1. Introduktion
This manual provides essential information for the safe and effective use of your Shanrya 30mm Magnetic Speaker. Please read this manual thoroughly before using the product and retain it for future reference.
This speaker is designed for integration into various electronic devices, including car data recorders and electric toys, providing clear audio output.
2. Sikkerhedsoplysninger
Always observe the following safety precautions to prevent damage to the product or injury to yourself:
- Udsæt ikke højttaleren for ekstreme temperaturer, fugt eller direkte sollys.
- Ensure proper polarity when connecting the speaker to avoid damage to the speaker or the audio source.
- Forsøg ikke at skille højttaleren ad eller ændre den. Dette kan ugyldiggøre garantien og forårsage skade.
- Opbevares utilgængeligt for små børn på grund af små dele.
3. Produktet er slutview
Figur 3.1: Forside view of the Shanrya 30mm Magnetic Speaker. This image displays the speaker's black cone and silver metallic rim, indicating its compact and standard design.
Figur 3.2: Bagside view of the Shanrya 30mm Magnetic Speaker. This image highlights the circular magnet at the back and the two solder points for electrical connections, essential for integration.
Figure 3.3: Multiple Shanrya 30mm Magnetic Speakers alongside a visual representation of their technical specifications. This includes details on rated power, AC impedance, DC resistance, resonant frequency, and output sound pressure.
4. Opsætning
Follow these steps to properly set up your speaker:
- Identificér forbindelsespunkter: Locate the two solder points on the rear of the speaker. These are for positive and negative audio signal connections.
- Forbered ledningsføring: Use appropriate gauge wires for your application. Strip a small amount of insulation from the ends of the wires.
- Loddeforbindelser: Carefully solder the wires to the respective positive and negative terminals on the speaker. Ensure a secure and clean connection to prevent signal loss or short circuits.
- Montering: Integrate the speaker into your device's enclosure. The 30mm diameter allows for compact installation. Ensure the speaker is securely mounted to prevent vibrations and optimize sound quality.
- Tilslut til lydkilde: Connect the other ends of the wires to your audio amplifier or device's audio output, observing correct polarity.
5. Betjeningsvejledning
Once the speaker is correctly installed and connected to an audio source, its operation is dependent on the device it is integrated into. The speaker itself does not have controls.
- Lydafspilning: Activate the audio output from your connected device (e.g., car data recorder, electric toy) to produce sound through the speaker.
- Lydstyrkekontrol: Adjust the volume using the controls on your audio source device.
- Lydkvalitet: For optimal sound quality, ensure the speaker is not obstructed and is placed in an appropriate acoustic environment within your device.
6. Vedligeholdelse
The Shanrya 30mm Magnetic Speaker requires minimal maintenance. Follow these guidelines to ensure its longevity:
- Rensning: If necessary, gently wipe the speaker's exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Opbevaring: Når højttaleren ikke er i brug i længere perioder, skal den opbevares køligt og tørt, væk fra direkte sollys og ekstreme temperaturer.
- Inspektion: Periodically inspect the wiring connections for any signs of wear or corrosion. Re-solder or replace wires if necessary.
7. Fejlfinding
Hvis du støder på problemer med din højttaler, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen lydudgang | Incorrect wiring polarity, loose connections, faulty audio source, damaged speaker. | Check wiring for correct polarity and secure connections. Test with a different audio source. Inspect speaker for visible damage. |
| Forvrænget lyd | Overdriving the speaker (too high volume), poor connection, impedance mismatch. | Reduce volume. Check connections. Ensure the audio source's output impedance is compatible with the speaker's 8 Ohm impedance. |
| Lav lydstyrke | Low volume setting on source, weak audio signal, partial short circuit. | Increase volume on the audio source. Verify the audio signal strength. Check for any unintended contact between wires. |
Hvis problemet fortsætter efter at have forsøgt disse løsninger, skal du kontakte kundesupport eller en kvalificeret tekniker.
8. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | chengongo1rm6732cb-01 |
| Type | Magnetisk højttaler |
| Diameter | 30 mm |
| Nominel effekt | 1W |
| Maksimal effekt | 1.5W |
| AC impedans | 8 Ω ± 15% |
| DC-modstand | 7.8 Ω ± 10% |
| Resonant Frequency (Fo) | 550 ± 20% Hz |
| Output lydtryk | 92 ± 3dB |
| Overholdelse | RoHS-kompatibel |
9. Product Returns
For information regarding product returns, please refer to the retailer's return policy. Typically, products can be returned within 30 days of receipt if you change your mind. For defective or damaged products, specific return procedures apply. Please consult the relevant help pages or contact the seller directly for detailed instructions.
Note: This information is based on general return policies and may vary. Always check the specific terms provided by your point of purchase.
10. Kontakt og support
For further assistance or inquiries, please contact Shanrya customer support through your purchase platform or refer to the official Shanrya webwebsted for kontaktoplysninger.
Fabrikant: Shanrya
Model: chengongo1rm6732cb-01
