Indledning
Thank you for choosing the ASD LED 32 Inch Oval Flush Mount Light Fixture. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before beginning installation and retain it for future reference.
Sikkerhedsoplysninger
ADVARSEL: Risiko for elektrisk stød. Afbryd strømmen ved sikringen eller afbryderen før installation eller service. Alle elektriske forbindelser skal være i overensstemmelse med lokale og nationale elektriske forskrifter (NEC). Hvis du ikke er bekendt med korrekt elektrisk ledningsføring, skal du kontakte en kvalificeret elektriker.
This fixture is designed for use in dry and damp locations. Do not install in wet locations. Ensure all connections are secure and properly insulated. Do not exceed the specified voltage område på 100-277V.
Produktegenskaber
- Bright & Powerful: Equipped with energy-efficient 45W LEDs, delivering 3750 lumens of illumination.
- Tunable Light (3CCT): Offers three selectable color temperatures (3000K warm white, 4000K cool white, 5000K daylight) to customize your lighting ambiance.
- Glat dæmpning: Features flicker-free Triac dimming, allowing brightness adjustment from 10% to 100% with compatible dimmer switches.
- Multi-bindtage Betjening: Operates efficiently within a 100-277V range, ensuring stable performance.
- Lang levetid: Engineered for longevity with an average life of 50,000 hours, providing dependable lighting for over 50 years under normal use.
- Certificeret kvalitet: ETL and Energy Star certified, complying with stringent safety and energy standards.
- Holdbart design: Constructed with a durable alloy steel housing, frosted acrylic shade, and solid metal base, resistant to rust and impacts.
Figure 1: Key Features of the ASD LED Light Fixture.
Figure 2: 3CCT Color Temperature Options.
Installationsvejledning
Nødvendige værktøjer: Screwdriver, Wire Strippers, Drill (if anchors are needed).
Vigtig: Before starting installation, ensure the power supply to the fixture location is turned off at the circuit breaker or fuse box.
- Forbered armaturet: Skru hættemøtrikkerne af mod uret, og fjern forsigtigt metalringen og linsen fra armaturet.
- Fastgør monteringsplade: Attach the mounting plate to the outlet box using two screws. If necessary, use the mounting plate as a template to mark the location for wall anchors. Drill appropriate sized holes for anchors, insert anchors, and then secure the self-tapping screws into the anchors.
- Tilslut ledninger: Connect the electrical wires: Black to Black (Live), White to White (Neutral), and Ground to Ground (Bare Copper or Green). Secure connections with wire nuts. Carefully tuck all wires back into the outlet box.
- Secure Fixture & Select CCT: Feed the self-tapping screws through the keyhole slots on the fixture's back plate and tighten them to secure the fixture to the mounting plate. Before fully securing, locate the CCT switch on the fixture and choose your desired color temperature (3000K, 4000K, or 5000K). Once the CCT is selected, secure the lens and metal ring to the fixture pan using the cap nuts.
Figure 3: Installation Steps.
For a full cut sheet and detailed installation guide, please refer to the official PDF manual: ASD LED Flush Mount Manual (PDF)
Betjeningsvejledning
Once installed and powered, the light fixture can be operated using a standard wall switch. If a compatible Triac dimmer switch is installed, you can adjust the brightness from 10% to 100% by manipulating the dimmer control. The color temperature is set via a switch on the fixture itself during installation and cannot be changed without accessing the fixture.
Opretholdelse
The ASD LED Flush Mount Light Fixture requires minimal maintenance. To clean the fixture, ensure the power is off and allow it to cool. Wipe the exterior surfaces with a soft, dry or slightly damp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler, da disse kan beskadige overfladen eller de elektriske komponenter.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | Ingen strøm til armaturet. Forkert ledningsføring. Defekt kontakt. | Tjek afbryder/sikring. Kontroller ledningsforbindelserne. Test eller udskift kontakten. |
| Lyset flimrer eller dæmpes uventet. | Inkompatibel lysdæmper. Løs ledningsforbindelse. Voltage udsving. | Ensure dimmer is Triac compatible. Kontroller og fastgør alle ledninger. Verify stable power supply (100-277V). |
| Lysudbyttet er for lavt/højt. | Dæmperindstilling. Incorrect CCT selection. | Juster lysdæmperen til det ønskede niveau. Re-check CCT switch setting on fixture (requires re-accessing fixture). |
Specifikationer
| Attribut | Detalje |
|---|---|
| Mærke | ASD |
| Modelnavn | LED Dobbelt Ring Flushmount |
| Varemodelnummer | A-LFMOV-M32D45C-N-2p |
| Farve | Brushed Nickel (2pk) |
| Materiale | Holdbart hus i legeret stål, matteret akrylskærm, mat hvid diffusordæksel, solid metalbase |
| Produktdimensioner | 32.44 cm L x 18.13 cm B x 4.81 cm H |
| Lyskildetype | LED |
| Wattage | 45 watt |
| Lysstyrke | 3750 Lumen |
| Lys farve | 3000K/4000K/5000K (CCT Adjustable) |
| Voltage | 100-277 volt |
| Dæmpbar | Yes (Triac Dimming) |
| Gennemsnitligt liv | 50,000 timer |
| Certificering | ETL, Energy Star, cETL |
| Indendørs/Udendørs brug | Indendørs (Damp Bedømte steder) |
| Varens vægt | 7.8 pund |
| Inkluderede komponenter | Light Fixture, Mounting Plate, Screws, Anchors, Wire Nuts |
Figure 4: Product Specification Diagram.
Garanti og support
This ASD LED Flush Mount Light Fixture is covered by a 5 års producentgaranti. This warranty ensures quality, safety, and a positive user experience. For any questions, technical assistance, or warranty claims, please contact ASD customer support. Contact information can typically be found on the product packaging or the official ASD Lighting webwebsted.
Figure 5: Warranty and Certifications.
Produktanvendelse Eksamples
Figure 6: Versatile Applications of the Light Fixture.
