable remote and receiver with long-lasting battery performance.
  • Justerbar: Suitable for dogs weighing 8 to 110 pounds.

2. Pakkens indhold

Kontroller venligst pakkens indhold for at sikre, at alle varer er til stede og i god stand:

  • Fjernbetjening
  • Modtagerhalsbånd
  • Justerbar nylonrem
  • Protective Rubber Contact Point Covers
  • Metal Contact Points (short and long sets)
  • Test pære
  • 2-in-1 Micro USB Charging Cable
  • Wrist Strap for Remote
Image showing all components included in the INVIROX Dog Training Collar package: remote, receiver, strap, protective rubber covers, metal prongs, test bulb, micro USB cable, and wrist strap.

Figur 2.1: Inkluderede komponenter

This image displays the complete set of items you should find in your INVIROX Dog Training Collar package, including the remote, receiver, collar strap, various contact points, charging cable, and accessories.

3. Sikkerhedsoplysninger og vigtige advarsler

Read all instructions before using this product. Failure to follow these instructions could result in harm to your dog or damage to the product.

  • Ikke til aggressive hunde: Do not use this product on aggressive dogs. If your dog is aggressive, consult a professional dog trainer or veterinarian.
  • Hudirritation: Prolonged wear or improper fit can cause skin irritation or pressure necrosis (commonly known as 'collar sores').
    • Undgå at efterlade halsbåndet på hunden i mere end 12 timer om dagen.
    • Reposition the collar on the dog's neck every 1 to 2 hours.
    • Check the contact area daily for signs of rash or sores. If a rash or sore is found, discontinue use of the collar until the skin has healed.
    • Always use the appropriate length of contact points for your dog's coat type to ensure proper contact without excessive pressure.
  • Børn: Keep the training collar and remote control out of reach of children.
  • Korrekt pasform: The collar should fit snugly, but loose enough to allow one finger to fit between the strap and your dog's neck.
  • Statisk stimulering: Static stimulation should be used as a last resort and at the lowest effective level. Always start with beep or vibration modes.
  • Training Tool: This device is a training tool, not a punishment device. Use it responsibly and in conjunction with positive reinforcement training methods.
Image showing a child and a dog, with an inset highlighting the keypad lock feature on the remote control.

Figure 3.1: Keypad Lock for Safety

This image illustrates the importance of the keypad lock feature on the remote control, designed to prevent accidental activation of training modes, ensuring safer operation, especially around children.

4. Opsætning

4.1 Opladning af enhederne

Before first use, fully charge both the remote control and the receiver collar.

  1. Connect the 2-in-1 Micro USB charging cable to a standard USB power adapter (not included) or a computer USB port.
  2. Plug the two micro USB ends into the charging ports on the remote control and the receiver collar.
  3. The indicator lights on both devices will show charging status (e.g., red for charging, green for fully charged).
  4. Charging typically takes 2-3 hours. Once fully charged, disconnect the cable.

Batterilevetid: The remote control can last up to 45 days on standby, and the receiver collar up to 15 days per charge, depending on usage.

Diagram illustrating the long-lasting battery life of the remote and receiver, and the 2-in-1 micro USB charging cable.

Figur 4.1: Opladning og batterilevetid

This diagram shows the remote and receiver, highlighting their respective battery durations and the shared micro USB charging cable.

4.2 Montering af modtagerhalsbåndet

Korrekt pasform af modtagerhalsbåndet er afgørende for effektiv og sikker drift.

  1. Sørg for, at hunden står komfortabelt.
  2. Place the receiver collar around your dog's neck, positioning the receiver unit centrally under the chin or on the side of the neck.
  3. The contact points must make direct contact with your dog's skin. For dogs with thick coats, you may need to trim some fur or use the longer contact points provided.
  4. Adjust the strap so it is snug, but not too tight. You should be able to fit one finger between the collar strap and your dog's neck.
  5. The collar is designed for dogs weighing between 8 and 110 pounds.
Image showing various dog breeds wearing the INVIROX training collar, illustrating its adjustable nature for different sizes from 8lb to 110lb.

