Brio Universal Manual Drinking Water Pump and Stainless Steel Water Bottle Stand User Manual

Indledning

This manual provides comprehensive instructions for the safe and efficient use of your Brio Universal Manual Drinking Water Pump and Stainless Steel Water Bottle Stand. Please read this manual thoroughly before operation and retain it for future reference.

Produktkomponenter

The Brio Universal Manual Drinking Water Pump and Stainless Steel Water Bottle Stand bundle includes the following components:

• Universal Manual Drinking Water Pump
• Stainless Steel Water Bottle Stand
• 48mm Dispenser Valve
• 55mm Dispenser Valve
• Tube Brush for cleaning

Image showing the Brio Universal Manual Drinking Water Pump and the Stainless Steel Water Bottle Stand with a water bottle. The pump is attached to a water bottle on the left, and the stand with a tilted water bottle and dispenser valve is on the right.

Opsætningsinstruktioner

Manual Water Pump Setup

1. Udpak komponenter: Carefully remove all parts of the manual water pump from its packaging.
2. Saml rør: Connect the rigid plastic tubes to the bottom of the pump head. Ensure they are securely fitted.
3. Juster rørlængde: If necessary, use a clean, sharp tool to cut the lower tube to the appropriate length for your water bottle (2-6 gallons). The tube should reach close to the bottom of the bottle without touching it.
4. Attach Pump to Bottle: Place the pump head onto the opening of your water bottle. Twist or push down firmly to create a secure seal.

Image showing the Brio manual water pump securely attached to the top of a large water bottle, ready for use.

Image illustrating the universal fit of the Brio manual water pump on different sizes of water bottles (2-6 gallons) and how to cut the tubing to fit.

Water Bottle Stand Setup

1. Placer stativet: Place the stainless steel stand on a flat, stable surface, such as a countertop or table.
2. Select Dispenser Valve: Choose the appropriate dispenser valve (48mm or 55mm) for your water bottle's opening.
3. Attach Valve to Bottle: Securely screw or push the selected valve onto the neck of your 3-5 gallon water bottle. Ensure a tight seal to prevent leaks.
4. Place Bottle on Stand: Carefully lift the water bottle with the attached valve and place it onto the stand, ensuring the valve is positioned over the edge for easy dispensing. The bottle should rest securely in the stand's cradle.

Image showing a large water bottle tilted and resting securely on the Brio stainless steel water bottle stand, with a dispenser valve attached.

Image displaying the dimensions of the Brio stainless steel water bottle stand and the two included dispenser valves (48mm and 55mm).

Betjeningsvejledning

Using the Manual Water Pump

1. Forberedelse til dispensering: Place a glass or container under the pump's spout.
2. Pump Water: Press the pump head down repeatedly. Water will be drawn up through the tube and dispensed from the spout. Continue pumping until the desired amount of water is dispensed.
3. Stop dispensering: Release the pump head. The water flow will stop.

Using the Water Bottle Stand with Dispenser Valve

1. Forberedelse til dispensering: Place a glass or container under the dispenser valve.
2. Open Valve: Push the lever or turn the knob on the dispenser valve to open it. Water will flow out.
3. Close Valve: Release the lever or turn the knob back to the closed position to stop the water flow.

Image showing a person dispensing water from a large bottle resting on the Brio stainless steel stand into a glass.

Vedligeholdelse og rengøring

Manual Water Pump Cleaning

1. Skille ad: Remove the pump from the water bottle and disassemble the tubes from the pump head.
2. Clean Tubes: Use the included tube brush to clean the inside of the plastic tubes. Rinse thoroughly with warm water.
3. Clean Pump Head: Wipe the exterior of the pump head with a damp cloth. For internal cleaning, you may flush water through it by pumping clean water.
4. Lufttør: Lad alle komponenter lufttørre helt, før de samles eller opbevares igen.

Water Bottle Stand and Valve Cleaning

1. Remove Bottle and Valve: Take the water bottle off the stand and remove the dispenser valve.
2. Clean Stand: Wipe the stainless steel stand with a damp cloth and mild detergent if necessary. Dry thoroughly to prevent water spots.
3. Clean Valves: Rinse the dispenser valves under warm running water. For thorough cleaning, you may use a small brush to clean any crevices. Ensure no water residue remains inside.
4. Lufttør: Allow the stand and valves to air dry completely before reassembly or storage.

Regular cleaning helps prevent bacteria buildup and ensures the longevity of your product.

Fejlfinding

Specifikationer

Garantioplysninger

Brio products are designed for durability and performance. For specific warranty details, please refer to the documentation included with your purchase or visit the official Brio website. General return policy information indicates a 30-day return period for refund/replacement through Amazon.

Kundesupport

For further assistance, troubleshooting, or inquiries regarding your Brio product, please contact Brio customer support. You can often find contact information on the manufacturer's webwebsted eller via din købsplatform.

Visit the official Brio Store on Amazon: Brio Store

You may also refer to the official User Manual (PDF) available online: Brugervejledning PDF