Yaheetech Art Craft Drafting Table with Stool Instruction Manual

1. Introduktion

Thank you for choosing the Yaheetech Art Craft Drafting Table with Stool. This manual provides essential information for the safe assembly, operation, and maintenance of your new drafting table. Please read these instructions carefully before use and retain them for future reference.

2. Sikkerhedsoplysninger

ADVARSEL: Exceeding the maximum load capacity may cause damage or injury. Use caution while moving and assembling the heavy table and stool. Follow assembly instructions for a safe setup.

• Sørg for, at alle komponenter er til stede og ubeskadigede før montering.
• Saml produktet på en blød, ren overflade for at forhindre ridser.
• Spænd alle skruer og bolte forsvarligt, men overspænd dem ikke.
• Hold små dele væk fra børn under montering.
• Stå eller sidde ikke på bordpladen.
• Distribute weight evenly on the tabletop and shelves.
• Kontrollér regelmæssigt alle fastgørelseselementer for at sikre, at de forbliver stramme.

3. Produktet er slutview

The Yaheetech Art Craft Drafting Table is designed for various creative and professional tasks, featuring adjustable height and tilt, integrated storage, and a comfortable stool.

Image 1: The Yaheetech Art Craft Drafting Table and accompanying stool, showcasindets overordnede design og funktioner.

Image 2: Detailed dimensions of the drafting table and stool, including tabletop length, width, height range, and stool dimensions.

4. Opsætning og montering

Assembly of the Yaheetech Art Craft Drafting Table requires careful attention to detail. While specific step-by-step instructions are typically provided in the packaging, here are general guidelines and key components to consider:

4.1 Udpakning og komponentkontrol

Carefully unpack all components and lay them out on a clean, soft surface. Verify that all parts listed in your product's assembly guide are present and undamaged. If any parts are missing or damaged, contact customer support immediately.

4.2 Rammesamling

Begin by assembling the main frame of the table. This typically involves attaching the legs to the crossbars using the provided hardware. Ensure all connections are stable before proceeding.

4.3 Tabletop and Adjustment Mechanism Installation

Attach the tabletop to the frame, paying close attention to the tilt and height adjustment mechanisms. These mechanisms allow for flexible positioning of the tabletop.

Billede 3: Nærbillede view of the tabletop's tilt adjustment mechanism, showing the notched bar for angle selection.

4.4 Storage Components and Accessories

Install the fabric drawers, retractable auxiliary surface, and integrated stationery holders. Ensure the pencil ledge is correctly attached and can be adjusted.

Image 4: Detail of the integrated pen holder, cup groove design, and the triangle buckle for adjustable lift.

Billede 5: View of the retractable two-level desktop, fixed anti-skid base, and anti-scratch foot pad design.

Image 6: Instructions for lifting and retracting the adjustable pencil ledge to secure items on the tilted surface.

4.5 Stool Assembly

Assemble the stool according to its specific instructions, ensuring the legs are securely attached to the seat and the footrest ring is stable.

Image 7: Close-up of the stool's faux leather seat, highlighting its soft and comfortable padding.

4.6 Samlingsvideo

5. Betjeningsvejledning

5.1 Adjusting Table Height

To adjust the table height, locate the adjustment knobs on the legs of the table. Loosen the knobs, carefully raise or lower the tabletop to your desired height, and then securely tighten the knobs to lock the table in place. The table height is adjustable from 69.5 cm (27.5 inches) to 92.5 cm (36.5 inches).

5.2 Adjusting Tabletop Angle

The tabletop can be tilted from 0 to 60 degrees. To adjust the angle, lift the tabletop slightly and engage the support mechanism into the desired notch. Ensure the tabletop is securely locked at the chosen angle before placing items on it.

Image 8: The tabletop shown at various tilt angles, illustrating its 0-60 degree adjustability for different tasks like writing, reading, and drawing.

5.3 Using the Retractable Auxiliary Surface

The retractable auxiliary surface can be pulled out to provide additional workspace for a laptop, reference materials, or other items. Push it back in when not needed to save space.

5.4 Utilizing Storage Options

• Skuffer: Use the two nonwoven fabric drawers for storing mobile devices, small tools, or documents.
• Stationery Holders: The detachable tabletop side tray has separate slots for pens, brushes, and other small stationery items.
• Nederste hylde: The metal shelf below the drawers is suitable for storing drawing drafts, paint cans, or other supplies.

6. Vedligeholdelse

• Rensning: Tør bordfladerne af med en blød, tør kludamp klud. Undgå skrappe kemikalier eller slibende rengøringsmidler, der kan beskadige overfladen.
• Fastgørelsesmidler: Periodically check all screws and bolts to ensure they are tight. Re-tighten as necessary to maintain stability.
• Flytning: When moving the table, lift it rather than dragging it to prevent damage to the floor or the table's anti-scratch foot pads.
• Skuffer: The nonwoven fabric drawers can be spot cleaned with a mild detergent if needed.

7. Fejlfinding

7.1 Table Instability

• Spørgsmål: The table feels wobbly or unstable.
• Løsning: Check all assembly screws and bolts. Ensure they are fully tightened. Verify that the table is on a flat, even surface. Adjust the anti-scratch foot pads if necessary to level the table.

7.2 Difficulty Adjusting Height or Tilt

• Spørgsmål: The tabletop height or tilt mechanism is stiff or difficult to operate.
• Løsning: Ensure adjustment knobs are fully loosened before attempting to change position. Check for any obstructions in the mechanism. Apply a small amount of silicone lubricant to moving parts if stiffness persists.

7.3 Damaged or Ripped Drawers

• Spørgsmål: The fabric drawers are damaged.
• Løsning: While the drawers are made of nonwoven fabric, they are designed for light storage. Avoid overloading them or storing sharp objects that could cause tears. If replacement is needed, contact Yaheetech customer support.

8. Specifikationer

9. Garantioplysninger

This Yaheetech product comes with a Limited Warranty. Please refer to the warranty card included with your purchase or visit the official Yaheetech webwebstedet for detaljerede vilkår og betingelser vedrørende dækning og varighed.

10. Kundesupport

For any questions, concerns, or assistance with your Yaheetech Art Craft Drafting Table, please contact Yaheetech customer support. You can typically find contact information on the product packaging, the brand's official webwebstedet eller gennem dit købssted.