1. Introduktion
This user manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your VONROC V18-2 Pressure Washer. Please read this manual thoroughly before using the appliance and keep it for future reference. Proper understanding of these instructions will ensure optimal performance and extend the lifespan of your pressure washer.
2. Sikkerhedsinstruktioner
Always observe basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury. This pressure washer is designed for outdoor use only and must be connected to a grounded outlet.
- Elektrisk sikkerhed: Sørg for, at strømforsyningen matcher voltage specified on the rating label. Use a residual current device (RCD) with a tripping current not exceeding 30 mA. Do not operate the appliance with a damaged cord or plug.
- Personlig sikkerhed: Always wear appropriate personal protective equipment, including safety glasses, hearing protection, and protective footwear. Do not direct the water jet at people, animals, electrical equipment, or the appliance itself.
- Vandforsyning: Connect the pressure washer to a cold water supply only. Ensure the water inlet filter is clean and properly installed. Do not use the appliance with contaminated water.
- Operation: Keep the work area clear of bystanders. Never leave the pressure washer unattended while it is running. Before performing any maintenance or cleaning, always switch off the appliance, unplug it from the power source, and release any residual pressure.
- Kemikalier: Use only detergents recommended for pressure washers. Follow the detergent manufacturer's instructions for use and disposal.
3. Produktet er slutview
The VONROC V18-2 Pressure Washer is a powerful cleaning tool designed for various outdoor tasks. It features an 1800W motor, delivering 140 bar of working pressure and a flow rate of 420 L/h. Key components include the main unit, high-pressure hose, spray gun, adjustable nozzle, turbo nozzle, detergent tank, and patio cleaner.
Figur 1: The VONROC V18-2 Pressure Washer shown with its complete set of accessories, including the main unit, spray gun, high-pressure hose, and various nozzles.
Figur 2: En detaljeret view of all included accessories: spray gun, extension lances, adjustable nozzle, turbo nozzle, patio cleaner, high-pressure hose, and cleaning needle.
Nøglefunktioner:
- Kraftig rengøring: 1800W motor with 140 bar pressure for effective dirt removal.
- Integreret opbevaring: Built-in hose reel, spray gun holder, and accessory holders for organized storage.
- Alsidige dyser: Includes a turbo nozzle for stubborn dirt and an adjustable nozzle for sensitive surfaces.
- Vaskemiddeltank: Integrated detergent tank for easy application of cleaning solutions.
- Udvidet rækkevidde: 8-meter high-pressure hose and 5-meter power cable for large cleaning areas.
- Holdbar konstruktion: Robust aluminum pump and copper motor windings for long-lasting performance.
4. Opsætning
Follow these steps to assemble and prepare your pressure washer for use.
- Fastgør hjul og håndtag: Securely attach the wheels and the transport handle to the main unit according to the diagrams in the quick start guide.
- Tilslutning af højtryksslange: Connect one end of the high-pressure hose to the outlet on the pressure washer and the other end to the spray gun. Ensure connections are tight.
- Saml sprøjtepistolen: Attach the desired lance (extension or direct) and nozzle (adjustable or turbo) to the spray gun. Twist until securely locked.
- Tilslut vandforsyning: Connect a garden hose (not included) to the water inlet on the pressure washer. Ensure the water inlet filter is in place. Connect the other end of the garden hose to a cold water tap.
- Fill Detergent Tank (Optional): If using detergent, unscrew the cap of the integrated detergent tank and fill it with a suitable pressure washer detergent. Do not overfill.
Figur 3: Nærbillede view of the integrated detergent tank, showing the inlet for detergent and the water connection point.
5. Betjeningsvejledning
Før du starter, skal du sørge for, at alle forbindelser er sikre, og at vandforsyningen er tændt.
- Udluftning: Squeeze the trigger on the spray gun to release any air from the system. Allow water to flow through until a steady stream is achieved.
- Tænd: Plug the power cord into a grounded electrical outlet. Turn the ON/OFF switch on the pressure washer to the 'ON' position. The motor will start.