Figure 4.2: Adjustable Collar for All Dog Sizes

This image demonstrates the versatility of the INVIROX training collar, showing it comfortably fitted on dogs of various sizes, from small to large, emphasizing its adjustability for weights between 8 and 110 pounds.

4.3 Parring af fjernbetjening og modtager

The remote and receiver are typically pre-paired from the factory. If re-pairing is needed or you are adding a second receiver:

  1. Sørg for, at begge enheder er fuldt opladede og slukkede.
  2. Tænd for fjernbetjeningen.
  3. Tryk og hold tænd/sluk-knappen på modtagerhalsbåndet nede, indtil indikatorlampen blinker hurtigt.
  4. Within 10 seconds, press any training mode button (Beep, Vibration, or Static Stimulation) on the remote control.
  5. The receiver's indicator light will stop flashing and remain solid, indicating successful pairing.

5. Betjeningsvejledning

5.1 Tænd/sluk

  • Fjern: Press and hold the power button until the screen illuminates. To turn off, press and hold the power button until the screen turns off.
  • Modtager: Press and hold the power button until the indicator light flashes. To turn off, press and hold the power button until the indicator light turns off.

5.2 Træningstilstande og -niveauer

The remote offers three distinct training modes:

  • Bip-tilstand: Provides an audible tone. Levels 1-8.
  • Vibrationstilstand: Delivers a tactile vibration. Levels 1-16.
  • Statisk stimuleringstilstand: Provides a static pulse. Levels 1-99.

To select a mode, press the corresponding button on the remote. Use the '+' and '-' buttons to adjust the intensity level within each mode. Always start with the lowest effective level and increase gradually if necessary.

Image showing a dog with the collar, and an inset of the remote control displaying the three training modes: Beep (1-8 tones), Vibration (1-16 levels), and E Stim (1-99 levels).

Figure 5.1: Training Modes and Levels

This image illustrates the three primary training modes available on the INVIROX remote control, along with their respective adjustable intensity levels, providing a visual guide for selecting the appropriate correction.

5.3 Tastaturlås

To prevent accidental activation of training modes, slide the keypad lock switch on the side of the remote control to the locked position. This will disable the training buttons until unlocked.

5.4 Double Functions: Light and Dog Switching

The remote control features buttons with dual functions:

  • Lys knap: Serves as a light button for visibility in low-light conditions and also allows for switching between training modes safely.
  • Dog Switching Button (1/2): Functions as an On/Off button for the receiver and allows switching between two paired dog receivers if you are training two dogs simultaneously.
Close-up image of the remote control highlighting the 'Double Functions' buttons: one for light and mode switching, and another for receiver on/off and switching between two dogs.

Figure 5.2: Remote Control Double Functions

Denne detaljerede view of the remote control highlights the multi-functional buttons, explaining their roles in activating the light, switching training modes, and managing multiple dog receivers.

Image of a person training a dog off-leash in a grassy field, demonstrating the 1100-yard operation range of the collar.

Figure 5.3: 1100-Yard Operation Range

This image depicts the collar's effective operation range, showing a dog being trained off-leash at a distance, emphasizing the 1100-yard capability for outdoor use.

6. Vedligeholdelse

Regular maintenance ensures the longevity and proper functioning of your INVIROX Dog Training Collar.

  • Rensning: Clean the receiver collar and remote control regularly with a damp klæde. Undgå at bruge skrappe kemikalier eller slibende rengøringsmidler.
  • Kontaktpunkter: Periodically check the contact points for dirt or debris. Clean them to ensure good contact with your dog's skin.
  • Rem: Inspect the nylon strap for wear and tear. Replace if damaged.
  • Opbevaring: When not in use for extended periods, store the devices in a cool, dry place. Ensure they are fully charged before storage to maintain battery health.
Image of a dog shaking off water, highlighting the IP67 waterproof rating of the receiver collar.

Figure 6.1: IP67 Waterproof Receiver

This image demonstrates the IP67 waterproof capability of the receiver collar, indicating its durability and suitability for use in wet conditions, making cleaning and outdoor activities worry-free.

