1. Introduktion
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Axton A601 6-Channel Digital Power Amplifier. The Axton A601 is designed to deliver high-quality audio performance in a compact form factor, featuring Class-D technology for efficiency and an aluminum heatsink for optimal heat dissipation. It is fully compatible with vehicles equipped with start/stop automatic systems.
Figur 1: Forside view of the Axton A601 ampløfter, showcasing dens slanke, kompakte design.
2. Opsætning og installation
Proper installation is crucial for optimal performance and safety. Ensure the vehicle's battery is disconnected before beginning installation.
2.1. Forbindelser
- Strømforbindelser: Connect the +12V terminal to the positive terminal of the car battery via a fuse. Connect the GND terminal to a clean, unpainted metal point on the vehicle chassis. Connect the REM (Remote) terminal to the remote output of your head unit.
- Indgangsforbindelser: De amplifier supports both High-Level and Low-Level inputs. Use the appropriate input based on your head unit's output.
- Højttalerudgange: Connect your speakers to the designated channels (CH1/2, CH3/4, CH5/6). The amplifier also supports bridged mode for higher power output to specific channels (e.g., subwoofers).
Figur 2: Øverst view of the Axton A601, showing power, remote, ground, and speaker output terminals.
Figur 3: Nederst view of the Axton A601, illustrating input connections and control knobs for sensitivity, crossover, and bass boost.
2.2. Indledende konfiguration
- Inputtilstand: Select the correct input mode (High-Level or Low-Level) based on your connection type.
- Tænd tilstand: De amplifier features Auto-Turn-On via DC-Offset or Music Signal, eliminating the need for a separate remote wire in some installations.
- Crossover-indstillinger: Adjust the integrated electronic crossover filters (LPF for subwoofers, HPF for satellites) to optimize sound reproduction for your speaker setup.
- 12 dB/Oct. Low-Pass Filter (Subwoofer): 50 – 300 Hz
- 12 dB/Oct. High-Pass Filter (Satellites): 50 Hz
- Sensitivity (Gain): Set the input sensitivity to match the output voltage of your head unit. Start with the minimum setting and gradually increase until desired volume is achieved without distortion.
- Bas boost kontrol: Adjust the bass boost at 45 Hz (0 – 12 dB) to enhance low-frequency response.
3. Betjeningsvejledning
Once installed and configured, the Axton A601 operates automatically with your vehicle's audio system.
- Tænd/sluk: De amplifier will power on automatically when it receives a signal (either remote, DC-offset, or music signal) and power off when the signal is removed.
- Lydafspilning: Play audio through your head unit. Adjust the volume and tone controls on your head unit as usual.
- Bass Level Remote Control: Use the included bass level remote control to conveniently adjust the subwoofer output level from your listening position.
4. Vedligeholdelse
To ensure the longevity and optimal performance of your Axton A601 ampLifier, følg disse enkle vedligeholdelsesretningslinjer:
- Rensning: Tør jævnligt af amplifier's exterior with a soft, dry cloth to remove dust and dirt. Do not use liquid cleaners or solvents.
- Ventilation: Sørg for, at amplifier's heatsink fins are not obstructed. Proper airflow is essential for heat dissipation.
- Forbindelser: Periodically check all power, ground, remote, and speaker connections to ensure they are secure and free from corrosion. Loose connections can lead to performance issues or damage.
- Miljø: Undgå at udsætte amplifier to excessive moisture, direct sunlight, or extreme temperatures.
5. Fejlfinding
If you experience issues with your Axton A601 ampLifier, skal du konsultere følgende fejlfindingsvejledning, før du søger professionel hjælp.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen strøm / Ampkøleren tænder ikke |
|
|
| Ingen lydudgang |
|
|
| Distorted Sound / Noise |
|
|
| AmpOverophedning af væske |
|
|
6. Specifikationer
Detailed technical specifications for the Axton A601 6-Channel Digital Power Amplivligere:
| Feature | Specifikation |
|---|---|
| Modelnummer | A601 |
| Antal kanaler | 6 |
| Output Power @ 4 Ohm | 6 x 100 W |
| Output Power @ 2 Ohm | 6 x 160 W |
| Output Power @ 4 Ohm Bridged | 3 x 320 W |
| Frekvensrespons | 10 Hz – 21 kHz |
| Signal-støjforhold | >86 dB |
| Variable Input Sensitivity | 0.5 – 12 V |
| Integrated Electronic Crossover | 12 dB/Oct. LPF (50 – 300 Hz), 12 dB/Oct. HPF (50 Hz) |
| Bas boost kontrol | @ 45 Hz (0 – 12 dB) |
| Dimensioner (B x H x D) | 282 x 40 x 105 mm |
| Voltage | 10 volt |
| Materiale | Aluminium |
| Overholdelse | CE |
Figure 4: Excerpt from the official manual, detailing the technical specifications of the Axton A601 amplivligere.
7. Garanti og support
Warranty information for the Axton A601 amplifier is not provided in this manual. For detailed warranty terms, technical support, or service inquiries, please refer to the manufacturer's official webwebsted (www.axton.de) or contact your authorized Axton retailer.