- Begynd rengøring: Direct the spray gun at the surface to be cleaned, maintaining a safe distance. Squeeze the trigger to start the high-pressure water flow.
- Brug af dyser:
- Justerbar dyse: Rotate the nozzle head to adjust the spray pattern from a concentrated jet to a wide fan spray, suitable for various cleaning tasks and sensitive surfaces.
- Turbo mundstykke: Provides a rotating jet for powerful cleaning of stubborn dirt on hard, durable surfaces like concrete or stone.
- Påføring af vaskemiddel: If using detergent, ensure the detergent tank is filled. The pressure washer will automatically draw detergent when operating at low pressure or with a specific detergent nozzle (if included). Follow detergent instructions for optimal mixing and application.
Figur 4: An individual demonstrating the use of the pressure washer for cleaning a car, highlighting its versatility for vehicle maintenance.
Figur 5: A close-up shot illustrating the effective cleaning of a car wheel, showing the precision and power of the water jet.
Figur 6: The pressure washer in action, cleaning a patio surface and demonstrating its capability to remove dirt and grime from outdoor flooring.
Lukker ned:
- Slip sprøjtepistolens aftrækker.
- Drej tænd/sluk-knappen til 'OFF'-positionen.
- Sluk for vandtilførslen.
- Tryk på sprøjtepistolens aftrækker for at udløse eventuelt resttryk i systemet.
- Tag netledningen ud af stikkontakten.
6. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer din højtryksrensers lange levetid og optimale ydeevne.
- Rengøring af dyser: If the nozzle becomes clogged, use the included cleaning needle to clear any debris from the nozzle opening.
- Vandindtagsfilter: Kontroller og rengør vandindløbsfilteret regelmæssigt for at forhindre snavs i at trænge ind i pumpen.
- Opbevaring: Before storing, drain all water from the pump, hose, and spray gun to prevent freezing damage in cold weather. Store the pressure washer in a dry, frost-free location. Utilize the integrated storage features for the hose and accessories.
Figur 7: The pressure washer configured for compact storage, demonstrating the integrated hose and accessory holders for neat organization.
7. Fejlfinding
Se dette afsnit for almindelige problemer og deres løsninger.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Motor starter ikke | No power supply; ON/OFF switch is off; Thermal overload activated. | Check power connection and outlet; Turn ON/OFF switch to 'ON'; Allow motor to cool down. |
| Intet tryk eller lavt tryk | Vandtilførsel afbrudt eller begrænset; Luft i pumpen; Tilstoppet dyse; Vandindløbsfilter snavset. | Turn on water supply, check hose for kinks; Purge air from system; Clean nozzle; Clean water inlet filter. |
| Pulserende spray | Air in pump; Clogged nozzle; Insufficient water supply. | Purge air from system; Clean nozzle; Ensure adequate water flow. |
| Opvaskemiddel doseres ikke | Detergent tank empty; Detergent nozzle not selected (if applicable); Clogged detergent line. | Refill detergent tank; Ensure correct nozzle/setting for detergent application; Clean detergent line. |
8. Specifikationer
Technical data for the VONROC V18-2 Pressure Washer.
- Mærke: VONROC
- Model: V18-2
- Strømkilde: Elektrisk med ledning
- Magt: 1800W
- Maks. Tryk: 140 bar
- Max. Strømningshastighed: 420 liter i timen
- Slange længde: 8 meter
- Strømkabellængde: 5 meter
- Produktdimensioner: 35L x 32W x 65H centimeter
- Varens vægt: 8.92 kilo
- Farve: Sort, blå
- Maks. Vandtemperatur: 50°C
9. Garanti og support
VONROC products are manufactured to high-quality standards. In the unlikely event of a defect, please refer to your purchase documentation for warranty details. For technical support, spare parts, or service inquiries, please contact VONROC customer service through their official website or the retailer where the product was purchased. Always provide your model number (V18-2) and proof of purchase when contacting support.
