Nilfisk Core 130-6 PowerControl Pressure Washer

Indledning

Thank you for choosing the Nilfisk Core 130-6 PowerControl Pressure Washer. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new pressure washer. Please read this manual thoroughly before assembly, operation, or maintenance to ensure proper use and to prevent injury or damage.

Vigtige sikkerhedsoplysninger

• Brug altid passende personlige værnemidler, herunder øjenbeskyttelse, når du bruger højtryksrenseren.
• Never direct the spray nozzle at people, pets, or electrical equipment. High-pressure spray can cause serious injury.
• Ensure all connections are secure before starting the unit to prevent leaks and potential hazards.
• Brug højtryksrenseren på en stabil, plan overflade for at forhindre, at den vælter.
• Afbryd strømforsyningen, før der udføres vedligeholdelse eller rengøring.
• Hold børn og omkringstående væk fra betjeningsområdet.
• Brug ikke højtryksrenseren, hvis nogen af ​​delene er beskadigede eller mangler.

Produkt overview og komponenter

The Nilfisk Core 130-6 PowerControl pressure washer is designed for efficient cleaning tasks. Familiarize yourself with its main components:

Billede 1: The Nilfisk Core 130-6 PowerControl pressure washer shown with its main unit, high-pressure hose, spray gun, various nozzles (rough and gentle), a patio cleaner attachment, and a foam sprayer bottle. The main unit is blue and black, featuring large wheels for mobility and an integrated hose reel. The 'Power Control' dial is visible on the front panel.

Nøglekomponenter:

• Hovedenhed: Houses the motor, pump, and power control. Features an integrated hose reeler for convenient storage.
• Højtryksslange: Connects the main unit to the spray gun. Designed for quick connection and unscrewing.
• Sprøjtepistol: Handheld device for directing the high-pressure water stream.
• Dyser: Includes various nozzles for different cleaning tasks, such as 'Rough' for stubborn dirt and 'Gentle' for delicate surfaces.
• Patio Cleaner: A rotating brush or spray attachment for cleaning flat surfaces efficiently.
• Foam Sprayer: Bottle attachment for applying detergent or cleaning solutions.
• Power Control Dial: Located on the device for adjusting pressure output.

Opsætningsinstruktioner

1. Udpak komponenter: Carefully remove all parts from the packaging and ensure all components listed in the product overview er til stede.
2. Assemble Handle (if required): Attach the handle to the main unit according to the diagrams in the separate assembly guide.
3. Tilslut vandforsyning: Connect a garden hose (not supplied) to the water inlet on the pressure washer. Ensure the water supply is turned on and free of air. The unit can also draw water from a bucket using a suction function (requires a separate hose, not supplied).
4. Tilslutning af højtryksslange: Attach one end of the high-pressure hose to the outlet on the pressure washer and the other end to the spray gun. Utilize the quick release coupling with anti-drill system for a secure connection.
5. Fastgør dyse/tilbehør: Select the appropriate nozzle or accessory for your cleaning task and attach it to the spray gun.
6. Tilslut strøm: Sæt netledningen i en jordforbundet stikkontakt. Sørg for, at tænd/sluk-knappen på enheden er i 'OFF'-positionen, før du tilslutter den.

Betjeningsvejledning

1. Forberedelse til operation: Ensure the water supply is fully open and there are no kinks in the hoses.
2. Udluftning: Squeeze the trigger on the spray gun to release any air from the system until a steady stream of water flows out.
3. Start enheden: Turn the power switch on the pressure washer to the 'ON' position. The motor will start.
4. Adjust Power Control: Use the on-device power control dial to select the desired pressure level for your cleaning task. Start with a lower setting and increase as needed.
5. Begynd rengøring: Hold the spray gun firmly with both hands and direct the spray at the surface to be cleaned, maintaining a safe distance.
6. Applying Detergent (Optional): If using the foam sprayer, fill it with appropriate detergent, attach it to the spray gun, and apply the solution. Allow it to dwell as recommended by the detergent manufacturer before rinsing.
7. Stop af drift: To temporarily stop, release the spray gun trigger. To stop completely, turn the power switch to 'OFF', then turn off the water supply. Squeeze the trigger to release residual pressure before disconnecting hoses.

Opretholdelse

• Efter hver brug:
  • Turn off the water supply and power.
  • Release residual pressure by squeezing the spray gun trigger.
  • Disconnect hoses and drain any remaining water.
  • Rengør enhedens yderside med annonceamp klæde.
• Rengøring af dyse: Regularly check and clean nozzles for blockages to maintain optimal spray performance.
• Vandfilter: Inspect and clean the water inlet filter periodically to prevent debris from entering the pump.
• Opbevaring: Store the pressure washer in a dry, frost-free environment. Use the integrated hose reeler for neat storage of the high-pressure hose.
• Vinterisering: In cold climates, ensure all water is drained from the pump and hoses to prevent freezing and damage. Consider using a pump protector solution.

Fejlfinding

If you encounter issues not listed here or if solutions do not resolve the problem, please contact Nilfisk customer support.

Tekniske specifikationer

• Mærke: Nilfisk
• Model: Core 130-6
• Varemodelnummer: 128471258
• Strømkilde: Elektrisk med ledning
• Varens vægt: 6.6 kg (14.52 lbs)
• Produktdimensioner: 14.57 x 11.81 x 34.65 tommer
• Maksimal gennemstrømningshastighed: 480 liter i timen
• Certificeringer: CE, CSA

Garanti og kundesupport

Nilfisk products are manufactured to high-quality standards and come with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Nilfisk webwebsted.

For technical assistance, spare parts, or service inquiries, please contact Nilfisk customer support through their official channels. Have your model number (Core 130-6) and item model number (128471258) ready when contacting support.