7. Fejlfinding

If you encounter issues with your INVIROX Dog Training Collar, refer to the following common problems and solutions:

ProblemMulig årsagLøsning
Receiver not responding to remoteLow battery on either device; Not paired; Out of rangeCharge both devices; Re-pair the remote and receiver; Ensure devices are within range.
Ingen statisk stimulationPoor contact with skin; Level too low; Test bulb not workingAdjust collar fit and contact points; Increase stimulation level; Test with the provided test bulb.
Kort rækkeviddeEnvironmental interference; Low batteryAvoid areas with strong electromagnetic interference; Ensure devices are fully charged.
Collar causing skin irritationImproper fit; Prolonged wearReposition collar frequently; Do not leave on for more than 12 hours; Check for sores daily.

If these solutions do not resolve the issue, please contact INVIROX Customer Support for further assistance.

8. Specifikationer

FeatureSpecifikation
Modelnavn2024 Hundetræningshalsbånd
MærkeINVIROX
Rækkevidde1100 yards (approx. 1000 meters)
Vandtæt vurderingIP67 (modtager)
TræningstilstandeBiplyd, vibration, statisk stimulering
Beep Levels1-8
Vibrationsniveauer1-16
Statiske stimuleringsniveauer1-99
Dog Weight Capacity8 - 110 kg
Modtagers vægtCa. 49 gram
Fjern batteriets levetidUp to 45 days (standby)
Modtager batterilevetidUp to 15 days (per charge)
MaterialePolycarbonat
ASINB08TP8Y266

9. Garanti og support

9.1 Garantioplysninger

The INVIROX 2024 Dog Training Collar comes with a 1 års garanti fra købsdatoen. Denne garanti dækker fabrikationsfejl og funktionsfejl ved normal brug. Den dækker ikke skader forårsaget af misbrug, ulykker, uautoriserede ændringer eller normal slitage.

9.2 Kundesupport

For any questions, concerns, or technical assistance regarding your INVIROX Dog Training Collar, please contact our customer support team. Our award-winning support is available to help you with setup, troubleshooting, and general inquiries.

Please refer to the product packaging or the official INVIROX website for the most current contact information for customer support.

Relaterede dokumenter - 2024 Hundetræningshalsbånd

Preview JUGBOW DT-68 Hundetræningshalsbånd Brugermanual og vejledning
Din essentielle guide til JUGBOW DT-68 hundetræningshalsbåndet. Denne brugermanual dækker opsætning, betjening, sikkerhedsforanstaltninger, fejlfinding og vedligeholdelse for effektiv og human hundetræning. Lær om funktioner som vibration, tone og stødtilstande, vandtæt design og lang rækkevidde.
Preview JUGBOW DT-68 Hundetræningshalsbånd Brugermanual | Funktioner, betjening og sikkerhed
Omfattende brugermanual til JUGBOW DT-68 hundetræningshalsbåndet. Lær om komponenter, betjening, sikkerhedsretningslinjer, fejlfinding og vedligeholdelse for effektiv kæledyrstræning.
Preview 2-i-1 fjernbetjent hundetræning og automatisk anti-gø halsbånd - brugs- og træningsvejledning
Denne vejledning indeholder omfattende instruktioner og tips til brug af 2-i-1-halsbåndet til fjernbetjent hundetræning og automatisk anti-gø-halsbånd. Lær om dets funktioner, betjening, sikkerhedsforanstaltninger og effektive træningsmetoder til din hund.
Preview Brugermanual til DT310 elektronisk træningshalsbåndssystem
Brugermanual til DT310 elektronisk træningshalsbåndssystem, der dækker funktioner, pakkeindhold, brugsanvisning, sikkerhedsretningslinjer, fejlfinding, specifikationer, garanti og FCC-overholdelse.
Preview Pikabiu p-halsbånd 628 hundetræningshalsbånd brugermanual
Omfattende brugermanual til Pikabiu p-collar 628 hundetræningshalsbåndet, der dækker funktioner, sikkerhed, betjening, opladning, parring, fejlfinding og garantioplysninger.
Preview SODOG KT47 Hundetræningshalsbånd Brugermanual - Fjernbetjeningssystem
Omfattende brugermanual til SODOG KT47 hundetræningshalsbåndet. Lær om komponenter, opsætning, opladning, funktioner som bip og vibration, manuel parring, kanalstyring, vedligeholdelse og FCC-overholdelse.