1. Introduktion
This manual provides instructions for the safe and efficient operation of your Lepro PR210002-US LED Table Lamp. Denne alsidige lamp offers a range of lighting options, including tunable white light, RGB color changing, dimming capabilities, and an auto-off timer. Please read this manual thoroughly before use and retain it for future reference.
Figure 1: Lepro PR210002-US LED Table Lamp.
2. Pakkens indhold
Before proceeding with setup, please ensure all components are present:
- 1 x Lepro PR210002-US LED Table Lamp
- 1 x amerikansk strømadapter
- 1 x Type C USB-kabel
- 1 x Brugermanual (dette dokument)
3. Opsætning
Follow these steps to set up your LED Table Lamp:
- Pakker ud: Fjern forsigtigt alle komponenter fra emballagen.
- Tilslut strøm: Insert the Type C USB cable into the lamp's charging port. Connect the other end of the USB cable to the provided US power adapter, then plug the adapter into a standard wall outlet.
Figure 2: Connecting the lamp to power. The lamp measures 3.9 inches in diameter and 7.1 inches in height, with a 4.9 ft cable.
4. Betjeningsvejledning
The Lepro LED Table Lamp features intuitive touch controls located on the top surface and the base.
Figure 3: Touch Control Overview.
4.1. Tænd/sluk
- Kort tryk: Lightly tap the top touch area (power symbol) to turn the lamp til eller fra.
4.2. Adjusting White Light (Tunable White Mode)
Lamp offers three white light temperatures: 2700K (Warm White), 4000K (Neutral White), and 5700K (Cool White).
- Skift temperatur: Press the 'M' button on the lamp's base to cycle through the white light temperatures (2700K → 4000K → 5700K).
- Juster lysstyrke: While in any white light mode, Langt tryk the top touch area to continuously adjust the brightness from 5% to 100%. Release when desired brightness is reached.
Figure 4: Tunable White Light Options (2700K, 4000K, 5700K).
4.3. RGB Color Changing Modes
Lamp features 7 static RGB colors and an auto-color changing mode.
- Access RGB Modes: Press the 'M' button repeatedly until the lamp enters RGB mode.
- Select Static Color: While in RGB mode, Langt tryk the top touch area to cycle through the 7 available colors. Release when your desired color is displayed.
- Auto Color Changing: Continue pressing the 'M' button after the static RGB colors to activate the auto-color changing mode.
- Adjust Speed (Auto Mode): While in auto-color changing mode, Langt tryk the top touch area to adjust the speed of the color transitions (3-level speed).
Figure 5: RGB Color Changing Mood Light.
4.4. Auto-Off Timer
Lamp includes a convenient auto-off timer function for 30 or 60 minutes.
- Aktiver timer: Press the timer button (clock symbol) on the lamp's base.
- 30-minutters timer: One press activates the 30-minute timer (indicated by one green LED on the base).
- 60-minutters timer: A second press activates the 60-minute timer (indicated by two green LEDs on the base).
- Deactivate Timer: A third press will turn off the timer function (no green LEDs).
Figure 6: Auto-Off Timer Function.
4.5. Hukommelsesfunktion
Lamp retains the last used brightness and color setting when turned off and on again, ensuring a consistent experience.
5. Vedligeholdelse
For at sikre din l's levetid og optimale ydeevneampfølg disse vedligeholdelsesretningslinjer:
- Rensning: Afbryd lamp Sluk for strømmen før rengøring. Brug en blød, tør klud til at tørre l'en af.amp's surface. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Håndtering: Håndter lamp forsigtigt. Undgå at tabe den eller udsætte den for hårde stød.
- Opbevaring: Hvis du opbevarer lamp for an extended period, ensure it is clean and dry. Store it in a cool, dry place away from direct sunlight.
6. Fejlfinding
If you encounter issues with your Lepro LED Table Lamp, se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lamp tændes ikke. | Ingen strømtilslutning. | Ensure the power adapter is securely plugged into a working outlet and the USB-C cable is firmly connected to the lamp. |
| Brightness adjustment is not smooth or lamp turns off when dimming. | Incorrect operation of touch control. | Ensure you are performing a Langt tryk on the top touch area to adjust brightness. A short press will turn the lamp off. Release your finger when the desired brightness is achieved. |
| Colors are not changing or cycling. | Not in RGB mode or incorrect operation. | Press the 'M' button to cycle through modes until RGB mode is active. For static colors, Langt tryk the top touch area. For auto-changing, ensure auto-color changing mode is selected via the 'M' button, then Langt tryk the top touch area to adjust speed. |
| Timerfunktionen virker ikke. | Timer not activated or incorrectly set. | Press the timer button on the base. One green LED indicates 30-minute timer, two green LEDs indicate 60-minute timer. Ensure the correct timer setting is active. |
7. Specifikationer
| Feature | Detalje |
|---|---|
| Modelnummer | PR210002-US |
| Mærke | Lepro |
| Produktdimensioner | 3.9" D x 3.9" B x 7.1" H |
| Varens vægt | 0.85 pund (13.6 ounce) |
| Materiale | Plast |
| Lyskildetype | LED |
| Lysstyrke | 350 Lumen |
| Wattage | 7 watt |
| Voltage | 120 volt (AC) |
| Lys farveindstillinger | 7 Colors + 3 White Light Temperatures (2700K-4000K-5700K) |
| Kontrolmetode | Røre |
| Strømkilde | Elektrisk med ledning |
| Kabellængde | 4 fod |
| Indendørs/Udendørs brug | Kun indendørs brug |
| Vandmodstandsniveau | Ikke vandafvisende |
8. Garanti og support
For warranty information or technical support, please contact Lepro customer service through their official website or the retailer where the product was purchased. Please have your model number (PR210002-US) and purchase details ready when contacting support.
