1. Produktet er slutview
The Einhell Power X-Change 5.2 Ah Battery Twinpack consists of two 18V 5.2 Ah Power X-Change PLUS batteries. These batteries are integral components of the versatile and fully interchangeable Einhell Power X-Change rechargeable battery system. Designed for universal use across all PXC devices, they offer significant cost savings and environmental benefits by allowing a single battery and charger to power multiple tools.
The 18V 5.2 Ah PXC PLUS battery is a high-end model within the Power X-Change family, suitable for TWIN-PACK applications requiring 36V. Its robust housing is engineered to resist dust, corrosion, and mechanical impacts. A protective rubber coating enhances impact resistance and provides a secure grip. A convenient trough handle facilitates easy removal from any tool.
Figure 1: Einhell Power X-Change 5.2 Ah Battery Twinpack. Each battery features a charge indicator with four green LEDs and a robust, ergonomic design.
2. Sikkerhedsinstruktioner
Always observe the following safety precautions when handling and using your Einhell Power X-Change batteries:
- Do not expose batteries to heat, direct sunlight, or fire.
- Kortslut ikke batteripolerne.
- Batterier må ikke nedsænkes i vand eller andre væsker.
- Store batteries in a cool, dry place, away from flammable materials.
- Only use original Einhell chargers for charging.
- Forsøg ikke at åbne, ændre eller reparere batteripakken.
- Opbevar batterier utilgængeligt for børn.
- In case of battery leakage, avoid contact with skin and eyes. Rinse affected areas with water and seek medical attention.
- Dispose of depleted batteries responsibly according to local regulations.
3. Opsætning og første brug
3.1 Udpakning
Carefully remove the batteries from their packaging. Inspect them for any signs of damage. If any damage is observed, do not use the batteries and contact customer support.
3.2 Opladning af batterierne
Before first use, fully charge both batteries. Use only an Einhell Power X-Change charger (sold separately). The charging process is as follows:
- Tilslut opladeren til en passende stikkontakt.
- Skub batteriet ind i opladeren, indtil det klikker på plads.
- The charger's indicator light will show the charging status. Refer to your charger's manual for specific light patterns.
- Once fully charged, the indicator light will change (e.g., solid green). Remove the battery from the charger.
The batteries feature a proactive battery management system and adapted charging cycles to optimize lifespan and performance.
4. Betjening af batterierne
4.1 Isætning af batteriet i et værktøj
Sørg for, at værktøjet er slukket, før du isætter eller fjerner batteriet.
- Align the battery with the battery slot on your Einhell Power X-Change tool.
- Skub batteriet godt ind i åbningen, indtil det klikker sikkert på plads.
- To remove, press the release button(s) on the battery (or tool, depending on design) and slide the battery out.
4.2 Battery Charge Indicator
Each battery is equipped with an LED charge indicator. Press the button next to the LEDs to check the current charge level:
- 4 lysdioder tændt: 75-100% opladning
- 3 lysdioder tændt: 50-75% opladning
- 2 lysdioder tændt: 25-50% opladning
- 1 LED tændt: 0-25% opladning (genoplad snart)
5. Vedligeholdelse og opbevaring
5.1 Rengøring
Wipe the battery surface with a clean, dry cloth. Do not use abrasive cleaners or solvents. Ensure the battery terminals are clean and free of debris.
5.2 Opbevaring
For optimal battery life, store batteries in a cool, dry place (ideally between 5°C and 20°C / 41°F and 68°F) and away from direct sunlight or extreme temperatures. If storing for extended periods, charge the batteries to approximately 50-75% capacity. Avoid storing fully discharged batteries.
6. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Batteriet oplades ikke. | Oplader ikke tilsluttet; defekt oplader; batteri for varmt/koldt; defekt batteri. | Check power connection; try another charger; allow battery to reach room temperature; contact customer support if battery is faulty. |
| Værktøjet fungerer ikke med batteri. | Battery not fully inserted; battery discharged; faulty tool; faulty battery. | Ensure battery is clicked into place; charge battery; test with another battery/tool; contact customer support. |
| Battery charge indicator not working. | Button malfunction; internal fault. | Ensure button is pressed firmly; if issue persists, contact customer support. |
7. Specifikationer
- Modelnummer: 4511526
- Batteritype: Lithium Ion (Li-Ion)
- Voltage: 18 V
- Kapacitet: 5.2 Ah (Amptidligere timer)
- Produktdimensioner: 4.84 x 3.03 x 2.87 tommer (12.3 x 7.7 x 7.3 cm)
- Varens vægt: 1.96 pounds (0.89 kg) per battery
- Antal batterier: 2 (included in twinpack)
- Anbefalet brug: Power Tools within the Einhell Power X-Change system
8. Garanti og support
Einhell products are manufactured with high-quality materials and undergo strict quality control. For information regarding warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Einhell webwebsted. For teknisk support, reservedele eller serviceforespørgsler, kontakt venligst Einhells kundeservice via deres officielle kanaler.
Officiel Einhell Webwebsted: www.einhell.com
