Spigen Mag Fit bilholder til MagSafe-oplader - brugsanvisning

1. Introduktion

The Spigen Mag Fit Car Mount is designed to securely hold your MagSafe-compatible iPhone and MagSafe charger in your vehicle. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your device.

2. Hvad er der i æsken

• Spigen Mag Fit Car Mount
• Ekstra klæbende tape

Note: The Apple MagSafe charger and a 12V USB-C car charger (20W or higher) are ikke inkluderet og skal købes separat.

3. Kompatibilitet

3.1. Enhedskompatibilitet

• iPhones with MagSafe (iPhone 17 Pro Max, iPhone 17 Pro, iPhone Air, iPhone 17, 16, 15, 14, 13, 12 series)
• iPhones with MagSafe-compatible cases

3.2. Charger Compatibility

• Only compatible with the New 2024 Official Apple MagSafe Charger (Model Number A2580 or A3250)
• Requires a 12V USB-C car charger (20W or higher) for optimal charging performance.

3.3. Køretøjskompatibilitet

• Only compatible with vehicles featuring linear air vents.

4. Opsætning og installation

4.1. Attaching the MagSafe Charger to the Mount

The Spigen Mag Fit Car Mount is designed for a perfect fit with your Apple MagSafe charger. Ensure the charger is properly seated within the mount's housing.

Image: The Apple MagSafe charger is shown being securely placed into the Spigen Mag Fit mount.

4.2. Installing the Mount on Your Car's Air Vent

The mount features an easy application mechanism for a firm grip onto linear air vents. The design ensures minimal obstruction of airflow.

Image: The Spigen Mag Fit car mount is shown securely clipped onto a car's linear air vent.

4.3. Tilslutning til strøm

Connect the USB-C cable from your MagSafe charger to a compatible 12V USB-C car charger (20W or higher) plugged into your vehicle's power outlet. This enables wireless charging for your iPhone.

5. Betjeningsvejledning

5.1. Attaching Your iPhone

Once the MagSafe charger is secured in the mount and powered, simply place your MagSafe-compatible iPhone (or iPhone with a MagSafe case) onto the charger. The magnetic connection will hold your phone securely.

Image: An iPhone is shown magnetically attached to the Spigen Mag Fit car mount, demonstrating the secure hold.

5.2. Justering af Viewi vinkel

The mount features a low-profile design with 360-degree optimal viewing. You can easily rotate and tilt your phone to achieve your preferred viewing angle for navigation or other uses.

Image: An iPhone mounted on the Spigen Mag Fit is shown being adjusted to various viewing vinkler.

6. Vedligeholdelse

• Rensning: Wipe the mount and charger surfaces with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Udluftningskontrol: Periodically ensure the mount remains securely attached to the air vent.
• Kabelstyring: Ensure the charging cable is not kinked or pinched to prevent damage.

7. Fejlfinding

• Telefonen oplader ikke:
  • Ensure your Apple MagSafe charger is correctly inserted into the mount.
  • Verify that your USB-C car charger is 20W or higher and properly connected to a working power outlet in your vehicle.
  • Confirm your iPhone is MagSafe compatible or has a MagSafe-compatible case.
• Mount is not secure on the vent:
  • Ensure your vehicle has linear air vents, as the mount is designed specifically for this type.
  • Check that the vent clip is fully engaged and tightened if adjustable.
  • Use the extra adhesive tape provided if needed for a more secure fit.
• Telefonen holder ikke magnetisk:
  • Ensure your iPhone is MagSafe compatible or using a certified MagSafe case.
  • Remove any non-MagSafe cases or accessories that might interfere with the magnetic connection.

8. Specifikationer

9. Garanti og support

For garantioplysninger og kundesupport henvises til den officielle Spigen website or contact their customer service directly. Details regarding specific warranty periods and support procedures are typically provided with your product packaging or on the manufacturer's webwebsted.