Rockville SK58 Package Instruction Manual

1. Introduktion

Thank you for choosing the Rockville SK58 Package. This manual provides essential information for the proper installation, operation, and maintenance of your car audio system. Please read it thoroughly before use to ensure optimal performance and safety.

Nøglefunktioner:

• Kraftig basydelse: Delivers 800W peak power (200W RMS) with a single 8" K5 subwoofer in a vented enclosure, tuned at 37 Hz for deep, distortion-free bass ideal for car audio systems.
• Konstruktion af høj kvalitet: Features a fiber-reinforced, non-pressed paper cone and 1.5" 4-layer aluminum voice coils with OFC copper wire for efficient sound and durability in demanding conditions.
• Compact and Efficient Amplivligere: Includes the Rockville dB10 800W mono Class-D amplifier (400W RMS at 4 Ohm), with adjustable crossover and remote sub control for precise audio tuning.
• Easy Installation Kit: Comes with the RWK81 8-gauge wiring kit, including 100% copper RCA cables, power cables, and accessories for a straightforward setup in any vehicle.
• Versatile Car Audio Solution: Perfect for small vehicles or minimalist setups, this package provides impactful bass in a 0.6 cu ft enclosure, compatible with most car audio systems.

2. Opsætning og installation

Proper installation is crucial for the performance and longevity of your SK58 Package. If you are unsure about any steps, consult a professional car audio installer.

2.1 Hvad er der i æsken:

• Sub Enclosure with 8" K5 Subwoofer
• DB10 Amplivligere
• RWK81 8-Gauge Wiring Kit (including RCA cables, power cables, remote wire, ground wire, fuse holder, and terminals)
• Fjernbetjeningsknap til baskontrol

Image: Rockville SK58 Package. This image displays the main components included in the SK58 Package: the 8-inch subwoofer in its enclosure, the DB10 amplifier, and the complete wiring kit.

2.2 Ledningsforbindelser:

The DB10 amplifier requires proper power, ground, and remote connections, as well as audio input from your head unit.

1. Strømtilslutning (+12V): Connect the 8-gauge power cable from the wiring kit to the +12V terminal on the amplifier. Run this cable directly to your vehicle's positive battery terminal, ensuring an inline fuse holder is installed within 18 inches of the battery.
2. Jordforbindelse (GND): Connect the 8-gauge ground cable to the GND terminal on the amplifier. Securely attach the other end to a clean, unpainted metal surface on the vehicle's chassis, ensuring a solid electrical connection.
3. Fjerntænding (REM): Connect the remote turn-on wire to the REM terminal on the amplifier. Run this wire to the remote output of your aftermarket head unit or to an accessory wire that turns on with your vehicle's ignition.
4. Lydindgang (RCA eller højniveau):
   • RCA-indgang: If your head unit has RCA pre-outs, connect the RCA cables from the head unit's subwoofer output to the RCA Input on the amplivligere.
   • Input på højt niveau: If your head unit does not have RCA pre-outs, use the included high-level input harness. Connect the speaker wires from your head unit (or rear speakers) to the corresponding inputs on the harness, then plug the harness into the amplifier's High Level Input port.
5. Subwoofer tilslutning: The K5 subwoofer is pre-wired to the enclosure's terminals. Connect the speaker wire from the amplifier's output terminals to the enclosure's input terminals, ensuring correct polarity (+ to + and - to -).
6. Fjernbetjening til bas: Connect the remote bass control knob to the 'REMOTE' port on the amplifier. Mount the knob in an accessible location in the vehicle's cabin for easy adjustment.

Image: DB10 Amplifier Rear Panel. This image shows the rear panel of the DB10 amplifier, highlighting the +12V, REM, and GND terminals for power connections.

Image: DB10 Amplifier Front Panel. This image displays the front panel of the DB10 amplifier, showing the RCA and high-level inputs, along with various control knobs.

3. Betjeningsvejledning

Når den er installeret, skal du justere ampLifier-indstillinger for at opnå optimal lydkvalitet.

3.1 Amplivligere kontroller:

• Indgangsniveau (gain): Justerer indgangsfølsomheden for amplifier to match the output of your head unit. Start with the gain at minimum and slowly increase it until you hear distortion, then back off slightly.
• Subsonic HPF: Filters out extremely low frequencies that the subwoofer cannot reproduce efficiently, protecting the subwoofer and improving sound quality. For this ported enclosure, set it to 37 Hz.
• Faseskift: Adjusts the phase of the subwoofer output (0° or 180°) to ensure it is in phase with the rest of your car's speakers, preventing cancellation and improving bass impact.
• Bass Equalizer: Provides a bass boost at 45 Hz, adjustable up to 12 dB, allowing you to fine-tune the bass response to your preference.
• Lavpasfilter (LPF): Filters out high frequencies from the subwoofer, ensuring it only plays bass notes. This is adjustable from 50 Hz to 250 Hz. Set it to blend smoothly with your main speakers.

3.2 Remote Bass Control:

The included remote bass control allows you to adjust the subwoofer's output level conveniently from the driver's seat without accessing the amplader direkte.

4. Specifikationer

5. Fejlfinding

If you experience issues with your SK58 Package, refer to the common problems and solutions below:

• Ingen strøm: Check the inline fuse near the battery. Ensure all power, ground, and remote connections are secure and properly wired. Verify the vehicle's battery voltage.
• Ingen lyd: Confirm all RCA or high-level input connections are secure. Check the remote turn-on wire. Verify the head unit's subwoofer output is enabled and the volume is up. Ensure speaker wires are correctly connected to the amplifier og subwoofer.
• Forvrænget lyd: Reducer amplifier's gain (input level). Check for proper crossover settings (LPF and Subsonic HPF). Ensure the head unit's volume is not excessively high, causing distortion before reaching the amplivligere.
• Svag bas: Forøg amplifier's gain. Adjust the Bass Equalizer. Verify the phase setting (0° or 180°). Ensure the subwoofer is properly enclosed and sealed.
• AmpOverophedning af kølemiddel: Sørg for tilstrækkelig ventilation omkring amplifier. Check the impedance of the subwoofer to ensure it matches the amplifier's stable operating range. Reduce the gain if the amplifier is constantly running hot.
• Beskyttelseslampe tændt: This indicates a fault. Check for short circuits in the speaker wiring. Verify the subwoofer impedance. Allow the amplifier to cool down if it's overheating.

6. Garanti og support

The Rockville SK58 Package comes with a limited warranty. For warranty claims or technical support, please contact Rockville customer service.

• Garantitype: Begrænset
• Kontakte: Refer to your purchase documentation or the Rockville webwebsted for supportkontaktoplysninger.