Indledning
Thank you for choosing the Lafocuse DIY 12888 Silent Wall Clock Movement Kit. This kit allows you to create your own personalized wall clock with large, silent-sweep hands. This manual provides detailed instructions for assembly, operation, and maintenance to ensure optimal performance and longevity of your clock.
Produktkomponenter
The Lafocuse DIY 12888 Silent Wall Clock Movement Kit includes the following components:
- 1 x Silent Quartz Clock Movement (12888)
- 1 x Hour Hand (31.3 cm / 12.3 inches)
- 1 x Minute Hand (39 cm / 15.4 inches)
- 1 x Second Hand (optional, if included in your specific kit)
- Mounting hardware (washers, nuts, hanging hook)

Billede: Nærbillede view of the silent quartz clock movement and the large hour and minute hands.
Opsætning og installation
Follow these steps to assemble and install your DIY wall clock movement kit:
- Prepare the Clock Movement: Ensure the clock movement is ready for installation.
- Fjern beskyttelsesfilm: Carefully peel off the transparent protective film from both sides of the clock hands.
- Unscrew Nut: Unscrew the nut from the dial shaft of the clock movement.
- Install Hour Hand: Press the hour hand onto the shaft. Ensure it is firmly seated.
- Install Minute Hand: Press the minute hand onto the shaft. The minute hand has a rectangular hole to fit the shaft.
- Install Second Hand (if applicable): Press the second hand onto the small central post.
- Tighten Nuts: Securely tighten the nuts onto the shaft to hold the hands in place. Ensure the nut is screwed seamlessly.
- Align Hands: Verify that all clock hands are parallel to each other and do not touch or collide. Adjust gently if necessary.

Image: Visual guide illustrating the step-by-step process of attaching the clock hands to the movement mechanism.
Video Guide: Installation Steps
Video: A detailed video demonstration of how to install the clock hands and set up the clock mechanism.

Image: The back of the clock movement, highlighting the designated hole for hanging the clock on a wall using the provided hook.
Operation
- Indsæt batteri: Insert one AA battery into the battery compartment of the clock movement. Ensure the positive (+) and negative (-) terminals are correctly aligned. Do not use Alkaline batteries; too large a current will damage the movement.
- Indstil tid: Adjust the time by rotating the knob on the back of the clock movement. DO NOT rotate the clock hands directly as it will damage the movement.
- Montering på væg: Hang the assembled clock on your desired wall using the hanging hook.
Fejlfinding
If your clock is not functioning correctly, please refer to the following troubleshooting steps:
- Tjek batteriet:
- Ensure the battery is inserted in the correct position (positive and negative terminals aligned).
- Verify that the battery is not depleted. Replace with a fresh AA battery if necessary (non-alkaline recommended).
- Check Clock Hands Alignment:
- Make sure the clock hands are parallel to each other and are not loose or stuck.
- If hands are loose, gently remove them, straighten any bends, and re-install them ensuring they are parallel and do not collide.
- Kontakt support: If the clock still does not work after performing the above checks, please contact Lafocuse customer support for assistance.

Image: Visual troubleshooting guide for common issues, showing correct battery placement and how to ensure clock hands are parallel.
Specifikationer
| Mærke | Lafocuse |
| Modelnummer | ZH0054A |
| Bevægelsestype | 12888 Silent Quartz Movement |
| Hour Hand Length | 31.3 cm (12.3 tommer) |
| Minute Hand Length | 39 cm (15.4 tommer) |
| Suggested Clock Face Diameter | 70 cm - 100 cm (27.5 - 39.4 tommer) |
| Strømkilde | 1 x AA Battery (not included, non-alkaline recommended) |
| Materiale | Metal (hands and dial) |
| Varens vægt | 9.2 ounce |

Image: A diagram illustrating the specific lengths of the hour and minute hands, along with the central movement's dimensions.
Opretholdelse
- Rensning: Wipe the clock hands and movement gently with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Udskiftning af batteri: Replace the AA battery annually or when the clock starts losing time to ensure accurate operation.
- Håndteres med forsigtighed: The clock hands are delicate. Avoid bending or applying excessive force to prevent damage.
Garanti & Support
Lafocuse offers a 3 års kvalitetssikring for this product. If you encounter any quality problems within this period, please do not hesitate to contact us. We are committed to providing a satisfactory solution as soon as possible.
For yderligere hjælp, besøg venligst Lafocuse Store on Amazon.
