Indledning
This manual provides comprehensive instructions for the SHARP Digital Alarm with AccuSet. This automatic smart clock is designed for ease of use, eliminating the need for manual time adjustments. Its clear, bright LED display and intuitive controls make it an ideal timekeeping solution for any room.
The SHARP Digital Alarm Clock seamlessly integrates into your bedroom decor.
Produktegenskaber
- AccuSet automatisk tidsindstilling: Pre-programmed time for immediate use.
- Hurtig justering af sommertid (DST): Simple switch for time changes.
- Høj/lav lysdæmperkontrol: Adjustable display brightness for comfort.
- Back up Battery: Pre-installed CR2032 battery maintains time settings during power outages.
- Valg af tidszone: Vælg nemt din lokale tidszone.
Overview of the SHARP Digital Alarm Clock's primary features.
Opsætning
- Pak uret ud: Tag forsigtigt uret ud af emballagen.
- Vælg tidszone: Locate the time zone switch on the bottom of the clock. Select your appropriate time zone (EST, CST, MST, PST) before plugging in the unit.
- Tilslut: Connect the power cord to an approved electrical outlet. The clock will automatically set to the correct time based on your time zone selection.
- Indstilling for sommertid (DST): If applicable, slide the DST switch on the bottom of the clock to 'ON' to add one hour (+1 hr.) for Daylight Saving Time, or 'OFF' to subtract one hour (-1 hr.) for Standard Time.
The main unit of the SHARP Digital Alarm Clock, ready for setup.
Betjeningsvejledning
Indstilling af alarm
The alarm function is controlled by buttons located on the top of the clock.
- Indstil alarmtid: Press and hold the 'ALARM' button. While holding, press the 'HOUR' button to adjust the alarm hour and the 'MINUTE' button to adjust the alarm minute. Release the 'ALARM' button when finished.
- Aktiver/deaktiver alarm: Press the 'ALARM ON/OFF' button to toggle the alarm function. An 'ALARM' indicator light on the front display will illuminate when the alarm is active.
- Snooze-funktion: When the alarm sounds, press the large 'SNOOZE' button on top to temporarily silence the alarm for a short period. The alarm will sound again after the snooze period ends.
Dæmperkontrol
Adjust the brightness of the LED display to your preference using the 'DIMMER HI/LO' switch located on the top left of the clock.
- Slide the switch to 'HI' for a brighter display.
- Slide the switch to 'LO' for a dimmer display, suitable for nighttime viewing.
Detaljeret view of the top panel controls for time and alarm settings.
The clock's display with the dimmer function activated, showing reduced brightness.
Batteri backup
The clock includes a pre-installed CR2032 button cell battery. This battery is used to maintain the time settings in the event of a power interruption, ensuring that you do not need to reset the time when power is restored. The battery is located in a screw-secured compartment at the bottom of the clock and is designed to last for several years.
Sådan udskiftes batteriet:
- Tag urets stik ud af stikkontakten.
- Find batterirummet i bunden af uret.
- Unscrew the cover and remove the old CR2032 battery.
- Indsæt et nyt CR2032-batteri, og sørg for korrekt polaritet.
- Replace the cover and screw it securely.
- Sæt uret i stikkontakten igen.
Specifikationer
| Feature | Beskrivelse |
|---|---|
| Mærke | SKARP |
| Model | B08TG8W2QD |
| Farve | Midnight Black-white Led |
| Display Type | Digital |
| Speciel funktion | Automatic Set |
| Produktdimensioner | 5.5 cm B x 2.6 cm H |
| Strømkilde | Elektrisk med ledning, batteridrevet |
| Backup batteri | CR2032 (pre-installed) |
| Varens vægt | 10.2 ounce (0.29 kilo) |
| Rammemateriale | Plast |
Physical dimensions of the alarm clock.
Fejlfinding
- Time Not Setting Automatically: Ensure the time zone switch on the bottom is correctly set for your region. Verify the clock is securely plugged into a working electrical outlet. The internal CR2032 battery is for backup and does not power the main display.
- Skærm for lys/dæmpet: Use the 'DIMMER HI/LO' switch on the top of the clock to adjust the display brightness to your preference.
- Alarmen lyder ikke: Check that the 'ALARM ON/OFF' button has been pressed and the 'ALARM' indicator light on the front display is illuminated. Ensure the alarm time is correctly set.
- Time Reset After Power Outage: If the time resets after a power outage, the internal CR2032 backup battery may be depleted or improperly installed. Refer to the 'Battery Backup' section for replacement instructions.
Opretholdelse
To ensure the longevity and optimal performance of your SHARP Digital Alarm Clock, follow these simple maintenance guidelines:
- Rensning: Wipe the clock's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Udskiftning af batteri: Replace the CR2032 backup battery every few years or if the clock fails to retain time during a power interruption. Refer to the 'Battery Backup' section for detailed instructions.
- Placering: Place the clock on a stable, flat surface away from direct sunlight, excessive heat, or moisture.
Garanti og support
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official SHARP webwebsted. Gem din købskvittering, da købsbevis kan være påkrævet i forbindelse med garantikrav.
